What is the fuel consumption of the Chery GX?

1 Answers
DelilahMarie
07/30/25 9:28am
The fuel consumption of the Chery GX is approximately 7 liters. Below is a related introduction to the Chery GX: 1. Its dashboard is made of liquid crystal material, and the central control panel has been upgraded to the highest level, paired with a more comfortable size, enhancing the overall visual effect. Additionally, the air conditioning adjustment buttons allow the driver to switch settings smoothly for the desired comfort. 2. The central control panel features buttons on both sides, which produce a mechanical-style sound when pressed. The integrated network connection is also very fast, making travel more convenient.
Was this review help?
17
5
Share
More Forum Discussions

What are Front and Rear Parking Radars?

Front and rear parking radars are important safety assist devices. Their function is to detect obstacles in front of or behind the vehicle during parking or U-turns, providing the driver with necessary information such as distance, direction, and area of obstacles, while also issuing alarm alerts when approaching obstacles. Front and rear parking radars offer significant assistance to drivers during parking and in congested traffic, helping to avoid unnecessary accidents. The front radar probe is installed on the front bumper and radiates at approximately a 45-degree angle to search for targets in all directions. When the gear lever is shifted into reverse, the parking radar automatically activates. If the probe detects an object behind the vehicle, the buzzer sounds an alert. As the vehicle continues to reverse, the frequency of the alarm sound gradually increases, eventually becoming a continuous tone.
10
2
Share

Is the Baojun RM5 an MPV model?

The Baojun RM5 is an MPV model, featuring a 5-door, 5-seat configuration. Its body dimensions are: length 4705mm, width 1806mm, height 1625mm, with a wheelbase of 2750mm. It has a fuel tank capacity of 48 liters and utilizes a front-engine, front-wheel-drive layout. The front suspension employs a MacPherson strut independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The Baojun RM5 is equipped with a 1.5T turbocharged engine paired with a 6-speed manual transmission, delivering a maximum power of 108 kW at 5200 rpm and a peak torque of 250 Nm between 2200 to 3400 rpm.
2
3
Share

Where is the cabin air filter located on a BMW 528?

The cabin air filter on a BMW 528 is located in the engine compartment, adjacent to the engine hood support rod. The BMW 528 is a mid-to-large-sized 4-door 5-seater sedan with the following body dimensions: length 5055mm, width 1860mm, height 1491mm, wheelbase 3108mm, and a fuel tank capacity of 70 liters. The BMW 528 is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 180 kW and a maximum torque of 350 N·m. It features rear-wheel drive with front double-wishbone independent suspension and rear multi-link independent suspension.
7
1
Share

Why does the water temperature rise slowly?

Slow rising of water temperature indicates a malfunctioning thermostat. The thermostat is installed on the water inlet pipe of the heat exchanger, serving to maintain a constant water temperature. It continuously monitors the coolant temperature in the engine, keeping the water temperature around 80 to 90 degrees Celsius to ensure the engine operates within the optimal temperature range. The solution for slow water temperature rise is to first check if there are issues with the cooling system, such as blocked louvers, deformed fan blades, or short circuits in the water temperature sensor and its circuit. The thermostat can be removed and inspected by placing it in water at different temperatures to observe its opening behavior. If it fails to open and close properly, the thermostat should be replaced.
20
3
Share

What is the method for adjusting the preload of wheel hub bearings?

The method for adjusting the preload of wheel hub bearings is as follows: 1. After positioning the outer wheel hub bearing correctly, turn the wheel hub while tightening the bearing adjustment nut; 2. Once the wheel hub is firmly fixed, loosen the adjustment nut by one-sixth to one-quarter of a turn; 3. Tighten the lock nut and conduct a test with a pulling force of 200 to 300 N, stopping the tightening of the nut when the wheel hub just begins to rotate; 4. After turning the wheel hub left and right 2 to 3 times, loosen the adjustment nut until the wheel hub can be rotated with a force of 10 to 25 N. The wheel hub bearing is one of the key components of a vehicle, primarily responsible for bearing weight, providing precise guidance for the rotation of the wheel hub, and withstanding axial and radial loads.
9
3
Share

How often should tires be replaced on a new car?

New car tires should be replaced every 3 to 5 years or after driving 60,000 to 80,000 kilometers. The method to determine whether tires need replacement is to check their wear level. Tires should be promptly replaced when the tread depth falls below 1.6mm; when tires have been in use for over 5 years and the sidewalls are covered with cracks; or when a tire has been punctured more than 4 times or the puncture hole diameter exceeds 6mm. The functions of tires are: 1. To support the vehicle load; 2. To reduce and absorb vibrations and impact forces during driving, preventing severe vibrations from damaging car components; 3. To transmit driving force, braking force, and steering force, enabling vehicle operation.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.