What is the fuel consumption of the CFMOTO 400NK?

How to set the horn sound when locking the Mazda6?

The method to set the horn sound when locking the Mazda6 is: 1. Set via the in-car central control: Find the "Vehicle Settings" option in the car system, then enter the "Control Page", and turn on the "Lock Sound Prompt" in the control page, the horn will sound when locking; 2. Set via the key: Press the mute button to turn on or off the lock sound prompt. Taking the 2015 Mazda6 manual model as an example: It is a mid-size car launched by FAW Mazda, with a length, width, and height of 4670mm, 1780mm, and 1435mm respectively, a wheelbase of 2675mm, equipped with a 2.0L naturally aspirated engine, a maximum power of 108kw, a maximum torque of 183nm, and matched with a 6-speed manual transmission.

2

4

Share

What are the differences between the Changan Benben Xin Yue Edition and Xin Dong Edition?

Changan Benben Xin Yue Edition and Xin Dong Edition differ mainly in their configurations: The Xin Yue Edition adds practical features such as a rearview camera, GPS navigation, Bluetooth, car phone, voice recognition control system, and car networking. The Xin Dong Edition comes with rear parking sensors, dual 10.25-inch screens, remote start function, LED headlights, and electric adjustment for the exterior rearview mirrors, which can basically meet daily driving needs. Taking the Benben 2018 1.4L Manual Comfort model as an example: It is a microcar launched by Changan Automobile, with dimensions of 3730mm in length, 1650mm in width, and 1530mm in height, and a wheelbase of 2410mm. It is equipped with a 1.4L naturally aspirated engine, delivering a maximum power of 74kW, paired with a 5-speed manual transmission.

9

4

Share

Why can't the trunk suddenly close?

The reasons why the trunk suddenly cannot close are: 1. Foreign objects are stuck in the trunk slot; 2. The trunk lock hook is damaged and deformed; 3. The wire in the flexible rubber tube is broken. Solutions for a trunk that suddenly cannot close: 1. Lubricate and adjust the trunk; 2. Clean the trunk slot; 3. Replace the spring rod with moderate hardness; 4. Check if there is a fault in the trunk control circuit; 5. Replace the trunk hydraulic support rod. Maintenance methods for the trunk: 1. Use a brush to clean dirt when washing, including the edges and trough of the trunk, and perform odor treatment after cleaning; 2. Use separate loading bags to organize items neatly; 3. Lay a trunk mat to prevent dirt or liquids from entering the trunk and eroding the trunk surface, while also preventing items in the trunk from sliding and reducing the possibility of contamination or damage.

4

0

Share

Is it necessary to replace the oil filter?

The oil filter must be replaced. The replacement method is as follows: 1. Preheat the engine; 2. Use a machine to extract the original oil; 3. Remove the old oil filter and replace it with a new one; 4. Add new oil. The oil filter is also known as the oil purifier. Its function is to filter out impurities, gum, and moisture from the oil, delivering clean oil to various lubrication points. The steps to replace the oil filter are: 1. Drain the old oil by placing a waste oil pan and unscrewing the oil drain plug counterclockwise with a wrench to let the old oil drip out; 2. Open the engine oil cap and loosen the oil filter counterclockwise with a filter wrench; 3. Place a sealing ring over the oil outlet and slowly screw the new oil filter into place, tightening it by hand and then using a wrench for an additional 3 to 4 turns; 5. Fill the oil tank with new oil.

20

3

Share

Can non-ETC vehicles use ETC lanes on highways?

Non-ETC vehicles can use ETC lanes during highway toll-free periods. Even regular vehicles without ETC can enter and exit through ETC lanes. ETC (Electronic Toll Collection) is a non-stop electronic toll collection system, also known as an automatic road payment system. It is specifically designed for toll roads and is commonly used on highways, toll bridges or tunnels, and certain urban road sections to alleviate traffic congestion. The installation method for ETC is as follows: 1. Remove the double-sided adhesive plastic film on the back of the ETC device and stick it to the upper part of the windshield behind the rearview mirror; 2. Press firmly for about 10 seconds after sticking; 3. Insert the card into the ETC device and remove it, repeating this operation several times to complete the setup.

12

0

Share

What does it mean when the electronic stability system warning light comes on?

Electronic stability system warning light comes on when the vehicle is in an unstable state. The electronic stability system is a chassis braking technology developed on the basis of the anti-lock braking system, mainly composed of control unit, steering sensor, wheel speed sensor, sideslip sensor, and lateral acceleration sensor. The electronic stability system can achieve automatic vehicle safety control, effectively improving driving stability and safety during dynamic conditions such as braking, acceleration, and steering. The system includes various sensors that comprehensively detect the vehicle's driving state, as well as an intelligent onboard microcomputer control system that analyzes and processes signals from these sensors.

18

3

Share

What is the fuel consumption of the CFMOTO 400NK?

How to set the horn sound when locking the Mazda6?

What are the differences between the Changan Benben Xin Yue Edition and Xin Dong Edition?

Why can't the trunk suddenly close?

Is it necessary to replace the oil filter?

Can non-ETC vehicles use ETC lanes on highways?

What does it mean when the electronic stability system warning light comes on?

What is the relationship between Porsche and Audi?

What is the fuel consumption per 100 kilometers for the Lavida 1.4T?

What is the fuel tank capacity of the Sonata 8 in liters?

What is the fuel tank capacity of the Jetta VS7 in liters?