What is the fuel consumption of the Elantra manual transmission?

1 Answers
EllaLee
07/29/25 11:15pm
The 5th gear constant speed fuel consumption of the Elantra is approximately 6.5L/100KM at 100KM/h, with the most economical speed being 5th gear at 60KM/h, where the constant speed fuel consumption is around 4.5L/100KM. Factors affecting fuel consumption are as follows: Uneven road surfaces increase fuel consumption: Poor road conditions or uneven surfaces force the vehicle to operate in lower gears for extended periods, inevitably increasing fuel consumption; Using the trunk as storage increases fuel consumption: Loading the trunk with unnecessary items increases the vehicle's weight. It's important to note that vehicle weight is directly proportional to fuel consumption. A 10% reduction in weight can lead to a corresponding percentage decrease in fuel consumption; Incorrect driving habits can double or triple fuel consumption: Improper driving habits have the most significant impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues.
Was this review help?
12
3
Share
More Forum Discussions

Why Doesn't Mazda Use Turbocharging?

Here are the specific reasons why Mazda does not adopt turbocharging: 1. Turbocharging can enhance engine power, but the turbo does not engage immediately after the engine starts. Different models have varying settings for turbo engagement timing. In the initial stage of turbo operation, there is a certain delay known as turbo lag, which can provide a poor driving experience. Especially in small-displacement turbocharged engines, it is common to experience insufficient power at low speeds, abrupt acceleration in the mid-range, and again insufficient power at high speeds. Therefore, many Japanese cars that prioritize comfort are reluctant to use turbocharged engines, and many Japanese cars also prefer to use smoother CVT transmissions. 2. Since adding a turbo to the engine increases complexity, maintenance costs for turbocharged models also rise. If issues arise or replacements are needed, it will increase the overall cost of ownership.
4
2
Share

How to Drain Water from Car Doors?

Water in car doors does not require special treatment, as the door drain valves will automatically discharge accumulated water. Below is relevant information about water in car doors: 1. Precautions: If the car door is deformed or covered with excessive dust, asphalt, mud, or other debris around the valve, it may cause the drain valve to clog, affecting drainage efficiency. In such cases, simply pressing the drain valve by hand will widen its gap, allowing you to gently lift it to drain the water. 2. Hazards: If water ingress in car doors is left untreated, it may corrode internal circuits, cause rust on metal components, and potentially affect the operation of power windows. 3. Drainage Methods: For larger amounts of water, you can disassemble the door to check for water in wiring pipes, window mechanisms, and door switches. Wipe or blow dry the water, then reassemble the door as before.
13
0
Share

What's the reason when the fuel tank cap cannot pop out?

When the fuel tank cap cannot pop out, it is most likely caused by the cap being stuck or rusted. In this case, you can slightly use a tool to pry or tap the fuel tank cap while pressing the fuel tank cap switch. Below is relevant information about the fuel tank cap: 1. The fuel tank cap refers to the cap on the car's fuel tank used for storing gasoline. It is square-shaped, made of stainless steel, and has excellent sealing. There is only a small circular opening, about the size of a bottle cap, which facilitates storage. It is usually located at the rear of the car. 2. If the fuel tank cap cannot be opened, you can try starting from the trunk. First, remove the liner inside the trunk that covers the fuel tank. The liner is usually secured by some plastic clips and can be easily pried open with a screwdriver. After removing the liner, you can see the locking mechanism of the fuel tank cap and the cable used for remote operation. Simply pull the cable to open the fuel tank cap. If this doesn't work, you can press the movable part of the locking mechanism while continuously pulling the cable, and the fuel tank cap will open easily. Some car models have a dedicated switch on the locking mechanism; pressing this switch will open the fuel tank cap.
4
1
Share

Is it necessary to leave a triangular window when applying car window film?

It is necessary to leave a triangular window when applying car window film. Below is an introduction regarding the need to leave a triangular window for car window film: 1. Relevant regulations: The Public Safety Industry Standard of the People's Republic of China "GA/T744—2013 Automotive Window Glass Sunshade Film" clearly stipulates that for the front windshield and the area used by the driver to observe the rearview mirror, Class I sunshade film should be applied, with a visible light transmittance ratio greater than 70%. 2. Purpose of leaving a triangular window: To allow the driver to see the rearview mirror more clearly through the window, especially at night when the light is dim, which can affect visibility.
6
4
Share

What tires are used on the Vision SUV?

The Vision SUV uses Chaoyang tires. The tire size is 205/60R16. Chaoyang tires are a brand under Zhongce Rubber Co., Ltd., established in 1966. Chaoyang tires cover passenger car tires, commercial vehicle tires, industrial and engineering tires, agricultural tires, and two-wheeler tires. For the Vision SUV's tires in daily use, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may also pose a risk of tire blowouts at high speeds. Additionally, promptly remove pebbles lodged in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool the tires. In hot weather or during high-speed driving, tires can overheat, and pressure may increase. In such cases, stop to let the tires cool naturally. Avoid releasing air to reduce pressure or splashing water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear from dragging against the road surface.
10
5
Share

Will I be caught if I drive at 60 mph in a 50 mph speed limit zone?

Driving at 60 mph in a 50 mph speed limit zone will result in being caught, with fines and penalties imposed based on the extent of speeding. The penalty standards for speeding are as follows: 1. Exceeding the speed limit by less than 10% results in no fine but 3 demerit points. 2. Exceeding the speed limit by more than 10% but less than 20% incurs a 50 yuan fine and 3 demerit points. 3. Exceeding the speed limit by more than 20% but less than 50% incurs a 200 yuan fine and 3 demerit points. 4. Exceeding the speed limit by more than 50% but less than 70% incurs a 1000 yuan fine, 6 demerit points, and may also result in license suspension. 5. Exceeding the speed limit by more than 70% incurs a 2000 yuan fine, 6 demerit points, and may also result in license suspension.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.