What is the fuel consumption of the Enclave 3.6?

2 Answers
DiArianna
07/25/25 11:34am
Taking the 2014 Enclave 3.6L AWD Zhixiang Flagship model as an example, the fuel consumption of this model is 13.1 liters. Its dimensions are 5113 mm in length, 2007 mm in width, and 1842 mm in height, with a wheelbase of 3020 mm. The curb weight is 2316 kg, and the body structure is a 5-door, 7-seat SUV. In terms of power, it is equipped with a 3.6-liter naturally aspirated engine, delivering a maximum power of 215 kW and a maximum torque of 366 Nm. For the suspension, the front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension.
Was this review help?
19
4
Share
Amy
08/11/25 8:02pm
I drove a Buick Enclave 3.6 for several years, and this car is quite fuel-thirsty. In city traffic jams, it can reach 18-20 liters/100 km, while on highways it drops to 13-15 liters/100 km. There are many influencing factors, such as when the air conditioning is always on or when overloaded, it's common to see fuel consumption soar to 25 liters. Low tire pressure also increases fuel consumption. My experience is that regular oil changes and air filter replacements can slightly reduce fuel consumption, but overall it remains relatively high, with monthly fuel costs exceeding 1,000 yuan. I would advise new owners to plan their routes carefully before long trips to avoid unnecessary waste.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

Why Won't My Push-Start Car Ignite?

Here are the specific reasons why a push-start car fails to ignite: 1. Steering Wheel Lock: The steering wheel lock is an anti-theft feature. When the car is turned off, rotating the steering wheel a certain degree from its centered position will activate the lock. In this state, the push-start function won't work. To release the tension and unlock the steering wheel, turn it left and right while pressing the engine push-start button. 2. Smart Key Battery Depletion: When the vehicle's smart key battery is dead, the key's transmission power is too low for the car's sensors to detect it, preventing the push-start system from completing the ignition process.
20
1
Share

What does OBU mean?

OBU stands for On-Board Unit. Here are the specific installation methods for OBU: 1. Attach it to the upper part of the windshield: Open the electronic tag, peel off the adhesive backing, and firmly attach the electronic tag to the upper part of the front windshield. Heating the 3M adhesive appropriately will make the installation more secure; the electronic tag comes with an anti-tamper device, so if it accidentally falls off, please visit a service center to reset it. 2. Press the Bluetooth button: Press the Bluetooth button on the top of the electronic tag, insert the card, and the electronic tag screen will display [Bluetooth is on]. 3. Activate Bluetooth: Turn on your phone's Bluetooth, enter the WeChat mini-program, click [Apply for Card] - [Activate Electronic Tag], and the Bluetooth will automatically sense and activate. 4. Upload photos: Upload a front photo of the vehicle, and it will be ready to use.
2
0
Share

What Causes Intermittent Shaking When the Car Air Conditioner is On?

Here are the specific reasons for intermittent shaking when the car air conditioner is on: 1. Shock absorber system failure: The shock absorber system is mainly responsible for filtering the vibrations generated by the engine during operation. If the shock absorber malfunctions, these vibrations will directly transmit to the steering wheel and the cabin, affecting driving. When the engine is idling, turning on the car's electrical systems can easily cause shaking. The engine increases its load due to the activation of electrical devices, leading to a drop in idle speed. To compensate for the shaking caused by the idle speed drop, the engine automatically increases the RPM. When electrical systems, especially the air conditioner, are turned on, the engine often shakes. This shaking is likely caused by aging shock absorbers and requires timely replacement. 2. Unstable oil pressure: If the engine carbon deposits have been cleaned, the throttle body has been cleaned, and the oil pads have been replaced, but the car still shakes, it is recommended to check the fuel supply pressure and the intake pressure sensor at a repair shop. Abnormal fuel pump supply pressure or incorrect and improper operation of the intake pressure sensor can both cause the car to shake. 3. Cold start: The main reason for car shaking during a cold start is incomplete fuel combustion, resulting in insufficient power. Low ignition energy means that during startup, when the temperature of the fuel and lubricant is low, more fuel is needed to meet the power demand. Over time, the gap in the spark plug electrodes gradually increases, leading to reduced ignition energy and poor fuel atomization, which causes the car to shake. Additionally, aging ignition coils, high-voltage wires of the spark plugs, or electrical leakage can also reduce ignition energy.
8
1
Share

What is Hill Descent Control and is it necessary?

Hill Descent Control is necessary. It allows the driver to smoothly navigate steep downhill sections without needing to press the brake pedal, maintaining full control. Below are solutions for Hill Descent Control malfunctions: 1. Brake pad wear: The brake fluid in the master cylinder reservoir decreases due to brake pad wear, triggering the fluid level indicator alarm. Add brake fluid to the appropriate level. 2. Wheel cylinder leakage: Leakage in the wheel cylinder or other parts of the braking system causes the brake fluid level in the master cylinder reservoir to drop too low, triggering an alarm. Locate the leaking part, repair it properly, and then refill the brake fluid to the appropriate level. 3. Excessive slope: When the vehicle is climbing a steep slope, the excessive angle may cause a false alarm from the fluid level indicator. This situation usually resolves automatically when the vehicle returns to level ground.
3
3
Share

Does turning off the car without shifting to P gear damage the vehicle?

Turning off the car without shifting to P gear can damage the transmission and engine. Below is a detailed introduction to car gear positions: 1. P gear (Parking gear): When the gear lever is in the P position, the transmission is in neutral internally, but the output shaft is mechanically locked. At this time, the car will stop in place even without stepping on the brake. It is generally used for long-term parking. When shifting into P gear, the car must be completely stationary. Do not shift into P gear when the car is not fully stopped, and always engage the handbrake. When parking on a slope, engage the handbrake first before shifting into P gear. 2. R gear (Reverse gear): When the gear lever is in the R position, the rotation direction of the transmission output shaft is opposite to that of the engine, allowing the car to move backward. When shifting into R gear, the car must be completely stationary. Do not shift into R gear when the car is not fully stopped. 3. N gear (Neutral gear): When the gear lever is in the N position, the gears inside the transmission are idling, and the clutch is not engaged, resulting in the minimum load on the transmission. N gear is generally used for short stops, such as waiting at a red light. Additionally, when towing the car, the transmission should be shifted into N gear. 4. D gear (Drive gear): When the gear lever is in the D position, the gears inside the transmission automatically switch between the lowest and highest gears based on factors like vehicle speed and throttle opening, following the preset shifting pattern. In most cases, D gear can be used for driving.
19
1
Share

How to Reset the Car Maintenance Icon?

The method to reset the car maintenance icon: Press and hold the reset button on the car dashboard for 5 to 10 seconds to remove the wrench symbol. Another method is to use the car's onboard computer and reset it from the maintenance settings. The way to remove the wrench symbol on the car dashboard may vary depending on the car model. When the car maintenance reminder light comes on, it indicates that the car needs maintenance. The car maintenance reminder light is very convenient for managing the car's maintenance cycle, eliminating the need for car owners to remember the last maintenance time and driving distance, greatly facilitating their daily car usage. It is important to note that after the car maintenance is completed, the maintenance reminder light should be reset immediately; otherwise, it may cause memory confusion and disrupt the car's maintenance cycle.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.