What is the fuel consumption of the Buick Envision Plus?

1 Answers
VonKaden
07/29/25 11:14pm
The fuel consumption of the Envision Plus is 7.4 to 7.8L. Not maintaining the engine leads to higher fuel consumption: Abnormalities in the engine ignition system also significantly affect fuel consumption. Issues such as inaccurate ignition timing, leaking high-voltage wires, or weak ignition due to spark plug carbon buildup can reduce engine combustion efficiency and increase fuel consumption. Additionally, poor engine maintenance can lead to a 10% to 20% increase in fuel consumption, which is considered normal. Using the trunk as storage increases fuel consumption: The relationship between vehicle weight and fuel consumption is directly proportional. It is said that for every 10% reduction in vehicle weight, fuel consumption will decrease by a corresponding percentage.
Was this review help?
9
0
Share
More Forum Discussions

Which Haval H6 version comes with automatic parking function?

Four versions of the Haval H6 are equipped with automatic parking function: the National Tide Edition 1.5GDIT Automatic Super Luxury, the Second Generation 1.5GDIT Automatic Super Luxury, the Third Generation 1.5T Automatic Two-Wheel Drive Supreme, and the Third Generation 2.0T Automatic Four-Wheel Drive Supreme. Below are the specific details of the Haval H6: 1: Body Dimensions: The Haval H6 measures 4615mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2680mm, a fuel tank capacity of 58L, and a curb weight of 1675kg. 2. Powertrain Configuration: The Haval H6 features a MacPherson strut front suspension and a double-wishbone independent rear suspension. It is powered by a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, a peak power of 110kW, and a maximum torque of 210Nm, paired with a 7-speed dual-clutch transmission.
4
4
Share

Where is the Crankshaft Position Sensor on the Haval H6?

Haval H6 crankshaft sensor is located near the crankshaft flywheel. The following are specific details about the Haval H6 crankshaft position sensor: 1. Overview: The function of the crankshaft position sensor is to determine the position of the crankshaft, that is, the rotation angle of the crankshaft and the engine speed. It usually works in conjunction with the camshaft position sensor to determine the basic ignition timing. 2. Function: The crankshaft position sensor is usually installed at the front end of the crankshaft (near the pulley), the rear end of the crankshaft near the large flywheel, or the middle of the crankshaft. Early models also had it installed inside the distributor, making it one of the most important sensors in the control system. Its functions include detecting engine speed, hence it is also called the speed sensor; detecting the top dead center position of the piston, so it is also known as the top dead center sensor, including detecting the top dead center signals of each cylinder for ignition control and the top dead center signal of the first cylinder for sequential fuel injection control.
14
2
Share

Does the Wuling Hongguang currently adopt a split-type bushing design?

Wuling Hongguang utilizes a split-type control arm bushing. The Wuling Hongguang is the first independently developed crossover product between commercial and passenger vehicles launched by SAIC-GM-Wuling. Its sleek exterior design, versatile and practical spacious interior have attracted a wide audience. Below is a relevant introduction to the Wuling Hongguang: 1. The Wuling Hongguang is the first independently developed crossover product between commercial and passenger vehicles launched by SAIC-GM-Wuling. This product features a sleek exterior design and a versatile, practical, and spacious interior. The Wuling Hongguang achieves a perfect balance between power and fuel efficiency, along with strong performance in handling and safety, overturning the traditional perception of commercial vehicles. 2. With its small displacement, clever design, refined interior, powerful cross-segment performance, and an absolutely attractive price range of 44,800 to 66,800 yuan, the Wuling Hongguang has carved out a new niche in the commercial vehicle market dominated by larger models. "Compact, refined, and practical" is the unanimous evaluation of the Wuling Hongguang by industry professionals.
4
5
Share

How to Activate the Horn Sound When Locking the Langdong?

To set the horn sound when locking the vehicle, use the remote key to lock the car, then simultaneously press the unlock and lock buttons on the remote key for more than three seconds. After the vehicle is locked via the remote key, the horn will sound, indicating that the vehicle has been successfully locked. Here is some relevant information about the Langdong: 1. Exterior: The Hyundai Langdong features a mesh-style front grille. Although not large in size, its simple design enhances the sporty look. The headlight cluster maintains the same design as the 2015 model but has an optimized internal structure, equipped with lenses and integrated light-guided daytime running lights. Paired with circular fog lights adorned with L-shaped chrome accents, the overall appearance is youthful and stylish. 2. Interior: The Beijing Hyundai Langdong incorporates the X-shaped design concept in multiple areas, using black or beige interiors accented with silver trim to add a sense of fashion and three-dimensionality. The overall interior draws heavily from the design of the eighth-generation Sonata, especially the dynamic and visually striking lines of the center console, reflecting a strong sporty style. The seats are well-designed, offering excellent comfort and support, with good wrapping for the back and legs.
8
1
Share

Where is the air conditioning filter of Haima S5 located?

Haima S5 air conditioning filter is located on the right side of the accelerator pedal. For replacement, first remove the triangular cover next to the accelerator. After removal, you will see a black cover plate. Carefully pry it open with a screwdriver, being cautious not to break the clips. Once the cover plate is removed, the air conditioning filter will be visible, and you can then pull it out. Pay attention to the installation direction of the filter during replacement, and the installation sequence is the reverse of the removal process. Below is an introduction about the Haima S5: 1. The Haima S5 was designed in collaboration between Haima Motors and the Italian LD-A design company. It was meticulously developed over three years by the Haima Motors R&D Center and underwent extensive technical cooperation with international companies such as Germany's Bosch BOSCH, Sweden's Autoliv AUTOLIV, Japan's TEIN, and Belgium's Punch PUNCH. It has undergone rigorous durability tests over a million kilometers of harsh road conditions and millions of vibration tests, making it a highly reliable and stable SUV. 2. The Haima S5 represents the latest achievement in Haima's independent 2.0 era SUV lineup. Its introduction has made the Haima SUV series more comprehensive, fully meeting the differentiated needs of the segmented market.
6
0
Share

What is the correct starting method for a 7-speed dual-clutch transmission?

The correct starting method for a 7-speed dual-clutch transmission is: When starting, make sure to press the brake pedal, then shift into N (Neutral) gear to start the engine. After the engine starts, shift into D (Drive) gear, release the brake pedal, and press the accelerator to begin moving the vehicle. Below are some driving tips for cars: 1. Based on engine structure and driving experience, it is generally recommended to keep the engine speed around 2000 RPM when driving in urban areas. This ensures good power performance while maintaining fuel efficiency. While driving, pay attention to the engine sound and feel at different RPMs and speeds, and shift gears at the appropriate time. Since 1st gear is the starting gear and has a gear ratio similar to reverse gear, it is not suitable for prolonged high-speed operation. Typically, you can shift to 2nd gear once the vehicle starts moving and gains momentum. 2. When shifting gears, do it swiftly and decisively. Press the clutch pedal quickly and release it slowly to avoid a drop in engine RPM after shifting. If this happens, downshift again, or even skip a gear if necessary. When downshifting, press the clutch first before releasing the accelerator, otherwise the engine will slow down the vehicle. 3. When upshifting, lightly press the accelerator before releasing the clutch.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.