What is the fuel consumption of the Eado XT?

2 Answers
SanGenevieve
07/28/25 9:08pm
The fuel consumption of the Eado XT is 5.9-7.3L per 100 kilometers. The following are the factors affecting fuel consumption and methods to reduce it: Factors affecting fuel consumption: Incorrect driving habits have the greatest impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and braking are the most common issues. Experts have conducted fuel consumption tests during acceleration and found that fuel consumption increases by 2 to 3 times compared to steady-speed driving. Methods to reduce fuel consumption: If you want to save fuel, avoid frequent lane changes, overtaking, and merging. Besides increasing fuel consumption, these actions also raise the probability of accidents, and each gear shift consumes additional fuel. Even in traffic jams, try to queue in order. Cutting in line will only result in more fuel consumption.
Was this review help?
15
2
Share
DiJulianna
08/12/25 1:49am
My 2018 Changan Eado XT with the 1.6L automatic transmission shows around 8.5L/100km for daily city commuting. Last week on the highway with AC on, I managed to bring it down to 6.3L/100km. With its 53L fuel tank filled up, it can cover over 600km. A manual transmission owner in our group chat mentioned achieving just over 7L/100km - honestly, driving habits make a big difference. Frequent hard braking/accelerating can easily add 1L, and underinflated tires secretly guzzle fuel too. In summer with AC on, I've noticed nearly 1L/100km more than spring/autumn - now I've developed the habit of walking around the car to check tires before driving.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

What are the body dimensions of the Dongfeng Nissan Kicks?

The Dongfeng Nissan Kicks has a length, width, and height of 4312mm/1760mm/1613mm, which are official data. The length of the Dongfeng Nissan Kicks refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The naturally aspirated engine of the Dongfeng Nissan Kicks has a maximum power of 90kW and a maximum torque of 143 Nm. This engine reaches its maximum power at 6300 rpm and its maximum torque at 4400 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a continuously variable transmission (CVT). There are national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
14
2
Share

How Often Should a Driver's License Be Inspected?

According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the inspection intervals for different types of driver's licenses vary. Class C driver's licenses do not require annual inspections; they only need to be inspected when the license expires and needs renewal. Class A and B driver's licenses require annual inspections, but if there are no demerit points recorded within a scoring cycle, the inspection for that cycle can be waived. Class A and B driver's licenses must undergo an annual inspection within thirty days after the end of the scoring cycle at the traffic management department of the public security authorities. However, if there are no demerit points for violating traffic safety laws and regulations within a scoring cycle, the inspection for that cycle can be waived. If the inspection is not completed on time, it can be made up within three years. If an A or B class license is not inspected for over three years, it will be downgraded, with the maximum downgrade being to a C1 class license. Class E, D, E, and F driver's licenses do not require annual inspections. They only need to be renewed within three months before the expiration date. If the renewal is not processed after expiration, it can still be done normally within one year. If it exceeds one year, the holder must pass the theoretical test (Subject 1) to renew. However, if the license remains unrenewed for over three years, it will become invalid and can no longer be used.
19
4
Share

What are the methods to activate an ETC tag?

ETC tag activation methods: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth is on". If "Tag invalid" appears when inserting and removing twice without the electronic tag attached, this is normal and does not affect activation. Alternatively, you can directly press the button on the top of the electronic tag to enable the Bluetooth function. Turn on the mobile phone's Bluetooth, open the corresponding mobile APP (usually there is a download QR code on the electronic tag), and enter the device activation interface. Click on device connection and patiently wait for the "Connection successful" prompt. After successful connection, upload a photo of the vehicle's front to complete activation. ETC installation process: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; the red light will briefly turn on, and the OLED screen will display "Tag invalid" or "Please insert card", indicating the device is functioning properly. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then peel off the OBU's adhesive backing and stick it to the installation position, pressing firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the front glass, ensuring the chip is inserted into the OBU device.
13
5
Share

What is the fuel tank capacity of the Toyota Land Cruiser?

The fuel tank capacity of the Toyota Land Cruiser is 138 liters, which is the officially announced data. Owners who have purchased the Toyota Land Cruiser can also check this information on the vehicle's configuration sheet. The fuel grade for the Toyota Land Cruiser is 95, with a fuel consumption of 13.6 to 14.7L per 100 kilometers. A full tank of fuel can cover a distance of 939 to 1015 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is the volume from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is reserved to allow the fuel to expand when the temperature rises without overflowing the tank. If the fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked fuel tank capacity.
13
4
Share

What is the suitable tire pressure for Geely Emgrand GL?

The optimal tire pressure for Emgrand GL should be set between 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. The Emgrand GL's tire pressure monitoring system directly displays on the dashboard. It does not show the specific pressure and temperature of each tire, but only displays a tire pressure warning symbol on the dashboard when abnormalities such as excessively high or low pressure are detected. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system typically alerts when pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the system continues to record the previous data, causing the tire pressure monitoring light to illuminate. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new one.
4
4
Share

What is the normal tire pressure for the Ant?

The normal tire pressure for the Chery Ant ranges between 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data complies with the international GBT2978-2008 standard. To check the current tire pressure of the Ant during daily driving, you can activate the tire pressure monitoring system, and the tire pressure values will be displayed on the central LCD screen of the instrument panel. The specific method is to press the CAR button and switch to the tire pressure monitoring system interface. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern of the tire, shortening its lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically, it will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, a tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring light to illuminate. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the tire inflation valve, monitors the tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will also turn on. For sensor damage, the only solution is to replace it with a new component.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.