What is the fuel consumption of the Ford Focus?

1 Answers
AshlynRose
07/30/25 2:23am
Ford Focus fuel consumption is 6.4 liters per 100 kilometers. The following is a related introduction to the Ford Focus: 1. In terms of appearance, the car adopts a crossover-style body kit, including a new front bumper design, adding black wheel arches and side skirts as well as silver underbody protection. For the wheels, the base model is equipped with 17-inch five-spoke aluminum alloy wheels, while the high-end model features the same 18-inch five-spoke two-tone alloy wheels as the overseas version, along with LED headlights. 2. The interior design clearly reflects the Ford family style. The dashboard is wrapped in large areas of soft-touch materials, providing a comfortable feel, and is accented with silver decorative trim in details. In terms of configuration, it is equipped with the Ford Co-Pilot-360 intelligent driving assistance system, including ACC full-speed intelligent adaptive cruise control, parking assistance system, intelligent collision avoidance system, intelligent traffic sign recognition, lane keeping assistance, etc. 3. In terms of power, the domestic Ford Focus is equipped with the same 1.5T inline three-cylinder engine as the standard model. After meeting the China VI emission standards, the maximum power is reduced to 174 horsepower, which is 10 horsepower less than the China V emission version, with a peak torque of 243 Nm. For the transmission system, the new car continues to be matched with an 8-speed automatic transmission.
Was this review help?
18
2
Share
More Forum Discussions

What is the density of gasoline and water?

The density of water is approximately 1000kg/m^3, while the density of gasoline is about 800kg/m^3. The density of gasoline can vary due to seasonal factors. Here are some related details: 1. Density of different gasoline grades: The density of 92-octane gasoline is approximately 0.72g/ml, 95-octane gasoline is about 0.725g/ml, and 98-octane gasoline is around 0.737g/ml. 2. Reasons for different gasoline densities: Higher-octane gasoline has a greater density because gasoline is a mixture. Different grades are formulated by adding various additives to base gasoline. Higher-octane gasoline contains more additives, and since these additives have a higher density than base gasoline, the overall density increases with higher octane ratings.
1
5
Share

What is the general fuel consumption of a scooter?

Scooters generally have a nominal fuel consumption of 2.6~2.8L. It's important to consider whether you're riding in the city or on long-distance trips. Well-known Japanese brands include: 1. HONDA (Honda): The leader in the world of motorcycles and the dominant force in Japanese motorcycles. With deep pockets, it often faces encirclement and sniping from the other three major brands, both on the racetrack and in the civilian motorcycle sector. Fortunately, it always manages to break through, resolving crises and gaining the upper hand. 2. YAMAHA (Yamaha): The perennial second-place finisher, YAMAHA, with its artistic roots, excels in vitality, passion, and boundless creativity. It often plays the role of challenger, daring to confront the leader head-on without losing ground.
17
0
Share

Can I drive in the evening after drinking at noon?

You cannot drive in the evening after drinking at noon. Related information: 1. Reason: It is best to wait a full day before driving after drinking. If you still feel physically uncomfortable after drinking, it means the alcohol has not been completely metabolized, and there is a high probability of being considered drunk driving if you drive at this time. 2. Methods to speed up alcohol elimination: Drink plenty of water to increase urine output, thereby accelerating alcohol excretion. Avoid drinking strong tea, as it can further stimulate the body and increase the burden on the heart. If you consume strong tea after drinking, the acetaldehyde converted from alcohol may not have time to break down and will enter the kidneys with the tea, potentially causing kidney damage.
3
1
Share

What does it mean to check the high-mounted stop lamp?

Checking the high-mounted stop lamp is to warn the vehicles behind, thereby avoiding rear-end collisions. Here is the relevant information: High-mounted stop lamp: Since ordinary cars already have two brake lights installed at both ends of the rear, one on the left and one on the right. Therefore, the high-mounted stop lamp is also called the third brake light, high-mounted brake light, or third stop lamp. Function of the high-mounted stop lamp: The brake lights are installed on both sides of the rear of the car. When the driver steps on the brake pedal, the brake lights will light up and emit red light to remind the vehicles behind to pay attention and avoid rear-end collisions. When the driver releases the brake pedal, the brake lights will turn off.
12
5
Share

Why is the Zotye one-button start not responding?

The reasons for the Zotye one-button start not responding are as follows: 1. Excessive carbon deposits: This non-starting phenomenon is mainly caused by excessive carbon deposits in the idle speed motor, intake tract, intake valve, and combustion chamber. 2. Abnormal combustion: Due to excessive carbon deposits and dirt in the intake tract, the cross-sectional area of the air passage changes, resulting in an overly rich or lean mixture, causing abnormal combustion or engine shaking after starting, or even failure to start. Alternatively, if there is a problem with the fuel injector, such as leakage or excessive carbon deposits, it can cause a lean mixture during startup, leading to difficulty in starting. 3. Faulty carbon canister: A malfunction in the carbon canister or carbon canister solenoid valve can also make starting difficult.
1
1
Share

How many kilometers are required for Subject 3 driving test?

Large and medium-sized buses: The test distance for large buses and medium-sized buses should be no less than 20 kilometers, including no less than 10 kilometers during daytime and no less than 5 kilometers at night. Large vehicles: The test distance for tractors, city buses, and large trucks should be no less than 10 kilometers, including no less than 5 kilometers during daytime and no less than 3 kilometers at night. Small vehicles: The test distance for small cars, small automatic transmission cars, low-speed trucks, and small automatic transmission passenger cars for the disabled should be no less than 3 kilometers, with no less than 20% conducted at night; if no night test is conducted, a simulated nighttime light usage test should be performed.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.