···
Log in / Register

What is the fuel consumption of the Cruze 1.8 automatic?

6Answers
DiSarah
09/06/2025, 11:57:01 PM

The Cruze 1.8L has a total of 4 models, including the 2013 1.8L-SE AT, 2013 1.8L-SE WTCC Edition AT, 2013 1.8L-SX AT, and 2013 1.8L-SX WTCC Edition AT. These models are equipped with a 147-horsepower engine, and the NEDC fuel consumption is 7.8L per 100 kilometers. The fuel tank capacity of different Cruze 1.8L models varies. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 147-horsepower engine, the fuel tank capacity is 60L, and the distance that can be covered with a full tank is 60/7.8*100=769KM. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

Was this review help?
102
Share
DakotaLee
09/18/2025, 11:20:55 PM

As a long-time owner of a Cruze, I've driven the 1.8L automatic version for several years. Its average fuel consumption is around 9 liters per 100 kilometers, rising above 10 liters in congested urban areas and dropping to about 7 liters during highway cruising. I commute with it daily and find that driving habits significantly impact fuel efficiency – for example, aggressive acceleration and constant air conditioning use tend to waste fuel. After trying smoother acceleration, I managed to save quite a bit. Regular maintenance is also crucial; I change the oil and check tire pressure every six months, which helps maintain stable consumption at 8.5 liters. For new owners, I recommend keeping fuel consumption records to easily spot issues. If consumption rises, don't rush to repairs – first adjust your driving habits, which usually helps. Overall, it's an economical car, well-suited for family use.

Was this review help?
9
Share
Expand All
Christina
11/01/2025, 11:42:15 PM

I tracked the fuel consumption of my 1.8L automatic Cruze for over half a year using an app. Overall, the official data shows 8.5 to 9.5 liters per 100 km. In city driving, it can reach 10 liters, while on elevated highways, it drops to just over 7 liters. I find it quite fuel-efficient with that automatic transmission, as I've compared it with Japanese cars in the same class. The Cruze consumes slightly more in urban conditions but outperforms them on highways. Other factors affecting fuel consumption include AC load and seasonal changes—using the AC in summer adds about 0.5 liters on average. I recommend using a mobile app to log mileage for more accurate real-time monitoring. For maintenance, I regularly clear carbon deposits to prevent engine sluggishness and extra fuel consumption. Overall, this model is above-average in efficiency among automatics, offering both agility and peace of mind in real-world driving.

Was this review help?
20
Share
Expand All
Dave
12/15/2025, 10:46:01 PM

I'm the type of driver who saves fuel efficiently. I've driven a 1.8L automatic Cruze, averaging 9 liters per 100 kilometers, which increases to 10 liters in traffic and drops to 7 liters on highways. To save fuel, I always maintain tire pressure at the standard value and minimize the use of high-speed air conditioning, saving a bit on fuel costs daily. If the car is in good condition, fuel consumption remains more stable.

Was this review help?
19
Share
Expand All
DianaLynn
02/04/2026, 11:38:11 PM

From an environmental perspective, driving my Cruze 1.8 automatic with an average fuel consumption of 9 liters per 100km indicates relatively high emissions—urban driving conditions can push it above 10 liters, significantly increasing the carbon footprint. I always select the eco-driving mode, avoiding sudden braking and acceleration, which helps reduce consumption to around 8.5 liters, saving money while protecting air quality. Long-term, fuel quality and tire pressure checks are crucial as they directly impact engine efficiency; using apps to monitor fuel consumption trends helps identify issues early. This approach makes driving more eco-friendly.

Was this review help?
5
Share
Expand All
AdamLynn
04/30/2026, 03:46:22 PM

During my experience in auto repair, I've encountered many Cruze 1.8 automatic owners who report fuel consumption fluctuating between 8 to 10 liters per 100 kilometers, with higher readings in urban driving. The actual causes vary, such as engine aging leading to decreased fuel efficiency, or carbon buildup on spark plugs causing the system to inject more fuel. From a maintenance perspective, I recommend changing the air filter and engine oil every 5,000 kilometers to maintain stable fuel consumption around 9 liters. Avoid lugging the engine or overloading during driving, as these can easily cause issues. A simple check of the data stream can help diagnose abnormal fuel consumption.

Was this review help?
5
Share
Expand All
More Q&A

How to Engage Reverse Gear in a Haval Manual Transmission?

Haval manual transmission reverse gear engagement method: Hold the gear lever with your right hand, lift the white ring beneath the gear lever with four fingers, then push the gear lever forward to the left to engage reverse gear. Haval is a sub-brand of Great Wall Motors, specializing in SUV models. The Haval H2 is a compact SUV launched by the Haval brand under Great Wall Motors, with body dimensions of 4335mm in length, 1814mm in width, and 1695mm in height, and a wheelbase of 2560mm. The Haval H2 features a new powertrain combination of Great Wall's self-developed 1.5T high-efficiency and energy-saving engine and Getrag wet-type 7DCT transmission, with automatic transmission models standardly equipped with engine intelligent start-stop.
117
Share

What does AMS mean on a car?

AMS on a car stands for the power management system. With the AMS power management system, the generator can measure the battery status through a current sensor, adjust the generator load based on driving conditions, and control battery charging and discharging, thereby improving fuel efficiency and extending battery life. The car battery is an essential part of a vehicle and can be categorized into traditional lead-acid batteries and maintenance-free batteries. Since the battery uses a lead-calcium alloy grid frame, it produces less water decomposition during charging and has lower water evaporation. Additionally, the sealed structure of the casing minimizes sulfuric acid gas emissions. Compared to traditional batteries, it has the advantages of requiring no liquid refills and maintaining charge for a longer period.
104
Share

What brand are the tires on the Haoying?

The tires on the Haoying are Michelin. Below is expanded information about the Haoying's tires: Haoying tire specifications: The Haoying is equipped with Michelin PILOTSPORT4 model tires, with specifications of 225/40R20. Function of tires: Car tires are one of the important components of a vehicle, directly contacting the road surface and working together with the car's suspension to mitigate impacts during driving. They ensure good ride comfort and smooth driving; maintain excellent adhesion between the wheels and the road surface; enhance the car's traction, braking, and maneuverability; and bear the weight of the vehicle.
104
Share

What is the Difference Between P Gear and N Gear in a Car?

N gear and P gear mainly differ in that the vehicle will not turn off when shifted into N gear, while it may turn off when shifted into P gear. Below is a detailed introduction about the P gear and N gear in a car: 1. P gear: When this gear is engaged, the wheels are in a mechanically stable state, preventing any rolling. The vehicle must be completely stopped before using P gear; otherwise, it may damage the mechanical parts of the automatic transmission. Additionally, automatic transmission cars usually have a start switch that allows the engine to start only when the gear is in P or N, preventing the car from suddenly lurching forward if started by mistake in other gears. 2. N gear: Neutral N is equivalent to the neutral gear in a manual transmission and can be used during startup or when towing. When waiting at a signal or in traffic, the gear selector is often kept in D while the brake is pressed. If the stop is brief, this method is suitable. However, for longer stops, it is advisable to shift into N and apply the handbrake firmly.
118
Share

Can Windshield Scratches Be Repaired by Polishing?

Windshield scratches can indeed be repaired through polishing. The specific steps are as follows: 1. Surround the area to be repaired with tape; 2. Clean the glass thoroughly to identify the sanding range, apply polishing solution, and use a specialized polishing wheel with appropriate pressure. Move the polisher at a moderate speed, carefully grinding until the polishing is complete. Polishing can remove oxidation, dullness, and scratches from vehicle paint surfaces, restoring their cleanliness. Polishing refers to a surface finishing method that utilizes mechanical, chemical, or electrochemical actions to reduce surface roughness, achieving a smooth and glossy finish. It involves the use of polishing tools, abrasive particles, or other polishing media to refine the workpiece surface.
119
Share

How thick is the anti-collision beam of the Geely Vision X3?

The thickness of the anti-collision beam of the Geely Vision X3 is 1.2mm, and it adopts a hat-shaped anti-collision beam. The anti-collision beam is the first line of defense in a car's passive safety system, capable of absorbing and mitigating external impact forces, protecting the front and rear parts of the vehicle as an important safety device. Cars are equipped with two anti-collision beams: the front one comes into play when rear-ending another vehicle, while the rear one functions when being rear-ended. The dimensions of the Vision X3 are 4005mm in length, 1760mm in width, and 1575mm in height, with a wheelbase of 2480mm, and it is equipped with a 5-speed manual transmission. The car's engine delivers a maximum horsepower of 109 and a maximum torque of 142 Nm, with a trunk capacity of 400L.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.