What is the fuel consumption of the BYD Qin hybrid version?

What to do if you run a red light with a temporary license plate?

The penalties for running a red light with a temporary license plate are as follows: 1. Running a red light results in a fine of 200 yuan and 6 demerit points. 2. Failure to install the license plate as required (temporary license plates should be affixed both front and rear) may result in a fine of 200 yuan and 12 demerit points. 3. The paper motor vehicle license plate that permits temporary road use is also known as a temporary vehicle license plate. It refers to the temporary vehicle driving certificate issued by the public security vehicle management department for newly purchased vehicles before official registration. The validity period of a temporary license plate generally does not exceed thirty days. If it is a temporary license plate with a "sky blue background, black characters, and black borders," it is only for motor vehicles driving within the city limits; if it is a temporary license plate with a "brown-yellow background, black characters, and black borders," it is for motor vehicles driving across cities. The premise for deducting points with a temporary license plate is that the temporary license plate is obtained through official channels and linked to the owner's phone. If the temporary license plate does not correspond to the vehicle, running a red light cannot be recorded. The temporary license plate must be affixed as required; otherwise, the camera cannot record it. The red light intersection must have a camera that captures the moment of running the red light, or the driver must be stopped by traffic police for running the red light.

19

4

Share

What is the boiling point of engine oil?

Typically, the boiling point of engine oil is around 150 degrees Celsius, but the exact boiling point varies by brand and requires actual testing to obtain an accurate value. In addition to the boiling point, other parameters of engine oil are as follows: Definition and significance of engine oil flash point: The lowest temperature at which an oil product can produce a flash when exposed to a flame under test conditions is called the flash point. It refers to the temperature at which the oil begins to flash when exposed to a flame during a test where the temperature is continuously increased. Depending on the testing method, the flash point of oil can be classified into open-cup and closed-cup flash points. The flash point of engine oil is an indicator of its volatility. The lighter the oil fraction, the higher its volatility, and the lower its flash point. Conversely, the heavier the oil fraction, the lower its volatility, and the higher its flash point. Additionally, the flash point is an indicator of the fire hazard of petroleum products. Definition and significance of engine oil pour point: The pour point of engine oil refers to the highest temperature at which the surface of the oil sample stops moving when cooled under specified test conditions. It is a conventional indicator used to measure the low-temperature fluidity of lubricating oils. A higher pour point indicates poorer low-temperature fluidity of the oil. Definition and significance of engine oil ash content: The solid residue left after burning an oil sample under specified conditions is called sulfate ash, expressed as a percentage. A higher number indicates that the engine oil may be more prone to sludge formation.

15

1

Share

Is there a make-up test opportunity on the same day if I fail the first attempt in Subject 1?

Yes, there is a make-up test opportunity on the same day if you fail the first attempt in Subject 1. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," candidates are allowed to take the Subject 1 test twice on the same day. If the first attempt is unsuccessful, a free second attempt is permitted. However, if the second attempt also fails, the Subject 1 test will be terminated, and the candidate must wait for ten days before reapplying. Subject 1, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license examination. The test covers driving theory basics, road safety laws and regulations, local ordinances, and related knowledge. It is conducted as a computer-based test with a time limit of 45 minutes. A passing score is 90 out of 100, with the test consisting of 100 questions, including single-choice and true/false questions, each worth 1 point. If a candidate answers 11 questions incorrectly, the system will automatically submit the test and end the session. Subject 1 test content includes: driver's license and motor vehicle management regulations; road traffic conditions and rules; traffic safety violations and penalties; traffic accident handling regulations; basic knowledge of motor vehicles; local ordinances; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Test-taking precautions for Subject 1: Candidates should dress appropriately (no slippers), avoid bringing electronic devices or bags into the examination hall, carry their ID cards, and queue to enter the waiting area. Observe the instructions and procedures displayed on the screen, and store personal belongings in lockers before entering the examination hall. Upon entering, verify identity at the assigned station and begin the test. Ensure the camera is properly aligned and adhere to test discipline. If the first attempt fails, a same-day make-up test is allowed. If the second attempt also fails, candidates must pay to reschedule. After completion, queue to collect and sign the score report; unsigned reports are considered invalid. There is no limit to the number of attempts for Subject 1, but Subjects 2 and 3 are limited to five attempts each. If all five attempts fail, the previously passed road driving skill test scores remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the examination on road traffic safety laws, regulations, and related knowledge. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge. The safe and civilized driving knowledge test is conducted after Subject 3, commonly referred to as Subject 4, although the official term (as per the Ministry of Public Security's Order No. 123) does not include "Subject 4."

9

0

Share

What is the Land Rover logo?

Land Rover logos include landrover, rangrover, and discovery. Land Rover produces various models of vehicles, and different models use different logos. The models under the Land Rover brand include: Range Rover Evoque, Range Rover Velar, Land Rover Discovery, Land Rover Defender, Range Rover, etc. Taking the 2021 Land Rover Defender as an example, it is a mid-to-large-sized SUV with body dimensions of: length 5018mm, width 2008mm, height 1967mm, a wheelbase of 3022mm, and a minimum ground clearance of 218mm.

15

4

Share

What is the difference between ABS and PBT keycaps?

Here are the specific differences between ABS and PBT keycaps: 1. In terms of feel: ABS material has a finer texture and smoother grain, while PBT material feels relatively rougher. 2. In terms of oil resistance: ABS material outperforms PBT in oil resistance, wear resistance, and smoothness. 3. In terms of light transmission: Common backlit keycaps are made of ABS material, which can be semi-transparent to accommodate backlight needs; PBT material's backlit keycaps have poor light transmission as they are semi-transparent, making it difficult to clearly see the characters.

19

4

Share

What is required for vehicle inspection in Beijing?

When undergoing vehicle inspection in Beijing, be sure to bring the following documents: 1. Original vehicle registration certificate. 2. Original ID card of the person coming for inspection. 3. Original valid insurance policy (for compulsory traffic insurance, only the copy retained by the traffic management department is required). Additional information: Vehicle annual inspection (or motor vehicle annual inspection) refers to the annual inspection conducted in accordance with the "Technical Conditions for Motor Vehicle Operation Safety" for vehicles that have already obtained official license plates and registration certificates. The purpose is to check the main technical conditions of the vehicle, urge the strengthening of vehicle maintenance, keep the vehicle in good condition, and ensure driving safety.

13

4

Share

What is the fuel consumption of the BYD Qin hybrid version?

What to do if you run a red light with a temporary license plate?

What is the boiling point of engine oil?

Is there a make-up test opportunity on the same day if I fail the first attempt in Subject 1?

What is the Land Rover logo?

What is the difference between ABS and PBT keycaps?

What is required for vehicle inspection in Beijing?

What letter is the license plate number in Zhongshan?

How Many Retake Opportunities Are There in the Driving Test?

How Many Liters of Transmission Fluid Does a Car Need?

Is It Safe to Store Engine Oil in the Car?