What is the fuel consumption of the Borgward BX5?

1 Answers
EvanFitz
07/30/25 7:32am
The Borgward BX5 has a fuel consumption of 9.2 liters per 100 kilometers. Here are some related details about fuel consumption: 1. Driving habits and road conditions: Fuel consumption is greatly influenced by driving habits and road conditions. Avoid heavy acceleration; gradual acceleration from a start is the most fuel-efficient. To save fuel, avoid pressing the accelerator pedal hard when starting, as this can increase fuel consumption by 2 to 3 times compared to normal acceleration. 2. Braking: Maintaining a safe distance and avoiding frequent braking can save even more fuel. If you don't keep a safe distance, you may need to brake frequently on the road. When braking, the automatic transmission shifts to a lower gear, requiring the car to accelerate again from a lower gear. Starting from a standstill or in a lower gear consumes more fuel from the engine.
Was this review help?
20
0
Share
More Forum Discussions

How to use Mazda i-stop?

To use Mazda i-stop, press and hold the i-stop button for more than 2 seconds to toggle it on or off. The i-stop button is located on the lower left panel of the steering wheel. When i-stop is activated, the dashboard will display it in green; when deactivated, it will show in orange. The conditions for i-stop activation are: 1. The engine is fully warmed up and the hood is closed; 2. All doors and windows are closed; 3. The vehicle is stationary and the battery is in good condition; 4. The driver's seatbelt is fastened; 5. The windshield defroster is turned off; 6. The air conditioning is on; 7. The air conditioning temperature is set to match the interior temperature.
19
5
Share

What to Do When the Seat Belt Gets Stuck?

If the seat belt gets stuck, you can try to gently retract and extend it to restore its function. In case of a mechanical failure, it is recommended to seek professional repair. Improper use of a stuck seat belt can cause deformation, making it prone to jamming at the entry and exit points. This situation is relatively simple to resolve; usually, straightening the seat belt and slowly pulling it out will suffice. A seat belt is a safety device used in equipment, such as aircraft or during high-altitude work and performances, to ensure safety. The main materials used are polyester, polypropylene, and nylon. A seat belt is not just the webbing; besides the webbing, it consists of other assembled components.
20
4
Share

Is the Land Cruiser domestically produced?

The Land Cruiser is available in both domestically produced and imported versions. The domestic version is manufactured by FAW Toyota, with its last model being the 2016 version, which includes four models, all meeting the China V emission standards. In terms of body dimensions, the Land Cruiser measures 5095mm in length, 1975mm in width, and 1930mm in height, with a wheelbase of 2850mm. Exterior-wise, the Land Cruiser adopts a family-oriented design, featuring very textured body lines and a visually appealing grille. Its large 5-meter-long body ensures excellent interior space. Under the hood, the Land Cruiser is equipped with a 4.0-liter V6 naturally aspirated engine, delivering a maximum power of 202 kW and a peak torque of 385 Nm.
2
2
Share

How to Deal with Insufficient Boost in Buick Engine?

Turbocharger A is in a state of insufficient boost. Replacing the turbocharger will resolve the issue. Below are the specific causes of turbocharger failure: 1. Engine-related: The gap between the piston rings and cylinder liners increases, leading to poor sealing, reduced engine power output, and oil entering the combustion chamber through the gaps, resulting in blue smoke from the exhaust. 2. Turbocharger-related: The intake passage before the turbocharger is blocked, causing excessive vacuum at the compressor end of the turbocharger. Oil flows from the turbocharger intermediate housing into the compressor impeller and enters the combustion chamber along with the compressed air, causing the turbocharger speed to drop. The engine's intake air volume is significantly insufficient, manifesting as reduced power and blue smoke from the exhaust.
15
0
Share

What to Do When a Buick Engine Overheats and Requests Idling?

Here are the solutions for when a Buick displays an engine overheating warning and requests idling: 1. Idle the car without turning it off: Open the hood, turn on the heater to dissipate heat as quickly as possible, and if conditions allow, park the car in a shaded area. 2. Check the coolant: Inspect the radiator hoses for any leaks and then check if the coolant level is sufficient. If there is no available coolant in the car, mineral water can be used as a temporary substitute, but it should be replaced with new coolant afterward. 3. Do not add coolant immediately: Boiling water in a sealed container creates pressure. If the radiator cap is opened immediately after the water boils, the internal pressure can cause the boiling water to spray out, potentially causing burns.
9
5
Share

How to Replace the Key Battery for X-Trail?

The method to replace the key battery for X-Trail is: Press the button on the back of the key, remove the mechanical key, use a flat-head screwdriver to detach the battery cover, and you will see the battery. Remove the key battery for replacement, avoiding touching the internal circuits and electronic connectors. When installing the new battery, ensure the positive side faces the bottom of the casing, then close the cover. The X-Trail is a model under Dongfeng Nissan, with body dimensions of 4630mm in length, 1785mm in width, and 1685mm in height, and a wheelbase of 2630mm. The X-Trail features a new chassis and suspension system, with the rear suspension adopting an advanced multi-link independent structure, significantly improving handling compared to the first-generation model's link-pillar structure.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.