What is the fuel consumption of the Envision idling with AC on for one hour?

2 Answers
MacJackson
07/29/25 4:37am
The fuel consumption of the Envision idling with AC on for one hour is approximately 1-3 liters, varying by model. Hazards of idling with AC on: When the engine operates at low RPM in idle for extended periods, it is more prone to carbon buildup on pistons and valves. Excessive carbon deposits can directly impact fuel economy and may also affect engine performance and even lifespan. Idling: This refers to an operating condition where the engine runs without engaging any gear. The engine speed during idling is called idle speed, which can be adjusted by modifying the throttle opening size.
Was this review help?
17
0
Share
LaIsabelle
08/12/25 8:19am
Regarding the fuel consumption of the Envision idling with the air conditioning on for one hour, from a technical perspective, it depends on the vehicle's year and engine settings. When idling, the engine maintains low-speed operation, with a basic fuel consumption of about 0.6 to 1 liter per hour. Turning on the air conditioning increases the load on the compressor, causing fuel consumption to rise to around 1.5 liters. The Envision typically uses a 2.0L or larger engine, so idling with the air conditioning on for one hour generally consumes about 1.3 to 1.8 liters, depending on the air conditioning temperature and weather conditions. I've tested similar vehicles, and fuel consumption is highest when the temperature is set lower. This results in additional fuel costs of over ten yuan and also accelerates carbon buildup, affecting engine lifespan. It's recommended to avoid prolonged operation in this manner, as it wastes fuel and increases pollution emissions.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

Which gear is best for waiting at a red light?

When waiting at a red light, you can use neutral gear or parking gear. For automatic transmission vehicles, you can switch to neutral or parking gear while waiting at a red light. For manual transmission vehicles, you must shift to neutral gear when waiting at a red light because manual transmission vehicles do not have a parking gear. For automatic transmission vehicles waiting at a red light, you can operate as follows: 1. If the expected waiting time is less than 30 seconds, keep the gear in D (Drive) and apply the foot brake. 2. If the expected waiting time is more than 30 seconds, shift to N (Neutral) and apply the handbrake. 3. If the expected waiting time is more than 2 minutes, shift to N (Neutral), apply the handbrake, and turn off the engine.
6
5
Share

How long can you drive with a punctured run-flat tire?

According to the characteristics of run-flat tires, even when punctured, they can maintain a speed of 80 km/h and allow driving for about an hour, covering nearly 80 kilometers. This helps prevent drivers from getting stranded on remote roads. However, it's important to note that if the run-flat tire is severely damaged, safety precautions should be taken while driving. Here is more information about run-flat tires: 1. The technical name for run-flat tires is "Tire Pressure Monitoring System (TPMS)" tires, abbreviated as RSC. The biggest advantage of run-flat tires is that in the event of a tire leak, even if the air pressure inside the tire is completely lost, the vehicle can continue to drive at a speed of 80 km/h without the immediate need to replace the tire. 2. Although run-flat tires can reduce the impact of a puncture on driving, if the tire pressure is too high or under extreme conditions, a puncture can still occur. The difference is that the vehicle won't break down immediately after a puncture, but it will require speed restrictions, and the remaining drivable distance is very limited.
19
2
Share

Is Ferrari Manual or Automatic?

Ferrari is automatic. Here is an introduction about Ferrari: 1. Introduction: Ferrari is an Italian automobile manufacturer founded by Enzo Ferrari in 1947, headquartered in Maranello, Italy. 2. Positioning: It is the world's second-largest traditional sports car manufacturer, second only to Porsche, primarily producing Formula 1 racing cars, race cars, and high-performance sports cars. 3. Development: It ranked 174th in the 2018 "World's 500 Most Influential Brands" list. Ferrari is renowned for its long-term participation in racing, with its Ferrari team being one of the most successful teams. On the other hand, Ferrari's road cars are seen as symbols of speed, luxury, sexiness, and wealth.
7
5
Share

What is the M gear in an automatic transmission?

M gear is the manual mode of an automatic transmission car. M stands for Manual, meaning entering the manual shifting mode. In manual mode, by manually pushing the gear lever to M+ or M-, the transmission computer will receive commands to upshift or downshift, and then the computer will control the transmission to shift accordingly, simulating manual transmission shifting. Here are the methods for using the M gear: 1. Downshifting to overtake: Switch to M gear, and after the driver presses the accelerator, the vehicle can instantly accelerate with the high torque of a lower gear, completing the overtaking action faster, saving time, and making overtaking safer. 2. Downhill: When an automatic transmission car is going downhill for a long distance, the speed will continuously increase, requiring the use of brakes to control the speed. However, by using the M gear and switching to a lower gear, engine braking can be used to reduce speed, making it safer and also avoiding transmission wear. 3. Uphill: When going uphill, there might be traffic jams. If driving a car with a manual-automatic transmission, keeping the gear in 1st gear is a good way to protect the car's transmission. 4. Highway driving: Using manual mode on the highway allows for quicker acceleration. During emergency braking, transmission braking can also be utilized. When driving at high speed and needing to brake, while pressing the brake pedal, quickly pull the gear lever back continuously to force the car to downshift to a lower gear.
8
2
Share

Should the Geely Vision X6 use 92 or 95 gasoline?

Geely Vision X6 can use 92 gasoline. Differences in gasoline composition: 92 gasoline consists of 92% isooctane and 8% n-heptane, while 95 gasoline consists of 95% isooctane and 5% n-heptane. The main difference lies in the purity of isooctane. The higher the purity of isooctane, the stronger the gasoline's anti-knock performance, and relatively, the price is higher. Stability differences between 92# and 95#: 95 gasoline has better stability and is easier to burn. The two types of gasoline should not be mixed, as it can significantly affect the engine's lifespan. Differences in applicable models: When choosing between 92 and 95 gasoline, it is necessary to follow the car's user manual.
8
3
Share

What Causes Lack of Power During Acceleration in the Regal?

Reasons for lack of power during acceleration in the Regal are as follows: Engine Carbon Buildup: Carbon deposits include cylinder carbon buildup, throttle valve carbon buildup, spark plug carbon buildup, and intake carbon buildup. These areas are directly related to the engine's power output. When excessive carbon accumulates inside the engine, the vehicle's ignition energy decreases, intake efficiency drops, ultimately leading to reduced engine power and symptoms like shaking and lack of acceleration power. Fuel System Malfunction: Using incompatible fuel octane ratings can cause a decrease in the vehicle's output power and reduced performance. Alternatively, if the fuel tank cap vent is blocked, it may fail to meet the required fuel supply, resulting in an overly lean air-fuel mixture and lack of engine acceleration power.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.