What is the fuel consumption of the Dongfeng Fengguang 500 automatic transmission?

Why is there no response when pressing the car key?

Here are the reasons why there is no response when pressing the car key: 1. If you find that the remote key does not respond when unlocking or locking the car, and you observe that the small light on the key does not flash, it is very likely that the battery in the key is low and needs to be replaced. 2. Another possibility is that the key code does not match the vehicle, and it needs to be re-matched using a computer. For the case where the remote key is out of power, you can solve it by replacing the battery. The steps to replace the battery in the remote key are as follows: 1. First, take out the mechanical key so that you can see the gap in the plastic shell. 2. Use a tool to twist along the gap when it is large enough to open the key cover. During the prying process, be careful not to touch the internal circuit to prevent damage to the electrical components, especially before operating in winter, you can touch metal to release the charge in your hand. 3. Pay attention to the positive and negative directions of the key battery and remember them, then take out the battery and replace it. The original battery uses a Panasonic-CR2032 3V button battery, and the installation direction should be consistent with the original direction. 4. Then close the key cover, making sure the position is aligned correctly to prevent damage to the internal circuit during pressing. After installation, you can try whether the functions on the key are normal. If there is still no response, it needs to be sent to a repair shop for inspection.

3

4

Share

What does this yellow exclamation mark on the car dashboard mean?

There are four possible scenarios when a yellow exclamation mark appears on the car dashboard: general malfunction, automatic transmission failure, abnormal tire pressure, or lighting system fault. Below is a detailed analysis of these four situations: General malfunction: A triangle containing an exclamation mark indicates a fault in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor malfunction. It's necessary to visit a 4S shop for inspection to identify the source of the problem. Automatic transmission failure: A yellow gear symbol with an exclamation mark represents the automatic transmission warning light, indicating a transmission fault or that the transmission fluid is below the normal range. The transmission fluid should be replaced promptly. Abnormal tire pressure: An exclamation mark beneath a horizontal line within parentheses signifies the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting system fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue. Additionally, a red exclamation mark within a circled parentheses represents a brake system warning, indicating either a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to prevent accidents.

5

Share

Should You Press the Clutch When Slowing Down at an Intersection?

When slowing down at an intersection, you should press the clutch, as you cannot shift gears without depressing the clutch pedal. As the car's speed decreases, the gear should also be lowered. If the speed decreases without a corresponding gear change, it will result in a situation of high gear at low speed. Here are some relevant details: 1. When a car is in high gear at low speed, it may experience jerking, and in severe cases, the engine may stall, posing safety risks. When braking, you should also press the clutch pedal simultaneously to facilitate timely gear shifting. Once the gear shift is completed, release the clutch pedal. 2. Manual transmission cars typically have five gears, though some models now feature six gears. The more gears a car has, the smoother and quicker the gear shifts will be, with less jerking. When driving downhill, you should not coast with the clutch pressed, as this will accelerate clutch wear and create potential safety hazards. 3. The correct approach is to shift the car into a lower gear and use engine braking to assist in descending the hill, which can also extend the car's lifespan.

19

0

Share

What is ROVELO tire?

ROVELO is a domestic tire brand under Sailun Jinyu Group Co., Ltd. The company has modern tire manufacturing plants in Qingdao, Dongying, Shenyang in China and Tay Ninh in Vietnam, with a natural rubber deep processing base in Thailand, and sales networks and logistics centers in Canada, the UK, and other regions serving the Americas and Europe. Daily tire maintenance tips are as follows: 1. Regularly check tire wear. Generally, car tires can travel 50,000-100,000 kilometers, so it is necessary to regularly check the tire wear condition. If the wear is severe, the tire needs to be replaced. 2. Clean tires frequently. If the tires travel on muddy roads, there will be a lot of dirt. Too many impurities on the wheels will affect driving safety, so the tires also need to be cleaned when washing the car, otherwise the wheels will wear out faster. 3. Wheel alignment is needed. Wheel alignment can improve tire performance and ensure normal vehicle control. Poor wheel alignment can lead to irregular tread wear and shorten tire life. 4. Regularly check inflation and stabilize tire pressure. The wheels bear the weight of the car body, and the pressure of the four wheels needs to be consistent, otherwise the steering wheel will become unstable. Therefore, inflation should be sufficient, and the pressure needs to be stable. 5. The driver should drive gently and have excellent skills. Car maintenance includes the owner themselves. The owner needs to drive carefully and patiently, otherwise severe emergency braking will cause rapid tire wear. 6. Keep the spare tire dry. The spare tire can be used in case of an accident, but it also needs good maintenance. If there is too much moisture, the tire will be damaged.

5

4

Share

What is the basic working principle of a battery?

Battery, also known as storage battery, is a type of cell that works by converting chemical energy into electrical energy. Additional information: 1. Generally, what people refer to as a battery is a lead-acid battery. That is, a battery mainly made of lead and its oxides, with sulfuric acid solution as the electrolyte, using lead plates filled with spongy lead as the negative electrode and lead plates filled with lead dioxide as the positive electrode, and using 22-28% dilute sulfuric acid as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy. When the battery discharges, metallic lead is the negative electrode, undergoing oxidation reaction and being oxidized to lead sulfate; lead dioxide is the positive electrode, undergoing reduction reaction and being reduced to lead sulfate. 2. When the battery is charged with direct current, lead and lead dioxide are generated at the two electrodes respectively. After removing the power source, it returns to the state before discharge, forming a chemical cell. Lead-acid batteries are rechargeable and dischargeable batteries, called secondary batteries, with a voltage of 2V. Usually, three lead-acid batteries are connected in series for use, with a voltage of 6V. In automobiles, six lead-acid batteries are connected in series to form a 12V battery pack. Ordinary lead-acid batteries need to be supplemented with sulfuric acid after a period of use to keep the electrolyte containing 22-28% dilute sulfuric acid.

18

5

Share

How to Avoid Mistaking the Accelerator for the Brake?

To prevent mistaking the accelerator for the brake, generally, you can avoid such situations by paying attention to the following two points: 1. When driving, you must stay focused, be able to detect situations promptly, and slow down in time after noticing them, trying to avoid sudden braking operations that may lead to mistakes in haste. 2. Whenever you are not accelerating or maintaining steady speed, always move your right foot to the brake pedal. This must become an instinct. (Avoid developing the habit of resting your right foot on the cabin floor when not accelerating, as this may result in failing to locate or accurately press the brake in emergencies, greatly increasing the risk of mistaking the accelerator for the brake).

16

2

Share

What is the fuel consumption of the Dongfeng Fengguang 500 automatic transmission?

Why is there no response when pressing the car key?

What does this yellow exclamation mark on the car dashboard mean?

Should You Press the Clutch When Slowing Down at an Intersection?

What is ROVELO tire?

What is the basic working principle of a battery?

How to Avoid Mistaking the Accelerator for the Brake?

What is the Difference Between Formal Import and Small Import?

Can I directly apply for an A1 driver's license?

What to Do When Your Car Has Difficulty Starting in Winter?

Can you turn right on a straight-right turn lane when the light is red?