What is the fuel consumption of the BYD Song Plus 2021 model?

2 Answers
Bailey
07/24/25 8:04am
Under normal driving conditions without traffic congestion, the fuel consumption is around 5-6L. Since it's convenient to charge in the city, not much fuel is needed; if charging is not possible, the fuel consumption should be around 9-10 liters. Influencing factors: The relationship between vehicle weight and fuel consumption is directly proportional. It is said that for every 10% reduction in vehicle weight, fuel consumption will correspondingly decrease by several percentage points; lower body drag coefficient significantly reduces fuel consumption, and the relationship between these two is also directly proportional. Precautions: Ensure tires are properly inflated in a timely manner; regularly visit maintenance stations to clean carbon deposits; replace spark plugs periodically, as prolonged use of spark plugs can lead to increased fuel consumption.
Was this review help?
9
1
Share
DiElias
08/11/25 3:45am
I've been driving the BYD Song PLUS 2021 model for over a year, mainly for daily commuting, with an average fuel consumption of around 6 liters per 100 kilometers. In city traffic jams, it can go slightly higher, up to over 7 liters, but on highways, it can drop to about 5 liters. Driving habits really make a big difference—for example, not pressing the accelerator too hard and using cruise control more often can save a lot of fuel. Filling up a tank easily gets me 700 to 800 kilometers, and compared to pure gasoline cars, I save at least 200 to 300 yuan per month on fuel. This car is a hybrid version, and the system is quite smartly designed, with the battery helping to absorb energy recovery. For maintenance, it's recommended to check tire pressure every six months, as low tire pressure can lead to higher fuel consumption. Overall, the fuel efficiency is satisfying and saves me money.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

What to Do About Severe Oil Burning in Magotan?

Use engine oil that meets the vehicle's technical specifications and avoid frequent sudden acceleration and prolonged high-speed driving. There are three methods to reduce fuel consumption in vehicles: 1. Minimize Vehicle Weight: Keep the interior as simple as possible and avoid carrying unnecessary items. Every additional kilogram of load increases fuel consumption by 1%. 2. Avoid Excessive Vehicle Modifications: Adding spoilers, protective covers, or rear wings can disrupt the original aerodynamic design, increasing wind resistance and consuming extra fuel. Modifying lighting systems can increase electrical load, leading to unnecessary fuel consumption. 3. Develop Good Driving Habits: Avoid sudden acceleration, driving at high speeds in low gears, prolonged idling, frequent lane changes, or braking. Aim for smooth starts, steady-speed driving, and reduced braking.
5
1
Share

Is the BMW M5 domestically produced or imported?

BMW M5 is imported. The BMW M5 (BMW-M5) is a high-performance sports car manufactured by the German automaker BMW. It is a high-performance variant derived from the 5 Series, developed and produced by BMW's dedicated motorsport division, BMW M. BMW 5 Series: The BMW 5 Series is available in two versions: domestically produced by BMW Brilliance and imported BMW models. The domestically produced BMW 5 Series offers additional features compared to the imported models, such as car networking, adaptive high beams, steering wheel memory, etc., providing relatively higher cost-effectiveness. On the other hand, the imported BMW 5 Series offers more exterior and interior color options than the domestic version. Power Specifications: The gasoline engine delivers a maximum power output ranging between 580 horsepower/427 kilowatts and 600 horsepower/441 kilowatts, likely equipped with a twin-scroll turbocharger. However, a diesel engine version will not be available for this model.
15
5
Share

Which company produces Lynk & Co cars?

Lynk & Co is an automotive brand jointly established by Geely and Volvo in 2016. Introduction to the Lynk & Co 02: 1. Its dimensions are 4448mm in length, 1890mm in width, and 1528mm in height, with a wheelbase of 2702mm. 2. It continues the family-style front face design of Lynk & Co, featuring split-type headlights, a polygonal front contour, and a horizontal grille, giving the vehicle high recognition. 3. Powertrain: It offers 2 displacement options, 1.5T and 2.0T, with 3 transmission choices including dual-clutch, manual, and automatic. The engine delivers a maximum power of 140kW, maximum horsepower of 190PS, and maximum torque of 300Nm.
16
3
Share

How to Clean the Car Roof Liner?

Cleaning steps for the car roof liner are as follows: 1. Remove dust. First, recline the seats and cover them with a towel or seat cover. Then use high-power vacuum cleaners and brushes to extensively clean the roof liner, removing surface dust and dirt that easily falls off; 2. Clean stains. Most vehicles have a sponge liner, which contains a layer of sponge inside. For this type of liner, you can purchase a specialized roof liner cleaner. Generally, dry foam cleaners are the best choice and can be bought online; 3. Inspection. Carefully inspect the corners of the roof liner. If necessary, repeatedly spray foam and scrub. Finally, use a clean cotton cloth to smooth along the direction of the liner's nap, restoring it to its original state.
9
5
Share

How to flatten the rear seats of a Mercedes-Benz GLC?

Open the car door and locate the release handle on the backrest, which is positioned at the shoulder area of the seat. Each rear seat position has its own release handle, allowing you to easily choose which seat to fold down. When flattening the seat, make sure to push it forward. You will then notice that the space has become sufficiently large. Different models may have different methods. Another approach is to pull the two straps located on the rear seats, which will release and fold the seat down. Under the rear trunk seats, there are black straps. Pull them backward, then lift the seat upward and hook it onto the headrest of the front seats. The straps can be adjusted for tightness. If you are adjusting the rear seats for the first time, you can refer to the car's manual for accurate operation steps related to this process.
5
5
Share

What does the Nissan Tiida P1715 trouble code mean?

Nissan Tiida P1715 trouble code indicates an engine input belt speed malfunction. The following are the specific causes of this fault: Specific causes: First, it is necessary to determine whether the issue is caused by electrical problems, such as loose or disconnected plugs, or possibly due to a damaged vehicle computer. Such faults are often related to electrical circuits. The causes of this trouble code may include transmission fluid level being too low, transmission fluid being too dirty, mechanical failure of the shift solenoid valve, circuit issues, connectors, or faults in the Transmission Control Module (TCM). Clearing the trouble code: After addressing the vehicle fault, the trouble code must be cleared. When clearing the trouble code, it is essential to follow the specified method for the particular vehicle model. It is crucial not to simply disconnect the battery negative ground cable to clear the trouble code. Otherwise, it may result in the loss of 'historical records' in the control computer of some vehicle models.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.