What is the fuel consumption of the Buick Excelle 1.5 manual transmission?

What are the causes of abnormal noise in the Phaeton's cold engine?

The causes of abnormal noise in the Phaeton's cold engine are: 1. Wear and aging of hydraulic lifters; 2. Excessive valve clearance; 3. Dirty throttle body; 4. Operating sound of the carbon canister solenoid valve; 5. Thermal expansion of the three-way catalytic converter; 6. Abnormal timing components; 7. Friction noise from the air conditioning belt; 8. Poor operation of the fuel tank vent valve; 9. Fluid impact inside the recirculation pump; 10. Partial blockage inside the fuel filter. Taking the 2013 Phaeton as an example, it is a full-size car with body dimensions of: length 5179mm, width 1903mm, height 1450mm, wheelbase of 3001mm, and a curb weight of 2260kg.

6

4

Share

What are the transmission options for the Regal?

The Regal comes standard with a 9-speed automatic transmission across the entire lineup, marking the first time Buick has employed a 9-speed transmission. Taking the 2019 Regal as an example, it falls under the midsize car category with the following dimensions: length 4902mm, width 1863mm, height 1456mm, wheelbase 2829mm, fuel tank capacity of 55 liters, and a curb weight of 1430kg. The 2019 Regal features a MacPherson strut front suspension and a multi-link rear suspension. It is powered by a 1.5L turbocharged engine delivering a maximum horsepower of 170PS, peak power of 125kW, and maximum torque of 252Nm, paired with the aforementioned 9-speed automatic transmission.

6

2

Share

How to use the thermostat in the Nissan Sylphy?

The method of using the thermostat in the Nissan Sylphy is: The thermostat in the Nissan Sylphy does not need to be manually activated; it automatically opens when the engine reaches a certain temperature. Taking the 2021 Nissan Sylphy as an example, it is a compact car with body dimensions of: length 4631mm, width 1760mm, height 1503mm, a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a curb weight of 1188kg. The 2021 Nissan Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, a maximum torque of 155Nm, and a maximum power of 90kW, paired with a 5-speed manual transmission.

7

0

Share

Can Engine Oil Be Changed in Advance?

Engine oil can be changed in advance. The method for changing engine oil is as follows: 1. Lift the vehicle, remove the undercover, and place a container beneath the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the drain plug after the oil is fully drained and wipe it with a tissue to check for leaks; 3. Reinstall the undercover, lower the vehicle, and add new oil through the filler port. The functions of engine oil include: 1. Reducing friction and high temperatures; 2. Minimizing gas leakage and preventing contamination from external pollutants; 3. Protecting components from contact with water, air, and acidic harmful gases; 4. Buffering pressure increases in the engine cylinder ports; 5. Flushing away dirt generated on the surfaces of working parts.

13

4

Share

What is the adjustment method for excessive steering wheel play?

The adjustment methods for excessive steering wheel play are: 1. Perform a four-wheel alignment; 2. Adjust the steering gear and check the clearance of various connecting components, then make necessary adjustments. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, and airplanes. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a skeleton, foam, and the driver's airbag. Precautions for using the steering wheel include: 1. Do not apply excessive force when turning the steering wheel or make sudden turns; avoid turning the steering wheel when the vehicle is stationary. 2. When driving on bumpy roads, hold the steering wheel firmly with both hands to prevent loss of control and potential accidents. 3. Reduce speed when turning. 4. Gradually turn the steering wheel according to the curvature of the bend when entering a curve.

1

0

Share

Do I Need to Replace the Entire Front Bumper If the Clip Is Broken?

If the front bumper clip is broken but the bumper itself hasn't come loose, replacement may not be necessary. However, if one side of the bumper has become detached, it indicates severe clip damage that requires prompt replacement. Functions of the bumper: 1. Safety protection - absorbs external impacts and protects pedestrians 2. Decorative purpose 3. Improves vehicle aerodynamics Bumper construction: The bumper consists of an outer panel, cushioning material, and crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed from cold-rolled sheet metal pressed into a U-shaped channel. The outer panel and cushioning material attach to the crossbeam, which connects to the vehicle frame rails with screws.

3

4

Share

What is the fuel consumption of the Buick Excelle 1.5 manual transmission?

What are the causes of abnormal noise in the Phaeton's cold engine?

What are the transmission options for the Regal?

How to use the thermostat in the Nissan Sylphy?

Can Engine Oil Be Changed in Advance?

What is the adjustment method for excessive steering wheel play?

Do I Need to Replace the Entire Front Bumper If the Clip Is Broken?

What Causes Abnormal Noise in Idle Engine?

What is the method for disassembling and assembling the Tiida dashboard?

What are the body dimensions of the Volvo V60?

How to Add Refrigerant Oil to a Car?