What is the fuel consumption of the Ford Territory?

2 Answers
VanAnna
07/24/25 3:32am
Ford Territory's comprehensive fuel consumption per 100 kilometers is approximately 8.3 liters. Additional Information: 1. Fuel consumption generally refers to constant-speed fuel consumption. Constant-speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. 2. These types of vehicles include: 1. M1 category, M2 category with a maximum design total mass not exceeding 3.5 tons, and N1 category compressed natural gas vehicles; M1 category and N1 category vehicles with a maximum design total mass not exceeding 3.5 tons, tested according to the method specified in GB/T-12545.1-2008 "Test methods for fuel consumption of passenger cars". 2. M2 and M3 categories with a maximum design total mass exceeding 3.5 tons, and N2 and N3 categories of compressed natural gas vehicles; M2, M3 categories, and N category vehicles with a maximum total mass greater than or equal to 2 tons, tested according to the method specified in GB/T-12545.2-2001 "Test methods for fuel consumption of commercial vehicles".
Was this review help?
17
3
Share
OEden
08/10/25 11:06pm
I've been driving the Ford Equator for a while now, mainly mixing city and highway driving, and the fuel consumption is quite reasonable overall. According to my actual measurements, the combined fuel consumption is around 10 liters per 100 kilometers. On the highway, it can drop to 9 liters, while in congested city traffic, it might go up to 12 liters, which is still within the normal range. Driving habits are crucial—things like sudden acceleration or prolonged idling can increase fuel consumption. I'm used to smooth starts and regular tire maintenance, which helps save some money on fuel. I chose this car because it's a seven-seat SUV with ample space, perfect for family trips, unlike some compact cars that focus solely on power. The fuel consumption doesn't have a big impact on daily expenses, keeping my monthly fuel costs under 800 yuan, which is quite cost-effective. On weekends, when I take my family out, I don't have to worry about frequent refueling. Overall, I feel this car is well-balanced, offering the practicality of an SUV without being too fuel-hungry.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

Why Do Diesel Vehicles Need to Add Urea?

Diesel vehicles add urea to reduce exhaust emissions and protect the atmospheric environment. Urea is used to convert harmful nitrogen oxides in the exhaust into nitrogen and water. The exhaust emitted by diesel engines is highly polluting to the atmosphere. With increasingly stringent environmental regulations, exhaust treatment systems are required to ensure compliance. The primary harmful substances in diesel exhaust are nitrogen oxides and particulate matter. The exhaust treatment system helps reduce particulate emissions. Once urea is used in the vehicle, it is injected into the exhaust treatment system whenever the engine is running. Under high temperatures, urea decomposes into ammonia gas.
10
0
Share

How to Check the Engine Oil in a Volvo S90?

Volvo S90 Engine Oil Checking Method: Enter the car status interface to view the engine oil level. Note that the oil level display is not a common progress bar but a vertical line, which requires careful observation to see clearly as it is not very obvious on the surface. The Volvo S90 is a luxury sedan under the Volvo brand. In terms of safety features, the Volvo S90 comes standard with the City Safety system, which now includes emergency braking functionality to avoid oncoming vehicles. The Pilot Assist autonomous driving assistance system provides steering support, distance keeping, and speed control assistance in slow, congested traffic conditions and on long-distance highways at speeds up to 130 km/h.
3
1
Share

What is the maximum speed limit for trucks on highways?

On highways, the maximum speed limit for trucks must not exceed 100 kilometers per hour. Highway speed limit regulations: 1. Minimum speed: When driving normally on highways, the minimum speed for motor vehicles must not be lower than 60 km/h. 2. Two lanes in the same direction: The minimum speed for the left lane is 100 km/h. 3. Three or more lanes in the same direction: The minimum speed for the far-left lane is 110 km/h, while the middle lane has a minimum speed of 90 km/h. 4. Small passenger vehicles: The maximum speed limit for small passenger vehicles on highways must not exceed 120 km/h, while other motor vehicles must not exceed 100 km/h, and motorcycles must not exceed 80 km/h.
12
1
Share

What to Do When the Tire Pressure Monitoring Warning Light Comes On?

The tire pressure monitoring warning light comes on should slow down the speed, find a safe place to pull over, turn off the engine, wait for 1 to 2 minutes and then restart the vehicle. After the vehicle runs stably, check the tire pressure value displayed on the dashboard. If the tire pressure light is on due to insufficient or excessive tire pressure, adjustments can be made on the spot. The appropriate tire pressure is 2.4 to 2.5 bar. You should regularly check whether the tire pressure is normal in daily life. The hazards of excessive tire pressure: 1. The friction and adhesion of the tire will be reduced, affecting the braking effect; 2. It will cause steering wheel vibration and deviation, reducing driving comfort; 3. It will accelerate the local wear of the tread pattern in the center of the tire, reducing the tire's service life; 4. The vibration of the car body will increase, indirectly affecting the service life of other components.
5
4
Share

How to Determine if the Expansion Valve is Faulty?

Under standard refrigerant charge and with the engine idling, the low-pressure side of a typical car air conditioning system should read between 0.1-0.25MPa (1-2.5KG/CM2 or 15-35Lbf/in2). If the low-pressure reading falls below or exceeds this range, it indicates a malfunctioning expansion valve. Here are detailed insights about the expansion valve: 1. Working Principle: After passing through the condenser, high-temperature and high-pressure refrigerant undergoes pressure and temperature reduction when flowing through the expansion valve, transforming into low-pressure, low-temperature liquid refrigerant. This process creates optimal conditions for refrigerant evaporation and cooling within the evaporator. 2. Primary Function: The expansion valve throttles and reduces the pressure of high-pressure liquid refrigerant from the dryer, while regulating and controlling the amount of liquid refrigerant entering the evaporator. This adaptation to varying cooling loads prevents compressor liquid slugging.
9
0
Share

What to Do If the Headlights Stay On?

If the daytime running lights stay on, insert the car key and turn it to the position where only the radio is on. Pull the combination switch on the left side of the steering wheel towards the driver's direction while pulling it downward and hold it. Turn on the car key, and after about 3 seconds, a 'dong' sound will indicate that the daytime running lights have been successfully turned off. More details are as follows: 1. It's best not to turn off the daytime running lights: Because car daytime running lights not only make the car look better but also, more importantly, can alert oncoming vehicles, thereby reducing the probability of car accidents. It's like having a warning light in front to signal, making it unlikely for a driver to drive straight into it unless they make a serious mistake and drive forward without looking. Therefore, turning off the daytime running lights is more harmful than beneficial. 2. Benefits of keeping daytime running lights on: Using daytime running lights abroad reduces vehicle accidents by 12.4% and also lowers the fatality rate of car accidents by 26.4%. In short, the purpose of daytime running lights is for traffic safety.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.