What is the fuel consumption of the Chery Fengyun 2?

2 Answers
MacIsabel
07/28/25 8:09pm
Chery Fengyun 2 fuel consumption is 5.8 liters per 100 kilometers. The following is detailed information: Chery Fengyun fuel consumption: According to the comprehensive fuel consumption data from the Ministry of Industry and Information Technology, the comprehensive fuel consumption of the Chery Fengyun 2 hatchback is 5.9L/100km. However, based on actual test data from some Chery Fengyun 2 hatchback owners, its fuel consumption is generally around 7L/100km, and different driving habits can also affect fuel consumption. Factors affecting fuel consumption: In terms of power, the Fengyun 2 is equipped with a 1.5-liter naturally aspirated engine, with a maximum horsepower of 109, a maximum power of 80kw, and a maximum torque of 140Nm. In terms of fuel consumption, according to the comprehensive fuel consumption data from the Ministry of Industry and Information Technology, the comprehensive fuel consumption of the Fengyun 2 is 5.9L/100km. However, based on actual test data from some Fengyun 2 owners, its fuel consumption is generally around L/100km.
Was this review help?
9
3
Share
JordanMarie
08/12/25 12:58am
Over the years of driving the Chery Fengyun 2, I've found its fuel consumption to be quite reasonable. In city traffic, it averages 7-8 liters per 100 kilometers, and on the highway, it can easily achieve around 6 liters. For my daily commute of 20 kilometers, the monthly fuel cost is just over 200 yuan, which is quite economical. The key is to develop good driving habits: avoid sudden acceleration and braking, and don't keep the air conditioning on all the time—these can all help reduce fuel consumption. I've tested it myself; using the air conditioning increases fuel consumption by nearly 1 liter, and low tire pressure also consumes more fuel. So regular maintenance is crucial—changing the oil and cleaning the air filter can keep the car in optimal condition. City traffic is the most challenging; I recommend traveling during off-peak hours to save fuel. Overall, the Fengyun 2's fuel consumption is mid-range among small cars, making it very convenient for daily use.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

Is it normal for the Cadillac CT6 to make a particularly loud noise when starting?

It is normal for the Cadillac CT6 to make a particularly loud noise when starting, which is the sound of the engine warming up at idle. The noise is generally louder during cold starts. Here is more information about the Cadillac CT6: 1. The Cadillac CT6 is equipped with a 2.0T engine and a 3.0T engine, paired with a newly developed 8AT transmission, making it a high-end luxury sedan. 2. The Cadillac CT6 features exterior rearview mirrors with a TFT-LCD display resolution of 1280*240 and utilizes the all-new Omega rear-wheel-drive platform, with 64% of the body frame constructed from aluminum alloy materials.
13
4
Share

Which country is BMW from?

BMW is a German automotive brand under the BMW Group, featuring four model series: i, X, Z, and pure numeric designations, along with series such as 1, 2, 3, and the M series, which are enhanced versions based on these series. The BMW logo stands for Bavarian Motor Works, and its colors and design are derived from the coat of arms of Bavaria, where BMW is headquartered. Taking the BMW X3 as an example, here are its specifications: 1. Body dimensions: Length, width, and height are 4717mm, 1891mm, and 1689mm respectively, with a wheelbase of 2864mm. 2. Powertrain: Equipped with a 2.0T turbocharged engine, with maximum power outputs of 135kw, 165kw, and 185kw, paired with an 8-speed automatic transmission.
19
4
Share

How to resolve Nissan P0776 trouble code?

Nissan P0776 trouble code can be resolved as follows: If the pressure solenoid valve is stuck in the closed position or the solenoid valve itself is faulty, you can remove and clean the solenoid valve. If cleaning doesn't work, replacement is necessary. After troubleshooting any car issue, it's essential to clear the trouble codes. When clearing trouble codes, always follow the specified method for your vehicle model. Never disconnect the negative battery cable solely to clear trouble codes, as this may cause some vehicle control modules to lose historical data. This can result in suboptimal performance for an extended period after repairs or the reappearance of previously cleared trouble codes after some driving.
6
2
Share

How to Check the Oil Dipstick on a Ford Focus?

Ford Focus oil dipstick checking method is as follows: 1. Turn off the car engine and wait for it to cool slightly. 2. Pull out the oil dipstick and wipe it clean with a lint-free cloth. 3. Reinsert the oil dipstick and then pull it out again to check the oil level. 4. If the oil level is below the MIN (minimum) mark, you should add oil immediately. Here is some additional information about the oil dipstick: 1. The function of the oil dipstick is to measure the static height of the oil level, thereby reflecting whether the engine oil volume is within a reasonable range. 2. Regular oil dipsticks will have clear upper and lower limit marks, and you just need to ensure that the detected oil level is between these two marks. 3. More oil is not better; in fact, the higher the oil level, the greater the resistance of the engine.
20
5
Share

Where to Find the Engine Number of Baojun 730?

Baojun 730 engine model is located next to the oil filter. Here is the relevant information: Engine number location: The engine number of Baojun 730 is next to the oil filter. Engine numbers are usually stamped on the engine block, mostly on the front, but sometimes on the sides as well. Baojun 730 body dimensions: The length is 4780mm, the width is 1780mm, the height is 1740mm, the wheelbase is 2750mm, the fuel tank capacity is 52 liters, and the curb weight is 1500kg. Baojun 730 power: It is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 147PS, a maximum power of 108kW, a maximum torque of 250Nm, and is paired with a 6-speed manual transmission.
6
3
Share

What is the ground clearance of the Octavia Combi?

The minimum ground clearance of the Octavia Combi is 115 millimeters. The minimum ground clearance of the Octavia Combi refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance of the Octavia Combi improves its off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The Octavia Combi is a compact car under SAIC Volkswagen Skoda. The dimensions of the Octavia Combi 1.5 version are 4765 mm in length, 1814 mm in width, and 1460 mm in height, with a wheelbase of 2686 mm. The Pro version measures 4753 mm in length, 1732 mm in width, and 1469 mm in height, with a wheelbase of 2730 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Octavia Combi is not static; it also depends on the load condition. Therefore, changes in the vehicle's load should be considered when evaluating ground clearance variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For frequent travel to remote areas or regions with poor road conditions, a higher ground clearance is advisable to improve off-road performance and avoid underbody scrapes or damage.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.