What is the fuel consumption of the Cadillac XTS?

1 Answers
VonArianna
07/24/25 7:01am
The official fuel consumption of the Cadillac XTS is 9L/100km, while the actual fuel consumption is 10-11L/100km. Here are some methods to reduce fuel consumption: Avoid prolonged engine idling: When the vehicle is idling, the fuel consumption is much higher than during normal driving. Therefore, if the vehicle is not moving for a long time, such as when waiting for someone, it is best to turn off the engine. During cold starts, the warm-up time should not exceed 1 minute; maintaining a few minutes of low-speed driving is sufficient. Maintain good driving habits: A gentle and smooth driving style is the most fuel-efficient. During the initial acceleration phase, avoid pressing the accelerator pedal too hard. The correct method is to accelerate smoothly and maintain a constant speed once a certain speed is reached. When driving in congested areas, always be aware of the road conditions ahead to avoid sudden braking.
Was this review help?
8
0
Share
More Forum Discussions

How many colors are available for the Changan CS75?

The Changan CS75 comes in 5 colors: Moonlight White, Noble Black, Titanium Gray, Crystal Silver Gray, and Scarlet Red. Taking the 2021 Changan CS75 as an example, it is a compact SUV with body dimensions of 4650mm in length, 1850mm in width, and 1715mm in height, a wheelbase of 2700mm, a fuel tank capacity of 58 liters, and a trunk capacity of 520 liters. The 2021 Changan CS75 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 178PS, a maximum power of 131kW, and a maximum torque of 265Nm, paired with a 6-speed manual transmission.
1
0
Share

What does car hot start mean?

Car hot start refers to restarting the engine after it has been turned off, while the engine temperature is still within the normal operating range, and the oil on the engine's friction surfaces has not yet drained away, with the oil film still present. The precautions for car hot start are: 1. Conduct a thorough inspection before hot starting, including checks on window glass, body assembly, tires, and the trunk; 2. Regularly clean the battery and replenish the battery electrolyte. The reasons for difficulty in car hot start are: 1. High engine temperature, where residual heat continues to warm the fuel lines, increasing fuel pressure in the fuel pipes; 2. Fuel system pressure loss, causing severe gasoline evaporation; 3. Carbon buildup in the throttle or low battery voltage.
18
4
Share

Why does the car lose power and fail to start immediately after ignition?

Car loses power and fails to start immediately after ignition due to the following reasons: Dead battery: The car cannot start normally, most likely because the electrical appliances in the car were not completely turned off, which drained the car battery and caused the failure to start. Spark plug fails to ignite: The spark plug itself is prone to damage, and short circuits in high-voltage lines can cause the spark plug to fail to ignite. Another reason is that poor-quality spark plugs can also lead to failure to start normally. Starting circuit malfunction: During startup, there is only a slight sound and no further response, which is caused by a stuck starting relay.
1
4
Share

What is the Principle of Auto Hold?

The principle of auto hold is: The controller provides accurate parking force through the slope sensor. During startup, the parking control unit calculates information provided by the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the car to start smoothly. Steps to use auto hold: 1. Press the car's brake pedal; 2. Press the car's one-touch start button; 3. The car's dashboard lights up, and the entire vehicle's power is connected; 4. Press the autohold button located inside the car to activate the auto hold mode.
3
4
Share

What is the maintenance interval for a car?

The maintenance interval for a car is every 5,000 kilometers or one year, whichever comes first. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. The purpose of car maintenance is to keep the car clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life. The effects of not performing maintenance on a car include: 1. A dirty air filter can hinder fresh air from entering the cylinder, leading to an overly rich mixture, incomplete combustion, reduced power, and excessive exhaust emissions; 2. A clogged oil filter can impede the flow of lubricating oil, causing poor engine lubrication, increased wear, and even bearing seizure.
9
5
Share

What Causes Poor Acceleration, Jerking Sensation, and High Fuel Consumption in Cars?

Car acceleration is weak, with a jerking sensation and high fuel consumption for the following reasons: Carbon buildup in the car: Carbon deposits include cylinder carbon buildup, throttle carbon buildup, spark plug carbon buildup, intake carbon buildup, etc. These areas are directly related to the engine's power output. When there is excessive carbon buildup inside the engine, the car's ignition energy decreases, intake efficiency drops, ultimately leading to reduced engine power and symptoms like shaking and poor acceleration. Fuel system malfunction: Using an incompatible fuel grade can cause the car's output power to drop and reduce its performance. Alternatively, if the fuel tank vent is blocked, it may fail to meet the required fuel supply, resulting in an overly lean air-fuel mixture and weak engine acceleration.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.