What is the fuel consumption of the Ford Mondeo 2.0t?

1 Answers
MacAiden
07/29/25 6:49pm
According to statistics from the Ministry of Industry and Information Technology, the average fuel consumption of the 2013 2.0t Mondeo is 7.9L/100km. Below is relevant information about the 2013 2.0t Mondeo: 1. Body dimensions: The length, width, and height are 4860mm, 1854mm, and 1480mm respectively. The wheelbase is 2850mm. 2. Powertrain: Equipped with a 2.0L turbocharged engine, paired with a 6-speed automatic transmission, delivering a maximum horsepower of 203Ps. 3. Chassis: The drivetrain is front-wheel drive, with a front suspension featuring MacPherson independent suspension and a rear suspension utilizing a multi-link independent suspension.
Was this review help?
15
0
Share
More Forum Discussions

Where is the light switch in a Skoda?

In most sedans, the light switch is integrated into the stalk-type switch on the left side of the steering wheel. Signal lights introduction: Includes turn signals (hazard lights) and brake lights. Proper use of signal lights is crucial for safe driving. Turn signals introduction: Activated when turning, they flash intermittently to alert vehicles and pedestrians in front, behind, and to the sides. Brake lights introduction: With high brightness, they inform following vehicles that the front vehicle is slowing down or stopping. Improper use can easily lead to rear-end collisions. Night driving lights and width marker lights introduction: Driving lights, commonly known as headlights, should be switched to low beam during oncoming traffic and back to high beam afterward to extend visibility and compensate for reduced sight during encounters. Changing between high and low beams is advised when passing intersections or overtaking. Width marker lights, often called parking lights, are used at night to display the vehicle's width and length.
15
5
Share

Can the Rear Seats of the Regal Lie Flat?

The rear seats of the Regal can lie flat. Regal Powertrain: The 1.5T engine delivers a maximum power of 125kW (170PS) and a peak torque of 252Nm. Regal Features: Standard equipment includes a 4.2-inch LCD instrument panel, while mid-to-high trim models also offer an 8-inch full-color trip computer display combined with dual analog gauges, exuding a high-tech feel. An 8-inch central touchscreen is standard across the lineup, with support for both Baidu CarLife and Apple CarPlay. Excluding the base model, all other trims also feature the OnStar Full-Time Online Assistant, enabling convenient functions such as remote start, vehicle status checks, and navigation destination downloads via a mobile app. Regal Exterior: The model showcases distinct family styling cues, with an elongated body profile. The front grille and LED daytime running lights incorporate wing-shaped elements, while higher trims are equipped with Matrix LED headlights that automatically adjust the beam range based on oncoming traffic and driving conditions.
17
1
Share

What are the symptoms of a faulty tensioner pulley in the Teana?

The symptoms of a faulty tensioner pulley are as follows: The greater the power, the louder the abnormal noise: If the tensioner pulley is damaged, there will be noise at 1400-1500 RPM, and the noise will be louder when more power is consumed. Increased resonance and noise: If the tensioner pulley is damaged, the resonance will be very noticeable, with loud noise during rapid acceleration, noise phenomena, and insufficient power. Loss of control over steering and braking: If the tensioner pulley fails while the car is in motion, there will be no brakes and no steering, resulting in very serious consequences. Abnormal noise during startup: If the tensioner pulley is not severely damaged, the vehicle will emit abnormal noise when starting up.
20
4
Share

What does SET mean on a Skoda?

This is used for cruise control. Detailed explanation of SET: SET is the cruise speed control indicator. When you want to set the cruise speed, accelerate the vehicle to the desired speed and press the SET button. At this time, the vehicle speed usually needs to be greater than 30 miles per hour (approximately 48 kilometers per hour). When using cruise speed control, if you step on the brake, the cruise speed controller will stop working. Cruise control system: The cruise control system mainly consists of a command switch, sensors, ECU and actuator. The ECU has two input signals: one is the command speed signal set by the driver as required, and the other is the feedback signal of the actual driving speed. After the controller detects the error between these two input signals, it generates a throttle control signal sent to the throttle actuator, so that the throttle actuator adjusts the opening of the engine throttle according to the throttle control signal to correct the error detected by the electronic control device, thereby keeping the vehicle speed constant.
8
3
Share

What are the distinguishing standards for the Corolla Hybrid version?

Corolla Hybrid version distinguishing standards are as follows: Corolla Hybrid version powertrain: The Hybrid version adopts an oil-electric hybrid system. The Corolla Hybrid series is equipped with a 1.8-liter naturally aspirated engine, paired with an electric motor that delivers a maximum power of 53kw and a maximum torque of 163N·m. Corolla Hybrid version transmission: The Hybrid version is equipped with an E-CVT continuously variable transmission. Corolla Hybrid version body dimensions: The Corolla Hybrid measures 4630mm in length, 1775mm in width, and 1485mm in height, with a wheelbase of 2700mm. Corolla Hybrid version suspension system: The Corolla suspension system features a MacPherson strut independent front suspension and an E-type multi-link independent rear suspension.
7
0
Share

What is the reason for being unable to access the Volkswagen Lavida engine computer?

Main reason is poor engine performance. Exhaust emissions not meeting standards: Poor fuel quality, failed catalytic converter, excessive carbon buildup in intake manifold, clogged fuel injectors, failed oxygen sensor, occasional engine misfires, etc. can all trigger the engine warning light, with poor fuel quality being the most common cause. Replacing the catalytic converter will resolve this. Engine system malfunction: Faulty throttle pedal sensor, throttle position sensor, mass airflow sensor, crankshaft position sensor, or poor wiring connections can all illuminate the engine warning light. These should be repaired or replaced according to relevant maintenance procedures. Transmission system failure: The engine warning light may indicate transmission issues such as internal faults, slipping, or overheating. Professional diagnosis and repair at a service center is required.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.