What is the fuel consumption of the Enclave?

2 Answers
SanHolden
07/24/25 9:48am
The actual measured fuel consumption of the Enclave is around 8-9L. In terms of power: It is equipped with a 2.0T variable-cylinder turbocharged engine, with a maximum power of 174kw and a maximum torque of 350 Nm. Engine series: The engine used in the Buick Enclave is a representative of the eighth-generation Ecotec engine series from General Motors. This engine is primarily developed for fuel economy, with a 16% improvement in fuel efficiency compared to the previous generation. Engine power: The engine incorporates many advanced technologies, achieving significant improvements not only in power but also in fuel economy. The variable valve timing technology used in the engine is also key to improving combustion. The engine always operates within an efficient range during operation, ensuring excellent fuel economy.
Was this review help?
18
2
Share
AveryLee
08/11/25 5:04am
As an SUV enthusiast, I've studied the fuel consumption of many models, and the average fuel consumption of the Enclave typically fluctuates between 11 to 13 liters per 100 kilometers. The specific data depends on the version: for example, the standard model equipped with a 2.0T engine can see fuel consumption soar above 15 liters during city driving in peak traffic congestion, while it drops below 8 liters during steady highway cruising. Factors affecting fuel consumption include a lower drag coefficient compared to average SUVs, increased weight due to spacious interiors, and whether the driving mode is set to eco-friendly options. The new model also features an auto start-stop function that shuts off the engine at traffic lights to reduce losses, helping you save a bit of fuel. Over the long term, a realistic combined fuel consumption is around 10 to 12 liters—not the most fuel-efficient but reasonable, given the vehicle's focus on comfort and space, making it ideal for family trips. For more precise estimates, checking official owner forums and considering your city's road conditions is advisable.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

Where is the USB port located on the Ford Escort?

The USB port on the Ford Escort is located above the central control numeric keypad. The functions of the USB port are: 1. Charging mobile devices; 2. Connecting external storage devices to play music. Taking the 2018 Ford Escort Manual Comfort model as an example, it is a compact car under Changan Ford, with body dimensions of length 4587mm, width 1825mm, height 1490mm, a wheelbase of 2687mm, and a fuel tank capacity of 50 liters. The 2018 Ford Escort Manual Comfort model is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 122PS, a maximum power of 90kW, and a maximum torque speed of 4500rpm.
6
0
Share

What are the precautions for novice drivers on the road?

Precautions for novice drivers on the road are: 1. Try to drive in the middle lane. When there is no median barrier, driving in the middle lane provides time to react in case of an unexpected situation with oncoming traffic, avoiding a head-on collision. 2. Slow down and check carefully when turning. Develop the habit of slowing down significantly when turning (especially at intersections with bicycle lanes or pedestrian crossings) and always observe the conditions of the bicycle lane and pedestrian crossing. 3. Slow down and look both ways at intersections. Cultivate the habit of looking left and right (while slowing down) when crossing an intersection, regardless of whether there is a traffic light or if your lane has a green light. 4. Maintain a safe distance from the vehicle ahead. Develop the habit of keeping a sufficient distance between your car and the one in front when driving outside the city. 5. Check the rearview mirror before braking suddenly. Form the habit of observing the situation of vehicles behind you through the rearview mirror when slowing down at a red light.
2
4
Share

What are the causes of vehicle vibration at high speeds?

Car body vibration at high speeds can be caused by the following reasons: 1. Inaccurate front wheel alignment angle, excessive toe-in; 2. Low front tire pressure or imbalance caused by repairs or other reasons; 3. Deformation of front wheel rims or unequal number of tire bolts; 4. Loose installation of transmission system components; 5. Bent drive shaft, dynamic imbalance, or deformation of the front axle; 6. Failed shock absorbers, inconsistent stiffness of front leaf springs, or frame deformation. Below are the solutions for car body vibration at high speeds: 1. First, lift the drive axle, place safety blocks in front of the front wheels, start the engine, and gradually shift to higher gears to reach the final test vibration speed of the drive wheels. If both the car body and steering wheel vibrate at this point, the vibration is caused by the transmission system, as the front wheels and axle are stationary at this time. If the car does not vibrate at the final test vibration speed, the issue lies with the front axle. 2. Check if the front wheel alignment angles and toe-in meet the requirements and adjust them if necessary; 3. Lift the front axle and test the wheels, checking for static balance and excessive tire deformation. If needed, replace with a good wheel for comparison; 4. Inspect the front axle and frame for deformation, and check if the drive shaft is bent. Perform a dynamic balance test on the drive shaft if possible; 5. Check the stiffness of the front leaf springs, the effectiveness of the shock absorbers, and whether the spring bracket rivets are loose. Replace if performance is inadequate; 6. Inspect the chassis for looseness and check if the ball joints are worn out.
10
3
Share

Which company's engine is used in the GAC Trumpchi GS4?

GAC Trumpchi GS4 is equipped with two different displacement engines. The 1.5L model uses GAC's self-developed 1.5L turbocharged engine, while the other is the latest 200T engine. More information about GAC Trumpchi GS4 engines is as follows: 1. The 1.5L turbocharged engine features dual variable valve timing (intake and exhaust), variable oil pump, silent timing chain, dual-mass flywheel, and GAC's proprietary GCCS (Gasoline-Combustion-Control-System) combustion chamber control technology. Technically speaking, it has reached mainstream domestic standards. 2. The latest 200T engine is a 1.3-liter turbocharged gasoline engine with peak torque reaching 202 N·m. It's precisely because its torque approximates 200 N·m that GAC gave it the resounding name "200T".
1
1
Share

How to Replace the Battery in an Elysion Car Key?

Carefully pry open the edge and remove the upper part of the cover. Use a small flat-head screwdriver to remove the button battery; ensure the battery is correctly installed with the proper polarity. Below is relevant information about the Elysion: 1. The Honda Elysion is a mid-to-high-end MPV launched by Dongfeng Honda, featuring a stylish exterior, smooth lines, a well-designed interior, an elegant dashboard, a spacious and comfortable cabin, and economical fuel consumption. 2. The Dongfeng Honda Elysion is positioned above the Odyssey, with its main competitors being the Nissan Elgrand and Toyota Alphard. 3. The new model has a strong business-oriented design and features dual electric sliding doors. The cabin is equipped with three rows of seats, and the second-row seats can easily form a small meeting space with the third row via a lever mechanism, offering great convenience. 4. The dashboard of the Dongfeng Honda Elysion adopts a layered design, giving it a high-tech appearance. Additionally, the vehicle offers both dark and light interior color options, complemented by wood trim, exuding a luxurious style. 5. The Dongfeng Honda Elysion features a three-row, seven-seat layout with over four seating configuration modes, providing excellent flexibility. 6. As a luxury MPV, the Dongfeng Honda Elysion comes with an extensive list of standard features, including xenon headlights, automatic headlight washers and leveling, dual electric sliding doors, six airbags, VSA (Vehicle Stability Assist), HSA (Hill Start Assist), a rearview camera system, a high-resolution color TFT screen, and a smart key system.
6
5
Share

What are the reasons for the steering wheel not returning to center automatically?

The reasons for the steering wheel not returning to center automatically are: 1. Damage to the external steering gear or the free play adjustment bolt of the steering gear being too tight; 2. Incorrect toe-in or camber angle; 3. Damage to the suspension bushings, causing severe inner tire wear. The solutions for the steering wheel not returning to center automatically are: 1. Adjust the steering knuckle clearance and apply lubricating oil for lubrication; 2. Perform a four-wheel alignment to adjust the toe-in value; 3. Replace the suspension bushings. Methods to prevent the steering wheel from not returning to center include: 1. Observe the steering wheel angle after parking; 2. Determine based on the number of steering wheel turns; 3. Make adjustments by moving the vehicle forward and backward.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.