What is the fuel consumption of the Cadillac ATS-L?

1 Answers
VonWalker
07/29/25 11:09pm
The official combined fuel consumption of the Cadillac ATS-L is 7.8L/100km. Below are the methods to check fuel consumption and factors affecting it: Methods to check fuel consumption: The fuel gauge on the engine displays the fuel level, indicating and monitoring the fuel reserve and consumption in the tank. 'F' stands for full, and 'E' stands for empty. When the fuel warning light comes on, record the mileage. After refueling, when the fuel runs out again, record the mileage once more. Calculate the actual distance traveled between the two mileage readings and divide it by the amount of fuel consumed to determine the fuel consumption. Factors affecting fuel consumption: Incorrect driving can increase fuel consumption by 2 to 3 times. Poor driving habits have the most significant impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues. Rough roads, traffic congestion, or uneven surfaces force the vehicle to operate in lower gears for extended periods, inevitably increasing fuel consumption.
Was this review help?
8
4
Share
More Forum Discussions

How to eliminate the warning light on the car?

Generally, when the car's warning light comes on, it cannot be manually eliminated. Usually, you need to go to a 4S shop to use a fault detector for troubleshooting before it can be eliminated. Generally speaking, there are two situations when the engine warning light comes on: 1. A yellow symbol light indicates that the engine has a fault, but this fault does not affect the normal operation of the engine. However, it must be inspected and repaired; 2. A red symbol light indicates that the engine has a serious fault. Under normal circumstances, it needs to be reported for repair immediately. If you are in a special road condition, you can drive in an emergency, but you need to pay attention to the working state of the engine at all times. If the water temperature is too high or the oil pressure warning light comes on, and you clearly feel that the vehicle has a fault, you should pull over immediately and call the repair station for rescue to avoid affecting the performance of the engine. The vehicle warning light is mostly caused by the fuel emission system. When the warning light is on, start and turn off the vehicle three times, then start the vehicle again to observe whether the warning light is still on. If it is still on, you need to go to the shop in time to check the fault code to determine whether it is an engine problem or a sensor fault.
8
5
Share

How Long is the Interval Between Subject 2 and Subject 3?

Subject 2 and Subject 3 exams have an interval of 30 days. Here is some information about obtaining a driver's license: 1. Starting from passing Subject 1, you can apply for Subject 2 after 10 working days; 2. Starting from passing Subject 2, you can apply for Subject 3 (road test) after 30 days; 3. Within 15 days after passing the Subject 3 road test, you must apply for the Subject 3 theory test. Additional content: The Subject 3 exam includes: 1. Completing test items while driving a motor vehicle on the road; 2. Compliance with traffic laws and regulations; 3. Comprehensive control of the motor vehicle; 4. Proper use of lights, horns, seat belts, and other devices; 5. Correct observation and judgment of road traffic conditions; 6. Safe driving behavior and awareness of civilized driving.
16
4
Share

Is a 3-month-old car considered a stock vehicle?

A 3-month-old car is considered a stock vehicle. The so-called "stock vehicle" generally refers to a car that has been manufactured and left the factory for more than 3 months but still hasn't been sold. Since the automobile manufacturing industry places great emphasis on timeliness, under normal circumstances, the process from manufacturing to selling a new car to the buyer is usually completed within one or two months. It is rare for this process to exceed 3 months or half a year. If dealers can properly handle stock vehicles, such as periodically starting the vehicle, regularly cleaning the stock car, charging the battery at regular intervals, and moving the vehicle frequently, then even vehicles stocked for more than a year can maintain good condition. Such cars can also be considered for purchase. Precautions for purchasing stock vehicles: Check the vehicle's manufacturing nameplate: Before inspecting other areas, first check the manufacturing nameplate of the car (usually located on the inner side of the driver's door or in the engine compartment). Inspect the paint and rubber seals: If the stock vehicle is dirty, you can request the 4S store to clean it before inspection, as small scratches on the body will be more visible after cleaning. Most minor scratches come from abrasions during transportation. Then, inspect the rubber seals on the doors and the rubber strips on the windshield wipers, as rubber is prone to aging. Check the chassis: The inspection of the vehicle's chassis is often overlooked. Bend down to observe whether the shock absorbers have oil leakage, whether the exhaust pipe and muffler have severe rust, and also carefully inspect lower components such as the lower control arms and oil pan for any signs of collision or bottoming out. This is because during the process of dispatching new cars, 4S stores may accidentally damage the vehicle's chassis due to operational issues.
4
4
Share

What are the general maintenance items?

General maintenance items include: 1. Oil and oil filter replacement; 2. Air filter replacement; 3. Fuel filter replacement; 4. Transmission fluid replacement; 5. Tire maintenance. Additional information: 1. Maintenance is based on routine maintenance, which involves replacing the air filter and fuel filter in addition to the oil and oil filter. 2. Major maintenance can alternate with routine maintenance, with intervals varying by car brand, as recommended by the manufacturer. 3. Engine oil is the lubricant for the engine. To ensure vehicle performance, it should be replaced periodically, with the replacement cycle depending on the oil's effective lifespan. 4. During operation, the engine draws in a large amount of air, and the dust in it can accelerate wear on the piston group and cylinder. The air filter's role is to remove dust and particles from the air, ensuring sufficient and clean air enters the cylinder.
4
5
Share

How to Turn on the Air Conditioning When the Outside of the Glass Fogs Up in Summer?

When the outside of the glass fogs up in summer, the defogging method is: Turn on the internal and external air circulation to allow sufficient airflow, which speeds up the evaporation of the fog and quickly removes the water vapor on the glass. In summer, when the air conditioning is turned on inside the car, the outside temperature is lower than the inside temperature, causing the water vapor inside the car to form small water droplets on the front windshield, which is the reason for the fog on the glass. Below is an introduction on how to solve the issue of fogging when using the air conditioning in summer: 1. In summer, car window fogging mostly occurs on the two side windows and the lower edge of the front windshield. The side window situation is relatively mild, but the water vapor on the front windshield will gradually increase over time, eventually affecting driving visibility, and the water vapor inside the car cannot be wiped off. 2. Using the air conditioning system to remove glass fogging is applicable in both winter and summer. In winter, turning on the cold air conditioning can remove water vapor from the glass. In summer, the method to defog is to turn on the internal and external air circulation to allow sufficient airflow, speeding up the evaporation of the fog and quickly removing water vapor from the glass. 3. You can apply soapy water to the inside and outside of the front window and use the wipers to wipe it once or twice. The soapy water inside the front window can be gently wiped with a tissue until it is semi-dry. After the soapy water completely dries, the front window glass will not fog up, and this effect can generally last for about a week.
12
3
Share

What does the faucet symbol on a car mean?

The faucet symbol on the dashboard refers to the engine fault light, which indicates that there is a problem with the engine. The manifestations of engine faults are as follows: 1. It leads to a decline in the quality of vehicle exhaust, causing serious environmental pollution. 2. It increases fuel consumption. 3. The engine temperature rises, accelerating engine wear. 4. Severe engine oil burning occurs. 5. Engine noise increases, affecting ride comfort. Here is additional information about the engine fault light: (1) If the engine fault light comes on while driving, it is likely due to poor combustion conditions in the engine, such as engine knocking or carbon buildup. This could be caused by the use of low-quality fuel or internal engine dirt, leading to the illumination of the engine fault light. (2) Once the engine fault light is on, it will not disappear automatically. The engine fault signal light is emitted by the ECU, which controls all the electronic components of the engine. If the engine malfunctions, components like the electronic throttle, fuel injector, alternator, and fuel pump can be affected, resulting in abnormal engine operation.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.