What is the fuel consumption of the Changan CS35plus?

1 Answers
KyleAnn
07/29/25 6:45pm
The fuel consumption of the Changan CS35plus is approximately 6.3L-6.7L. Here is some extended information: Introduction: The Changan CS series is one of the domestic SUVs, holding a significant position in the market, with its product strength and reputation widely recognized over time. Exterior: The large-area black dot-matrix grille greatly enhances visual impact, boosting the vehicle's presence. Interior: The combination of a 10.25-inch full LCD instrument panel and a 10.25-inch central control screen elevates the technological feel inside the car by several levels, perfectly aligning with the aesthetic preferences of young consumers.
Was this review help?
12
5
Share
More Forum Discussions

How to Conduct Annual Inspection for a 7-Year-Old Private Car?

Private cars that have reached 6 years are subject to biennial inspections. If the annual inspection for the 7th year has been conducted in advance, the inspection must still be completed before the expiration of the validity period in the following year. The new regulations for vehicle annual inspections came into effect on November 20, 2020, extending the exemption from inspection to non-operational small and mini passenger vehicles with 7 to 9 seats (excluding vans) within 6 years. Below are precautions for vehicles that have not undergone annual inspection: 1. Accident Liability: For any traffic accidents caused by vehicles that have not undergone the annual inspection on time, the involved party will bear full or primary responsibility, and the insurance company will not be liable. This is because the insurance policy specifies that vehicles with expired inspections are among the objects of claim rejection. 2. Mandatory Scrapping: According to the 'Mandatory Scrapping Standards for Motor Vehicles', vehicles that fail to obtain the inspection compliance mark for three consecutive inspection periods after the expiration of the inspection validity period will be mandatorily scrapped.
17
0
Share

Can You Hold a Child in the Front Passenger Seat?

It is not allowed to hold a child in the front passenger seat. According to the Road Traffic Safety Law, children under the age of 12 are not permitted to sit in the front seats of a motor vehicle. Preschool-aged children should be seated in the rear with a dedicated child seat as required. If a parent holds a child in the front passenger seat of a private car, they may face a fine, although no penalty points will be deducted. Below are the regulations regarding front passenger seat occupancy: 1. Minors: Even minors aged 12 and above should avoid sitting in the front passenger seat and should instead sit in the rear. If necessary, a child seat should be used along with a seat belt, and the child safety locks on the rear doors should be engaged. 2. Pregnant Women: Pregnant women should not sit in the front passenger seat, as the design of the seat belt does not account for pregnancy. In the event of an accident, it may be difficult to ensure the safety of the passenger in the front seat.
11
5
Share

The Process of Online Vehicle Inspection and What to Bring

The online vehicle inspection process includes appearance inspection, lighting and brake inspection, emission inspection, chassis, braking, and lighting inspection, etc. You need to bring a copy of the vehicle's registration certificate, a duplicate of the compulsory traffic insurance policy, the vehicle's green environmental protection label, and the driver's original ID card and driving license. Below is some relevant information about vehicle annual inspection: 1. Annual inspection rules: According to Article 16 of the "Road Traffic Safety Law Implementation Regulations," effective from July 1, 2018, motor vehicles must undergo safety technical inspections within the following periods from the date of registration: passenger vehicles for commercial use must be inspected annually within the first 5 years, and every 6 months after exceeding 5 years. 2. Rules for vehicle annual inspection labels: Starting from June 20, 2020, electronic vehicle inspection label services have been implemented nationwide. Electronic vehicle inspection labels are issued through the unified national internet traffic safety comprehensive service platform.
5
0
Share

Why is the Mercedes Smart not responding when starting?

Mercedes Smart not responding when starting may be due to battery leakage, resulting in insufficient power to start. Additionally, it is recommended to check whether the spark plug ignites and whether there is a fault in the starting circuit. The specific reasons are as follows: Battery is dead. Sometimes you may find that the car cannot start normally in the morning, which is likely because the trunk was not completely closed, causing the trunk light to stay on and drain the battery. Spark plug fails to ignite. The spark plug itself is easily damaged, and short circuits in the high-voltage lines can also cause the spark plug to fail to ignite. Another reason is that poor-quality spark plugs can also lead to failure to start normally. Starting circuit failure. When starting, there is only a slight "click" sound with no further response, which is caused by a stuck starting relay. In this case, simply pressing the tail of the solenoid to force it forward can connect the starting circuit, thereby starting the engine. Solution: Seek professional maintenance from a 4S store to inspect the specific cause.
18
2
Share

What is the displacement of Audi 35?

Audi models with the 35TFSI designation have different displacements. Below are the displacement details for various models: A6 displacement: The 35TFSI engine in the A6 has a displacement of 2.8T with a power output of 162KW. A4 displacement: The 35TFSI engine in the A4 has a displacement of 2.0T with a power output of 155KW. A3 displacement: The 35TFSI engine in the A3 has a displacement of 1.8T with a power output of 118KW. Q7 displacement: The 35TFSI engine in the Q7 has a displacement of 3.0T with a power output of 180KW. Q5 displacement: The 35TFSI engine in the Q5 has a displacement of 2.0T with a power output of 132KW. Q3 displacement: The 35TFSI engine in the Q3 has a displacement of 2.0T with a power output of 125KW.
12
1
Share

How to change from D gear to E gear in Audi A8 driving mode?

Audi driving mode E gear is the economy mode, switching to other driving modes will revert back to D gear. Audi driving modes are divided into: Audi Economy Mode: Provides a low fuel consumption driving method, which is the economic operation mode; Comfort Mode: The transmission shifts gears when the engine speed is low, saving both effort and fuel. Auto Mode: The steering wheel is neither too strenuous to use nor overly sensitive. Dynamic Mode: The engine shifts gears at higher speeds. Individual Mode: Drivers can customize related vehicle system parameters according to their preferences, including engine, transmission, steering, seat belt tightening, and other options. How to switch driving modes in Audi: Currently, Audi's driving mode selection buttons come in two types, one is a dual-button combination, and the other is a single button. For example, models like the B9 and Q7 use dual-button switching, pressing the left or right arrow buttons to toggle between modes; models like the A3 use a single button, where users need to press the button to switch modes back and forth.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.