What is the fuel consumption of the Cadillac XT5?

1 Answers
SanCooper
07/29/25 8:07pm
There are 6 available models of the Cadillac XT5, among which the Cadillac XT5-2022-2.0T Four-wheel Drive Fashion, Premium, Luxury, and Platinum models, equipped with a 237 horsepower engine, have an NEDC fuel consumption of 8.3L per 100 km. The Cadillac XT5-2022-2.0T Two-wheel Drive Luxury and Fashion models, also equipped with a 237 horsepower engine, have an NEDC fuel consumption of 8L per 100 km. The fuel tank capacity varies among different models of the Cadillac XT5, and the distance that can be covered with a full tank of fuel is as follows: Models equipped with a 237 horsepower engine have a fuel tank capacity of 82L, and the distance that can be covered with a full tank is 82/8.3*100=988 km. Models equipped with a 237 horsepower engine have a fuel tank capacity of 73L, and the distance that can be covered with a full tank is 73/8*100=913 km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption.
Was this review help?
1
4
Share
More Forum Discussions

Does the XPeng P7 have an ignition off button?

XPeng P7 does not have an ignition off button. Below are the specific details of the XPeng P7: 1. Vehicle Positioning: The P7 is a pure electric mid-size car with a wheelbase of 2998mm, and its length, width, and height are 4880mm, 1896mm, and 1450mm respectively. 2. Power System: The P7 comes in rear-wheel-drive and all-wheel-drive versions. The rear-wheel-drive version is a single-motor model, while the all-wheel-drive version is a dual-motor model. The single-motor model has a maximum power of 196kW and a maximum torque of 390 Nm. The dual-motor model has a combined power of 316kW and a combined torque of 655 Nm. 3. Suspension Type: The P7 uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
6
4
Share

Where is the engine number located on the Trumpchi GS4?

The engine number of the Trumpchi GS4 is located at the connection point between the engine block and the transmission. It typically consists of a combination of 7 to 8 digits and letters. In addition to the method mentioned above, the engine number can also be found through the following four ways: The vehicle's driving license displays the engine number, usually on the second-to-last line; The motor vehicle registration certificate records the engine number; The purchase invoice includes the engine number; The vehicle purchase tax payment certificate states the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's lineup, and multiple engines can share the same model. The engine number, however, is the production serial number of the engine. Each engine has a unique number, and no two engines share the same engine number.
12
4
Share

Is it easy to have a flat tire if the side of the tire is gnawed?

Tire blowouts can occur if the side of the tire is gnawed. Here is an introduction about tires: 1. Tires are round, elastic rubber products assembled on various vehicles or machinery for ground rolling. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance. 2. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperature effects during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. 3. At the same time, they are also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Half of the world's rubber consumption is used in tire production, highlighting the significant rubber consumption by tires. 4. When purchasing new tires, ensure that the new tire's size, load range, speed rating, and construction type are the same as the original tires.
13
2
Share

What are the causes of transmission failure in the hybrid Accord?

Here are the reasons for transmission failure in the hybrid Accord: 1. Failure of the transmission computer or electronic components. 2. Transmission oil contains impurities or is severely insufficient. 3. Damage to internal parts of the transmission. Here is some extended information about new energy vehicles: 1. New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources, or use conventional vehicle fuels with new types of on-board power devices, integrating advanced technologies in vehicle power control and driving to form vehicles with advanced technical principles. 2. New energy vehicles include pure electric vehicles, extended-range electric vehicles, hybrid vehicles, fuel cell electric vehicles, hydrogen engine vehicles, and other new energy vehicles. 3. Special license plates for new energy vehicles are green with black characters and black borders. New energy vehicle license plates are gradient green, while large new energy vehicle license plates are yellow and green two-tone.
16
2
Share

What is the difference between Audi's permanent all-wheel drive and regular four-wheel drive?

Here are the specific differences between Audi's permanent all-wheel drive and regular four-wheel drive: 1. Operation: The permanent all-wheel drive system uses a central differential between the front and rear axles to absorb the speed difference between the front and rear wheels, balancing power distribution between the axles, ensuring the vehicle is always in four-wheel drive mode. Regular four-wheel drive systems require manual switching by the driver, using a transfer case to rigidly connect or disconnect the front and rear axles to engage four-wheel drive. 2. Performance: The permanent all-wheel drive system offers a superior driving experience, stable cornering, and strong off-road capabilities. Regular four-wheel drive systems provide a poorer driving experience, unstable cornering, and weaker off-road performance. 3. Manufacturing cost: The permanent all-wheel drive system has a complex structure, resulting in higher manufacturing costs. Regular four-wheel drive systems have a simpler structure, leading to lower manufacturing costs.
16
0
Share

What is the brake-pads-worn warning light?

brake-pads-worn is the warning light for brake pad wear. Mileage: Under normal driving conditions, the front brake pads should be replaced approximately every 30,000 to 50,000 kilometers, and the rear brake pads every 60,000 to 100,000 kilometers. Once severe brake pad wear is detected, they should be replaced promptly. Degree of wear: Typically, new brake pads are about 1.5 centimeters thick. If they wear down to one-third of their original thickness, or less than 5 millimeters, it is recommended to replace them immediately. If a metallic scraping sound is heard during braking, this may indicate that the brake pads have worn down to their minimum thickness, causing the wear indicators to contact the brake disc and produce noise—prompt replacement is necessary. If the brake pedal feels lighter than usual, or if braking becomes difficult or ineffective, this suggests severe brake pad wear and insufficient thickness, requiring immediate replacement.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.