What is the fuel consumption of the Cruze 1.6 automatic transmission?

1 Answers
DiIan
07/29/25 8:56pm
The official fuel consumption of the Cruze 1.6 automatic transmission is 7.1L/100km. Here are some related introductions about fuel consumption: 1. Habits and road conditions: Fuel consumption is greatly affected by driving habits and road conditions. Avoid hard acceleration; gradual acceleration from a start is the most fuel-efficient. To save fuel, avoid pressing the accelerator pedal heavily when starting, as this can increase fuel consumption by 2 to 3 times compared to normal acceleration. 2. Braking: Maintaining a safe distance and avoiding frequent braking can save more fuel. If you don't keep a safe distance, you may need to brake frequently on the road. When braking, the gear of an automatic transmission vehicle will drop, and the vehicle will have to accelerate again from a lower gear. Starting from a standstill or a low gear requires the engine to consume more fuel.
Was this review help?
11
4
Share
More Forum Discussions

What Causes a Strong Gasoline Smell Inside the Car?

There are several reasons for a strong gasoline smell inside the car: 1. Aging of the carbon canister rubber hoses. In cars with high mileage, rubber components in the engine compartment are prone to aging. 2. Gasoline pipe leakage. If there is a leak in the gasoline pipe, the smell of gasoline may enter the car through the air conditioning system. 3. Residual gasoline during fuel pump disassembly. The disassembly and installation of the fuel pump must be done inside the car, and some residual gasoline may remain. If not cleaned properly, the smell of gasoline can be noticed during driving. 4. Overfilling the fuel tank. If the fuel tank is overfilled, gasoline may flow into the carbon canister through the pipes. The carbon canister, which is designed to collect gasoline vapors, will release excess gasoline vapors through the vent holes when filled with liquid gasoline. When the air conditioning is in the external circulation mode, the gasoline smell can enter the car.
14
2
Share

Does the 2020 Honda Fit meet China VI emission standards?

2020 Honda Fit does not meet the China VI emission standards; it complies with the China V emission standards. Below is relevant information: 1. China V and China VI refer to the national automobile exhaust emission standards. The larger the number, the more environmentally friendly the vehicle's emissions. 2. The 'China VI' standard is an upgrade of the 'China V' standard. Compared to 'China V', 'China VI' imposes stricter control on pollutant emission limits. The standard reduces carbon monoxide emissions from gasoline vehicles by 50%, total hydrocarbon and non-methane hydrocarbon emission limits by 50%, and nitrogen oxide emission limits by 42%. 3. According to the plan, the 'China VI' standard will be implemented in two phases: 6A and 6B. The first phase starts on July 1, 2020, prohibiting the sale, registration, and licensing of vehicles below the 6A emission standard. The second phase begins on July 1, 2023, prohibiting the sale, registration, and licensing of vehicles below the 6B emission standard. However, these are the national timelines for achieving the 'China VI' standard, and some regions have already decided to implement this standard ahead of schedule. Each change in emission policies profoundly affects the automotive market landscape and consumer decisions.
10
5
Share

What happens if you press the clutch and accelerator simultaneously in a car?

If you press the clutch without releasing the accelerator, the engine continues to work, which may potentially damage it. You should never press the clutch and accelerator simultaneously; always release the accelerator before pressing the clutch. When shifting gears, first apply the brake to reduce speed, then press the clutch to shift. For stopping, you can directly press both the clutch and brake. Additional precautions for gear shifting are as follows: 1. When shifting gears, always release the accelerator before pressing the clutch. The clutch in a car serves to engage and disengage the engine from the wheel transmission. 2. Do not press the clutch and accelerator at the same time. Pressing the clutch cuts off the engine's power transmission, putting the engine in a no-load state. Accelerating in this condition will cause a sudden increase in engine RPM, and you may even hear the engine revving sound.
18
1
Share

How to Use a Manual-Automatic Transmission?

The method of using a manual-automatic transmission is as follows: A manual-automatic transmission only has one additional M gear compared to a regular automatic transmission, while the other gears function the same as in a standard automatic transmission. To use the M gear, shift the gear lever to the M position, allowing the driver to shift gears using either the gear lever or the paddle shifters behind the steering wheel. More information about manual-automatic transmissions is provided below: 1. A manual-automatic transmission refers to an automatic transmission equipped with a manual mode. The manual mode in an automatic transmission is quite useful, as it can be used during spirited driving or when overtaking. 2. Some sports cars feature paddle shifters behind the steering wheel, which can only be used when the M gear is engaged.
2
5
Share

How to Eliminate the Power Steering Malfunction in Malibu?

If the Malibu displays a power steering malfunction warning, it indicates a fault in the vehicle's power steering system that requires immediate inspection and repair. Common issues include abnormal noises during steering, steering gear oil leakage, and weakened automatic return function. Please visit a 4S shop for diagnosis and repair; the fault can be automatically cleared once resolved. Additional Information: Common faults and causes in vehicle steering systems include: 1. Abnormal noises during steering are typically mechanical issues, such as damage to the kingpin and bushing or failure of the column thrust bearing. During inspection, turn the steering wheel left and right to locate the noise source for disassembly and repair. 2. Steering gear oil leakage usually occurs at the steering gear cover, side cover, or the connection between the steering shaft and the pitman arm. These areas have seals, and replacing the oil seals and gaskets can resolve the issue. Leakage in other areas may indicate casting defects or cracks in the steering gear housing. Minor cracks and defects can be sealed with Loctite 290 high-penetration sealant. 3. Most vehicles feature an automatic return function for the steering wheel. In hydraulic-assisted vehicles, this function may weaken due to hydraulic damping but should still retain some capability. If returning the steering wheel requires the same effort as turning it, the return function is faulty, typically due to mechanical issues in the steering system.
13
5
Share

Does Honda Earth Dreams Include Hybrid Systems?

Honda's Earth Dreams technology includes hybrid systems. Here is relevant information: 1. Honda's Earth Dreams hybrid systems can be found in many models. The pure gasoline engines equipped with Earth Dreams technology offer strong power and relatively low fuel consumption. 2. Hybrid systems generally refer to the combination of fuel and electric power. The output characteristics of internal combustion engines and electric motors are opposite: electric motors can deliver strong torque at low speeds, providing ample power for vehicle acceleration from a standstill, while internal combustion engines increase output power and torque as the speed rises, supplying power for mid-to-high-speed acceleration. Besides enhancing the vehicle's power performance, hybrid systems also effectively improve fuel economy.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.