What is the fuel consumption of the Buick GL8?

1 Answers
StDavid
07/30/25 3:19am
Buick GL8's 1.5L model theoretically consumes about 6-7 liters per 100 kilometers. The fuel consumption of the same brand of car varies depending on road conditions. Here is the relevant information: 1. Fuel consumption differences: Poor driving skills can lead to increased fuel consumption. The same car driven by different people will have different fuel consumption. Only by summarizing experience and improving driving skills can the problem of high fuel consumption due to driving techniques be solved. 2. Precautions: If the fuel consumption is excessively abnormal, you can promptly go to a repair shop for maintenance, checking the engine, cylinders, and pistons to identify the specific cause.
Was this review help?
3
3
Share
More Forum Discussions

What Causes Steering Wheel Shaking When Braking at 120 km/h?

Here are the specific reasons for steering wheel shaking when braking at 120 km/h: 1. Wheel balance issue: A car wheel consists of a tire and a rim. When there is a problem with the wheel balance, it means the wheel is not in a balanced state during high-speed driving. If the wheel balance data is incorrect, the wheel's rotation center will shift, causing the wheel to shake, which in turn affects the steering wheel. 2. Rim problem: If the car's rim has been impacted during previous driving, causing it to deform. Due to the deformation of the rim, the wheel may shake during driving, leading to steering wheel shaking. 3. Chassis component issue: This usually occurs in cars with poor post-accident repairs. Due to the impact during the accident affecting the chassis components, steering wheel shaking may also occur.
10
0
Share

What is the displacement of the Honda Civic Type-R?

The all-new Civic Type-R is equipped with a 2.0T engine, delivering a maximum power output of 320 horsepower. Below are details about the Type-R: 1. Exterior Design: The Type-R concept car features aerodynamic body kits, with an extremely aggressive front fascia and an exaggerated rear spoiler. The quad exhaust layout highlights its distinctive identity. 2. Performance: The new model is expected to be powered by a 2.0T turbocharged engine, producing a maximum power of 310 horsepower and a peak torque of 400Nm. It is paired with a 6-speed manual transmission and adopts front-wheel drive. This high-performance Civic can accelerate from 0-100km/h in 5.7 seconds. Currently, Chen Binbo, Vice President of Dongfeng Honda, is in discussions with Honda Japan regarding its introduction. If introduced in the future, the maximum power of this new model might be adjusted down to 191kW (260 horsepower).
12
2
Share

What is the fuel consumption of the Magotan 380?

The Magotan 380 has 3 models currently on sale, including the 2020 380TSI-DSG Luxury, Flagship, and Premium models, all equipped with a 220-horsepower engine. The NEDC fuel consumption is 6.6L per 100 kilometers. The fuel tank capacity is the same across different Magotan 380 models. The distance that can be covered with a full tank of fuel is as follows: For models equipped with the 220-horsepower engine, the fuel tank capacity is 66L, allowing a distance of 66/6.6*100=1000KM with a full tank. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving behaviors such as rapid acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements, as larger displacements typically produce more power and require more gasoline for combustion. Heavier vehicles also consume more fuel due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, the engine control unit may command higher idle speeds to warm up the engine in cold temperatures, further increasing fuel consumption.
9
2
Share

Is it better to use internal or external air circulation for heating?

First turn on the internal circulation for heating until the car temperature rises, then switch to external circulation. Below are the specific introductions to internal and external air circulation in cars: 1. External circulation: External circulation refers to drawing air from outside the car, directing it to the air conditioning system for heating or cooling, and then blowing it out from the vents. External circulation essentially supplements fresh air to improve the air quality inside the car. It should be used for defrosting in winter or defogging in summer, as the air drawn from outside contains higher oxygen levels and is drier, making it more effective for defrosting or defogging. 2. Internal circulation: Internal circulation draws air from inside the car, creating an airflow cycle within the vehicle. The main function of internal circulation is to promptly and effectively prevent external dust and harmful gases from entering the car. It heats up the car faster in winter and cools it down quicker when the air conditioning is on in summer. It can also be used during smoggy days. Internal circulation cycles the air inside the car, helping to maintain the interior temperature more effectively.
16
4
Share

How to touch the sensors in the driving test (Subject 3)?

During the Subject 3 driving test, candidates need to walk counterclockwise around the vehicle for one round to locate and press the external sensors for 2 seconds each. Here are some important notes for the Subject 3 test: 1. Clutch pedal: It should only be used when starting, shifting up, shifting down, or stopping. Avoid pressing it during normal driving. When needing to slightly reduce speed, only use the brake pedal to prevent gear disengagement. 2. Accelerator pedal: The traffic light will flash several times before changing from green to red. Depending on the distance to the intersection and current speed, press the accelerator if the distance is short and speed hasn't decreased sufficiently. 3. Straightening and parking: Upon hearing the instruction and assessing road conditions, quickly turn on the right signal if there are no solid lines or if too close to the intersection. Check the rearview mirror, brake to reduce speed and merge. When the vehicle reaches the right-center position of the road, turn the steering wheel left. When the vehicle can straighten itself by inertia, press the clutch and straighten the wheels to park.
1
3
Share

What are the Volkswagen engine models?

Volkswagen engine models are as follows: 1. The EA111 series is the mainstay of Volkswagen's small-displacement models, including the 1.4TSI and 1.6L MPI models. Main models equipped with this engine include: POLO 1.6, Golf 1.4TSI/1.6, Magotan 1.4TSI, Superb 1.4TSI, Octavia 1.4TSI, Fabia 1.6, and Sagitar 1.6/1.4TSI. 2. The EA113 series is an 8-valve engine with only two valves per cylinder. The engine timing system uses a timing belt drive and features a single overhead camshaft design. Models like the New Bora, Lavida, POLO, and Golf are equipped with this engine. 3. The EA211 series includes both three-cylinder and four-cylinder products. The four-cylinder engines with cylinder deactivation technology offer better fuel economy. Models equipped with the EA211 include the Bora, Sagitar, Magotan, Lavida, and others. 4. The EA888 series is highly popular, powering almost all 1.8TSI and 2.0TSI models across Volkswagen Group brands such as Volkswagen, Audi, Skoda, and SEAT. 5. The EA390 series is a V6 naturally aspirated engine available in 3.0L, 3.2L, and 3.6L displacements, featuring direct fuel injection technology. 6. The EA288 series is a diesel engine capable of delivering 272 horsepower and 500Nm of torque. 7. The EA837 series offers a balanced performance and layout.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.