What is the fuel consumption of the CFMOTO 250?

1 Answers
EmilianoLee
07/29/25 3:19pm
Under aggressive driving or in urban areas, the fuel consumption ranges between 3.2-3.6L, which is typical for domestic 250cc displacement motorcycles. About the CFMOTO 250nk: It features a single-cylinder water-cooled engine with a maximum power output of 19.5KW, inverted front forks, independent rear suspension, and excellent tire grip, making it suitable for off-road use. Meaning of 250cc: cc is used to describe the displacement of motorcycles, where 1000cc=1L, 250cc=0.25L, and a 250cc motorcycle is equivalent to a 0.25L displacement car. Use imported semi-synthetic or higher-grade engine oil; If using semi-synthetic oil, it is recommended to change it every 3000 kilometers. It is best to use 93-octane gasoline and avoid running the tank completely dry before refueling, as this can damage the engine.
Was this review help?
4
4
Share
More Forum Discussions

What is the difference between 20w and 15w engine oil?

20w and 15w engine oils differ in the following aspects: 1. Different properties: For the 20w50 specification, the 20 indicates the minimum applicable temperature of the oil is -15 degrees Celsius, while the 15 in 15w-40 indicates the minimum applicable temperature is -10 degrees Celsius. 2. Different viscosity: 20w50 oil is a multi-grade viscosity oil, whereas 15w-40 is not. 3. Different values: The W in the designation stands for Winter, and the preceding number indicates the oil's low-temperature fluidity—the smaller the number, the better the low-temperature fluidity. The number following the W represents the oil's viscosity grade at 100°C—the larger this number, the better the protection the oil provides to the engine at high temperatures.
17
0
Share

How to Turn Off the Rear Wiper on a Ford Vehicle?

Ford vehicle rear wiper turning off method: For hatchback models, the wiper switch is located on the wiper control stalk on the right side of the steering wheel. You can turn off the rear wiper by moving the stalk forward or backward while controlling the front wipers by moving it up or down. Additional information about wipers is as follows: 1. The rear wiper is the wiper for the rear windshield, commonly equipped on SUVs, MPVs, hatchbacks, and some liftback vehicles. 2. The impact of high-speed airflow must be considered before installing a rear wiper. 3. Wipers are important accessories installed on the windshield, designed to clear rain, snow, and dust that obstruct visibility. Thus, wipers play a crucial role in driving safety.
7
3
Share

What is Exhaust Fluid?

Exhaust fluid is a liquid used to reduce nitrogen oxide pollution in diesel vehicle emissions. Below is an introduction to related automotive exhaust content: 1. Regulatory Standards: Automotive exhaust emission standards are quality requirements established to reduce harmful gas production, encouraging automobile manufacturers to improve technologies regarding emitted pollutants such as carbon monoxide, hydrocarbons, nitrogen oxides, and particulate matter. Both Europe and the United States have formulated relevant standards, while Mainland China primarily adopts European standards. 2. Air Pollution: Vehicle exhaust is another major factor in air pollution, containing carbon monoxide, nitrogen oxides, and other solid particles that adversely affect human health—especially leaded gasoline, which poses greater harm. Different vehicles also emit distinct odors. Automotive repair experts note that normal exhaust should be colorless and odorless, whereas varied colors or unusual smells in vehicle emissions may indicate potential malfunctions.
12
3
Share

How to Fix the Issue of the Mondeo Rear Door Not Opening from Inside?

The reason why the Mondeo rear door cannot be opened from inside is because the child lock mechanism has been activated. Below is an introduction to the child lock mechanism: 1. There is a small hole on the side of the Mondeo door, marked with a child lock symbol, inside which there is a white knob; 2. Insert the key and rotate it to set the lock. This can be done on both sides, and once set, the door cannot be opened from inside. Here is additional information about car child locks: 1. The car child lock is a feature designed to prevent children from accidentally opening the car door, thereby avoiding potential harm to them; 2. There are two common types of child safety lock switches: one is a rotary knob type, and the other is a toggle switch type.
20
1
Share

What to Do When a Vehicle Stalls Due to Water Ingress?

Here are the steps to handle a vehicle stalling due to water ingress: 1. Push the car to a higher ground, then call the insurance company or a repair shop for towing, and proceed to the repair shop for inspection and repairs. 2. Be sure not to attempt to start the engine, as doing so constitutes deliberate damage by the driver, and the insurance company may refuse compensation. Below are the reasons for a car stalling due to water ingress: 1. At low engine speeds, the exhaust pipe is submerged in water, causing excessive exhaust pressure that extinguishes the engine. 2. The air filter gets wet, leading to insufficient air intake and stalling (water has not yet entered the intake manifold). 3. A small or large amount of water enters the engine, preventing it from functioning properly and causing damage and stalling.
2
5
Share

What are the penalties for not wearing a seat belt properly?

The penalty for not wearing a seat belt properly is a deduction of two points. Here is an introduction to seat belt-related content: 1. Function: The role of the seat belt is to restrain movement and provide cushioning, absorbing impact energy, dissipating inertial forces, and preventing or reducing the degree of injury to drivers and passengers. Car accident investigations show that wearing a seat belt can reduce fatalities by 57% in frontal collisions, 44% in side collisions, and 80% in rollovers. 2. Principle: When a strong collision occurs at the front of the car, due to inertia, the driver and passengers' bodies move forward rapidly. At this time, the seat belt will do its best to 'pull back' the bodies of the driver and passengers, absorbing part of the impact energy, while the airbag inflates and fully deploys.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.