What is the fuel consumption of the Changan CS75?

2 Answers
JaxsonLynn
07/25/25 2:23am
The manual transmission model of the Changan CS75 has a fuel consumption of 7.3 liters per 100 kilometers, while the automatic transmission model consumes 8.4 liters per 100 kilometers. Below is some related information about the Changan CS75: 1. Introduction to the Changan CS75: The Changan CS75 is a compact SUV under the Changan brand, and all models are equipped with a 1.5-liter turbocharged engine. The dimensions of the Changan CS75 are 4650 mm in length, 1850 mm in width, and 1705 mm in height, with a wheelbase of 2700 mm. 2. Improving fuel economy: Maintain tire pressure at the normal level, as low tire pressure increases the car's resistance, thereby increasing fuel consumption. The fuel consumption is reduced by an average of 3.3% when the tire pressure meets the required standards compared to insufficient tire pressure.
Was this review help?
5
4
Share
Gideon
08/10/25 4:34pm
I've been driving my Changan CS75 for over two years now, and the fuel consumption has been quite reasonable overall. In city traffic jams, it can go up to 10 liters per 100 kilometers, while on highway cruising, it drops to around 6.5 liters. The daily average is about 8.5 liters. I often drive my kids to and from school, plus weekend family trips. The spacious interior is a big plus, and the fuel consumption doesn't hold me back. However, fuel efficiency is closely related to driving habits—sudden acceleration or hard braking will increase fuel usage. It's advisable to regularly check tire pressure and maintain it around 2.4 bar. Using higher-quality engine oil during maintenance can make the engine run smoother and save some money on fuel. Overall, as an SUV, the CS75's fuel consumption is above average in its class, making it wallet-friendly for family use.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

Why Do You Need to Press the Clutch When Shifting Gears?

Because shifting gears without pressing the clutch has a high probability of damaging the transmission gears. Here are the relevant explanations: 1. Gear Shifting Basics: Manual transmission vehicles require pressing the clutch when shifting gears because during gear changes, the engine output shaft needs to engage with the next gear's teeth in the transmission. If the engine output shaft is not disconnected from the transmission input shaft during shifting, the transition between the two sets of gears cannot be completed, and the gear lever naturally cannot be moved into the next position. Forcing a gear shift may break the gear lever and damage the gears in the transmission. 2. Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission.
8
2
Share

Why Can't Beginners Handle the Kawasaki H2?

Because the Kawasaki H2's engine horsepower and power output are too high, its speed can increase dramatically in an instant, making it generally unsuitable for beginners. Below is an introduction to the Kawasaki H2 motorcycle: 1. Power Specifications: The Kawasaki H2 is equipped with a 998cc four-stroke inline four-cylinder engine, with an actual displacement of 998cc. It can achieve a maximum horsepower of 210ps and a maximum power output of 154KW. 2. Supercharger Blade: The supercharger blade of the Kawasaki H2 is crafted from a single piece of forged aluminum using 5-axis CNC machining, with a diameter of only 69mm. The impeller consists of six large and six small blades. The base is intentionally designed with fine grooves to facilitate airflow. Under atmospheric pressure, when the air velocity in the intake pipe reaches 100 meters per second, the supercharger blade can deliver 200 liters of air per second, achieving a boosted air pressure of up to 2.4 times after supercharging.
14
3
Share

How to Turn On Continuous Wiper Mode?

Push the lever upward, and the wipers will start operating in continuous mode. Release the lever, and it will automatically return to its original position, stopping the wipers. Automatic intermittent operation. Pull the lever down one notch, and the wipers will start working automatically in intermittent mode. Continuous operation. Pull the lever down another notch, and the wipers will operate continuously at an automatic rate. Continuous high-speed operation. Pull the lever all the way down, and the wipers will operate at high speed.
17
5
Share

What are the differences between the S400 and S450?

The differences between the S400 and S450 are as follows: 1. Exterior: The interior of the new car largely retains the overall design of the previous model, with comprehensive optimizations made to the interior details. The newly designed three-spoke flat-bottom steering wheel adds a sporty touch, while the central LCD screen and instrument cluster adopt a connected design. The 64-color ambient lighting also provides more options for passengers. 2. Powertrain: The 2018 Mercedes-Benz S450L is equipped with a 3.0T V6 twin-turbocharged engine, delivering a maximum power of 270 kW (367 hp) at 5500 rpm and a peak torque of 500 Nm between 1800-4500 rpm. It is paired with a 9-speed automatic transmission. For the chassis, both front and rear suspensions feature a double-wishbone independent suspension setup. Additionally, the S450 model comes with a full-time four-wheel-drive system equipped with a multi-plate clutch-type central differential.
16
5
Share

How to operate the lights when two vehicles meet?

Turn on the high beam. Pull the turn signal switch lever downward to select the high beam. Turn off the high beam (if the high beam is already off, you can skip this step), then turn on the low beam. Turn off the high beam (if the high beam is already off, you can skip this step), then turn on the low beam.
12
5
Share

Does a Dead Car Battery Need to Be Replaced?

If a car battery is dead, it does not need to be replaced immediately. You can first try charging it at a suitable location to see if it can be recharged. If charging is not possible, then replacement is necessary. Generally, car batteries should be replaced every 2-3 years. Below is some relevant information: 1. Composition of the Battery: The battery is an essential part of a car and can be divided into traditional lead-acid batteries and maintenance-free batteries. The structure of a car lead-acid battery mainly consists of positive (negative) plates, separators, electrolyte, case, connecting strips, and terminals. 2. Function: When starting the engine, it provides a strong starting current (around 10A) to the starter motor; when the generator is overloaded, it can assist the generator in supplying power to electrical equipment; when the engine is idling, it supplies power to the electrical equipment.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.