What is the fuel consumption of the Cadillac SRX?

1 Answers
EvelynDella
07/30/25 5:13am
The fuel consumption of the Cadillac SRX is 11 liters per 100 kilometers. Below is an introduction to the Cadillac SRX: Introduction: The Cadillac SRX luxury multi-purpose vehicle made its debut at the North American International Auto Show in Detroit in 2003. This new model in the Cadillac series is a luxury mid-size multi-purpose vehicle that can adapt to almost any road condition, with a towing capacity of up to 1,590 kilograms, and a driving feel akin to a sports sedan. Model Origin: The Cadillac SRX is a full-time four-wheel-drive luxury SUV. Its bold and innovative exterior design brings a disruptive influence to the SUV model style, which is notably homogenized. The extremely bold lines and the slender, imposing appearance make the SRX stand out as unique among many models with softer contours.
Was this review help?
19
5
Share
More Forum Discussions

At what temperature does the Volkswagen Tiguan's cooling fan activate?

Generally, the engine radiator cooling fan activates around 90°C. More relevant details are as follows: 1. After the car engine operates for a certain period: The radiator fan automatically turns on when the engine's coolant temperature rises to prevent overheating. Additionally, the fan also activates during hot weather when the air conditioning is in use. The cooling fan shuts off again when the coolant temperature drops to a certain level. Modern vehicle cooling fans are mostly electric. 2. When the coolant temperature reaches approximately 90 degrees: The fan operates at low speed. 3. When the coolant temperature reaches about 105 degrees: The fan starts running at high speed. Of course, different vehicle models may have varying temperature settings for fan operation. Therefore, it's best to use antifreeze coolant in your vehicle, as its boiling point exceeds 100 degrees before it boils.
9
5
Share

What Are the Causes of Abnormal Noise During Low-Speed Turning?

The causes of abnormal noise during low-speed turning are: 1. Slippage of the steering pump drive belt, resulting in insufficient friction; 2. Friction between the engine guard plate and the chassis; 3. Foreign objects between the brake disc and brake pads; 4. Contaminated steering fluid; 5. Clogged steering filter; 6. Air in the steering hydraulic system; 7. Loose screws on the engine guard plate. The solutions for abnormal noise during low-speed turning are: 1. Replace the steering pump drive belt; 2. Adjust the engine guard plate and chassis; 3. Clean the brake disc and brake pads; 4. Replace the steering fluid; 5. Clean the steering filter; 6. Bleed air from the steering hydraulic system.
20
0
Share

Why is there a strong smell of engine oil in the car?

The reasons for smelling a strong odor of engine oil in the car are: 1. Oil leakage from the valve cover, dripping onto the hot exhaust pipe, with the air conditioning set to external circulation, leading to the smell of engine oil; 2. Engine oil from the oil pan splashing onto the exhaust pipe, it is recommended to stop and inspect; 3. Insufficient coolant causing the engine temperature to be too high. The main functions of engine oil are to reduce friction and wear of moving parts, and to remove sludge and varnish from the engine. It also neutralizes acids produced from fuel and lubricant oxidation, improves the sealing of piston rings, and cools the engine by carrying away heat from moving parts. Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in base oil, mainly containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers.
13
2
Share

How Often Should the Car's Fuel Filter Be Replaced?

The car's fuel filter should be replaced approximately every 20,000 to 40,000 kilometers. The method for replacing the fuel filter is as follows: 1. Remove the battery navigation wires and take off the rear seat; 2. Pry open the wires at the triangle symbol area and wipe them clean with a cloth; 3. Use pliers to clamp the fuel pipe clamp and move it backward, then shake it left and right to remove one of the fuel pipes; 4. Press the square buttons on both sides of the fuel pipe and pull it out, then use a screwdriver to remove the disc screws; 5. Take out the old fuel filter to proceed with the replacement. The fuel filter is used to filter moisture and impurities in the gasoline, preventing water and impurities from entering the fuel injector and cylinders.
6
0
Share

What is VOYAH Auto?

VOYAH Auto is a premium intelligent electric vehicle brand, established in 2018 and affiliated with the Fortune 500 company Dongfeng Motor Corporation. Below is relevant information about VOYAH Auto: 1. Developed the ESSA Native Intelligent Electric Architecture: The ESSA Native Intelligent Electric Architecture provides users with a new experience in three major aspects: multi-scenario power solutions, sustainable iterative smart technology, and all-scenario safety. It offers various power forms including pure electric and range-extended electric, delivering a pure electric driving experience. Equipped with an advanced intelligent connectivity architecture, it utilizes cutting-edge 5G technology and a high-performance central computing platform to meet the functional requirements of intelligent interaction and autonomous driving in multiple scenarios. 2. The brand's first mass-produced concept car is the iFree: The overall design of the iFree is consistent with the first concept car iLand, maintaining a highly unified style.
14
4
Share

Does a Leaking Shock Absorber Need to Be Replaced?

A leaking shock absorber needs to be replaced. The replacement method is as follows: 1. Park the vehicle on a level surface; 2. Secure the vehicle with jack stands, loosen the lug nuts on both sides of the front or rear end, and remove the wheels; 3. Spray the old shock absorber with a metal cleaner; 4. Remove the bolts from the shock tower and disconnect the suspension impact; 5. Remove the bolts at the bottom and top and take out the shock absorber for replacement. The shock absorber is used to dampen the oscillation when the spring rebounds after absorbing shocks and to mitigate impacts from the road surface, thereby accelerating the attenuation of vibrations in the frame and body to improve the vehicle's ride comfort. Based on material, shock absorbers can be classified into hydraulic and pneumatic types.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.