What is the fuel consumption of the fourth-generation Emgrand?

3 Answers
LincolnRose
08/27/25 5:54am
The fuel consumption of the fourth-generation Emgrand is 6.8L. Fuel consumption calculation method: After refueling, reset the most recently recorded driving mileage of the vehicle. Use the buttons on the dashboard to switch to the last recorded mileage, then press and hold to reset, or use the steering wheel menu to switch to the last recorded mileage, press and hold the confirmation button to clear the mileage. The onboard computer will automatically calculate the average fuel consumption for that driving segment based on the vehicle's fuel consumption and the distance traveled. Fuel consumption introduction: The fuel consumption per 100 kilometers refers to the amount of fuel consumed by a vehicle traveling 100 kilometers at a certain speed on the road. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer under objective conditions using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated as the theoretical experimental fuel consumption data for the model at specified speeds.
Was this review help?
5
1
Share
VonClaire
09/09/25 4:50am
I've been driving the 4th-generation Emgrand for over half a year now, and its daily fuel consumption is quite practical. On average, it's about 6 liters per 100 kilometers, sometimes reaching 7 liters in congested urban areas, while highway cruising can drop it to around 5.5 liters. Several factors affect fuel consumption, such as driving habits. I'm accustomed to gently pressing the accelerator, slowing down in advance, and avoiding sudden braking, which can save at least 10% on fuel costs. Using the air conditioning increases consumption by about 0.5 liters, so in summer, I try to use the external circulation for ventilation. Maintaining tire pressure at 2.5 bar is crucial, as underinflated tires or overloading can lead to higher fuel consumption. Regular maintenance is also important; I change the engine oil and air filter every 5,000 kilometers to ensure the engine runs smoothly, which helps maintain stable fuel consumption. Overall, as a family car, the Emgrand's fuel economy is cost-effective, and keeping monthly fuel expenses between 200 to 300 yuan is easily achievable.
Was this review help?
15
0
Share
Expand All
MarleyLee
10/23/25 5:41am
From a cost-saving perspective, the fuel consumption of the 4th-generation Emgrand is quite friendly. I've done the math—its combined fuel consumption is around 6L/100km, costing about 40 yuan per 100 kilometers. Compared to similar models, it's not the absolute lowest but offers great value for money. To save even more on fuel, pay attention to driving modes: avoid frequent high-speed overtaking and sudden acceleration, as gentle driving can reduce consumption by 15%. For city commuting, traveling during off-peak hours (early morning or late evening) to avoid traffic jams also lowers fuel usage. Additionally, fuel price fluctuations have a direct impact; using standard 92-octane gasoline is sufficient—no need for pricier high-octane options. Maintenance-wise, I recommend regular checks on the fuel system and filters—a small investment to prevent sudden spikes in fuel consumption. Long-term, this car has low upkeep costs, making it ideal for budget-conscious commuters.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

What is the relationship between car power, torque, and horsepower?

Here are the detailed introductions to engine power, torque, and horsepower: 1. Power: Power refers to the work done by an object per unit of time. The greater the power, the higher the rotational speed, and the higher the maximum speed of the car. Maximum power is commonly used to describe the dynamic performance of a car. 2. Horsepower: Maximum power is usually expressed in horsepower (PS) or kilowatts (kW), with 1 horsepower equal to 0.735 kilowatts. 3. Torque: Torque is an important parameter of engine performance, referring to the average torque output from the crankshaft during engine operation. The greater the torque, the higher the engine output, and the faster the change in crankshaft speed, resulting in better climbing ability, starting speed, and acceleration of the car. Maximum torque generally occurs in the medium to low-speed range of the engine, and it tends to decrease as the speed increases. The unit of torque is Newton-meter (N·m) or kilogram-meter (Kg·m).
12
2
Share

Can you park in a yellow-lined parking space?

Yellow-lined parking spaces cannot be parked in. If you encounter a yellow-lined space on the road with a solid line, it indicates that the space is reserved for specific vehicles, such as fire trucks, and other vehicles are not allowed to park there. Below is an introduction to parking spaces: 1. Blue: A roadside parking space marked with a solid blue line indicates long-term free parking, while a dashed line indicates time-limited free parking. 2. White: A roadside parking space marked with a white line indicates paid parking, with some offering 'free parking at night.' Parking should follow the instructions on roadside signs. 3. Yellow: A parking space marked with a solid yellow line is generally reserved for special vehicles (e.g., fire trucks). However, roadside parking spaces marked with a dashed yellow line allow temporary parking but prohibit long-term parking.
13
3
Share

When is the right time to replace spark plugs?

Under normal maintenance conditions, replacement is recommended after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the user manual. Refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 km, ordinary nickel alloy spark plugs at 20,000 km, and iridium spark plugs at 60,000-80,000 km. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure thorough cleaning. Insert the new spark plug into the spark plug hole, hand-tighten it a few turns, then use the socket to tighten further. Reinstall the removed high-voltage distributor wires according to the firing order, then snap the cover back into place.
7
3
Share

How many kilometers does a brand-new car generally have when delivered?

It is generally normal for a brand-new car to have less than 30 kilometers on the odometer when delivered. Here are the details: 1. Actual situation of new car mileage: When a new car arrives at the 4S store, the odometer usually does not show 0 kilometers, but it is normal for it not to exceed 30 kilometers. Domestic new cars mostly have around 10 kilometers on the odometer. 2. Maximum limit of new car mileage: Adding the factory inspection mileage and transportation mileage together, strictly speaking, the total mileage of a domestic new car should not exceed 50km. For imported cars, considering factors such as overseas transportation, port handling, and customs clearance, consumers can still accept a mileage below 100km.
5
0
Share

Will Removing the Rear Windshield Film Damage the Heating Wires?

Here are the specific details about how removing the rear windshield film affects the heating wires:1. Poor-quality film: The heating wires are on the surface of the glass and can be felt as raised lines with your fingers. If the film is of poor quality, removing it may pull off parts of the heating wires.2. High-quality film: If the film is applied properly, there is no need to replace it.3. Careful operation: Removing the film correctly will not damage the heating wires. Avoid pulling directly; instead, spray water to moisten it beforehand.4. Harmful substances: Low-quality sun films contain benzene, formaldehyde, and other chemical materials that can melt and corrode the heating wires under high-temperature sunlight exposure.
16
1
Share

What are the requirements for upgrading from A3 to A1 license?

According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" and the "New Regulations on Streamlining Administration, Delegating Power, and Improving Services", applicants for upgrading to a large passenger vehicle driving license must meet one of the following conditions: Have held a city bus or medium-sized passenger vehicle driving license for at least two years; Have held a large truck driving license for at least three years; Have held a tractor driving license for at least one year. In addition to meeting one of the above conditions, applicants must not have accumulated 12 penalty points in any of the last three scoring cycles before applying. What are the situations where upgrading to A1 is not allowed? According to Article 16 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses", the following circumstances disqualify applicants from obtaining a large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driving license: Being responsible for a fatal traffic accident with equal or greater liability; Driving under the influence of alcohol; Having a driving license revoked or canceled within the past ten years. Requirements for upgrading to A1 license: Height: At least 155 cm; Vision: Naked or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart; Color vision: No red-green color blindness; Hearing: Able to distinguish the direction of sound sources with each ear at 50 cm from a tuning fork; Upper limbs: Both thumbs intact, with at least three other fingers intact on each hand, and normal limb and finger movement; Lower limbs: Both legs intact with normal movement function, and length difference not exceeding 5 cm; Trunk and neck: No movement dysfunction; Age between 22 and 60 years old.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.