What is the fuel consumption of the Chevrolet Cruze 13?

How many liters of transmission fluid does the Cadillac ATSL require?

The Cadillac ATSL requires 6 liters of transmission fluid. Method for replacing transmission fluid: Loosen the bottom nut of the transmission fluid pan to allow the old fluid to drain naturally by gravity; connect the transmission to a circulation machine via piping, where the new transmission fluid will push out the old fluid under pressure; remove the fluid pan for replacement. Methods to determine if replacement is needed: Pull out the dipstick and smell it closely—if there is a strong sour odor, the fluid has deteriorated and should be replaced; rub the old fluid between your thumb and forefinger repeatedly—if you feel impurities, poor viscosity, or even a gritty sensation, it should be replaced; hold the dipstick at a 45-degree angle under light to observe the fluid droplets—clear visibility without metal particles indicates good condition. If there are many metal particles, replacement is necessary.

18

2

Share

What does an exclamation mark in the car mean?

There are many types of exclamation marks that may appear in a car, including: tire pressure indicator light, lighting fault light, steering system fault light, brake fault light, transmission fault light, and wiper fault light, etc. When the car starts, it performs a self-check, during which the indicator lights undergo functional testing. The indicator lights will automatically turn off after 2 to 3 seconds. If the indicator light remains on continuously, it indicates a problem with the car, and it is recommended to have it checked and repaired. Car fault indicator lights are divided into two types: reminder indicator lights and fault warning lights. Reminder indicator lights are usually yellow, alerting the owner through the indicator light; fault warning lights are usually red, warning the owner if the car has a serious fault.

12

4

Share

What to Do When the Car Window Won't Roll Up?

The solutions for a car window that won't roll up are: 1. Clean the dust. Issues such as tilted glass, difficulty in lifting, or automatic lowering during lifting are caused by excessive dust, which increases resistance in the glass guide channel; 2. Visit a repair station for maintenance. Problems with the window lift motor or mechanism require professional repair or replacement. Methods for initializing the car window: 1. Pull up the window and hold the switch until the glass reaches the top, then continue holding for more than 3 seconds before releasing the switch; 2. Press the switch to lower the glass to the bottom and wait for more than 3 seconds; 3. Pull up the window and hold the switch until the glass reaches the top, then continue holding for more than 3 seconds. Once initialization is complete, the window's original functionality will be restored.

9

5

Share

What does ECON mean on Honda cars?

Honda ECON is the abbreviation for the low-carbon and eco-friendly driving mode in Honda vehicles. This button can turn the energy-saving mode on or off. Currently, cars generally offer three driving modes to choose from: energy-saving mode, comfort mode, and sport mode. Below is information about these three modes: Energy-saving mode: When the car is in this mode, fuel consumption is relatively low. In this state, the sensitivity of the accelerator pedal decreases, and the transmission shifts up more aggressively. Comfort mode: This mode can be considered a normal operating mode for the car. In this mode, the accelerator pedal response is more sensitive than in the energy-saving mode. Sport mode: Sport mode can be used during aggressive driving. After activating sport mode, the accelerator pedal response becomes very sensitive, and the transmission delays shifting. The transmission will only upshift after the engine speed reaches the redline. After switching to sport mode, the engine speed will remain around 3,000 RPM, ensuring better power response during acceleration. When the car enters ECON mode, it can achieve reduced fuel consumption and energy savings, but the car's power output will be weakened. ECON can be understood as the abbreviation for 'economy.' In most cases, it is recommended to keep ECON mode on. Only when high torque output is needed (such as when climbing a hill) or when driving at very high speeds should ECON mode be turned off. After pressing the ECON button, the car enters the low-carbon and eco-friendly driving mode. Subsequently, the ECU, engine, and transmission intelligently execute the driver's intentions in the most fuel-efficient manner, achieving optimal fuel economy through rapid upshifts and smooth acceleration. When the driver presses the accelerator pedal deeply, the ECON system effectively controls the opening and closing of the intake valves to ensure smooth engine operation and energy savings. Although ECON mode is simple and effective to operate, it may not function under certain conditions: When the vehicle speed exceeds 120 km/h, priority is given to speed, and the energy-saving mode automatically deactivates. This means that if the car exceeds the economical speed range (typically between 60-90 km/h), the ECON mode will not save fuel. The key to ECON mode is that it operates independently via the car's computer while driving. Therefore, it does not work when the car is idling, in neutral (N), park (P), or manual mode. When overcoming significant resistance or requiring high torque output, such as when climbing a hill, the ECU prioritizes ensuring sufficient power to drive the car, and ECON mode will not function in such cases.

19

4

Share

At What Moisture Content Should Brake Fluid Be Replaced?

Brake fluid should be replaced when its moisture content exceeds 2.5%. The characteristics of brake fluid are: 1. It has a very low freezing point, maintaining good fluidity in low-temperature conditions; 2. It has an extremely high boiling point, preventing vapor lock in high-temperature conditions; 3. It undergoes minimal quality changes during use, avoiding corrosion of metals and rubber. The working principle of brake fluid is that it is an indispensable part of the braking system, serving as an incompressible medium for force transmission within the system. The pressure output from the master cylinder is directly transmitted to the wheel cylinders through the brake fluid. In a sealed container or a fluid-filled pipeline, when the fluid is subjected to pressure, the pressure is quickly and uniformly transmitted throughout the fluid.

11

1

Share

What is the logo of KIA cars?

KIA is the logo of the South Korean automaker Kia Motors. The KIA logo symbolizes an eagle soaring in the blue sky, representing Kia's vigorous development and boundless aspirations. In 2000, Kia merged with Hyundai to form the Hyundai-Kia Automotive Group. In the Chinese market, Kia collaborates with Dongfeng Motor Group to establish Dongfeng Yueda Kia, bringing models such as the Sportage, KX3, KX5, K2, and K5. Among them, the Kia K5 is a mid-to-high-end sedan under Dongfeng Yueda Kia. In terms of body dimensions, it measures 4845mm in length, 1835mm in width, and 1455mm in height, with a wheelbase of 2795mm.

5

Share

What is the fuel consumption of the Chevrolet Cruze 13?

How many liters of transmission fluid does the Cadillac ATSL require?

What does an exclamation mark in the car mean?

What to Do When the Car Window Won't Roll Up?

What does ECON mean on Honda cars?

At What Moisture Content Should Brake Fluid Be Replaced?

What is the logo of KIA cars?

What is the fuel consumption per 100 kilometers for the Nissan Qashqai?

How long is the Regal?

How is the reputation of Dongfeng Fengxing T5EVO?

Why Are Used LaCrosse Cars So Cheap?