What is the fuel consumption of the Bora?

Which side is the accelerator in an automatic transmission?

In an automatic transmission, the accelerator is on the right side, and the brake is on the left. The function of the car accelerator is to control the engine's output power and generate thrust by regulating the throttle opening of the carburetor to manage the cylinder's filling volume and the fuel flow rate of the fuel regulator. Precautions for driving an automatic transmission car include: 1. Do not shift into P gear while driving; 2. After driving, the engine must be turned off and shifted into P gear before the key can be removed; 3. Do not shift into N gear to coast while driving; 4. When starting the vehicle in P or N gear, move the gear lever from P gear while pressing the brake, turn on the power, press the brake, shift to N gear, and after ignition, shift to D gear to move forward directly.

9

2

Share

What does the S/L gear in an automatic transmission represent?

In an automatic transmission, the S stands for Sport mode, while the L represents Low gear. The functions of the S gear are: 1. In this mode, the vehicle's power performance is enhanced, commonly used for overtaking, uphill driving, descending long slopes, traffic congestion, and clearing carbon deposits; 2. The transmission can shift gears freely. When the vehicle is in L gear, the transmission will switch between the low gears, 1st and 2nd. An automatic transmission vehicle does not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The gears in an automatic transmission vehicle include: 1. P gear for Parking; 2. R gear for Reverse; 3. N gear for Neutral; 4. D gear for Drive; 5. M gear for Manual mode; 6. L gear for Low gear; 7. S gear for Sport mode.

10

4

Share

Why is there oil dripping under the car after parking?

Reasons for oil dripping under the car after parking: 1. The car chassis has been impacted, causing oil seal damage; 2. Aging of the fuel tank sealing ring; 3. Substandard assembly of car components; 4. Excessive engine oil level; 5. Damage to the front and rear crankshaft oil seals of the car. If the oil leakage is severe, it is necessary to promptly go to a repair shop or 4S store for professional inspection and repair to prevent safety hazards during the use of the car. Precautions for the car chassis include: 1. Regularly clean the car chassis to prevent debris from adhering to the chassis and affecting the normal operation of the vehicle; 2. Always slow down when passing through bumpy road sections to prevent the chassis from being impacted.

15

3

Share

What do the letters on an automatic transmission car mean?

Automatic transmission car letters refer to: 1. P gear is the parking gear, also known as the starting gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the drive gear, also known as the forward gear; 5. L gear is the low gear; 6. S gear is the sports mode; 7. M gear is the manual mode. Precautions for driving an automatic transmission car include: 1. Start slowly and gently, engage P gear or N gear when starting, and avoid coasting in neutral; 2. Shift back to N gear when waiting at traffic lights or briefly stopping, and engage P gear when parking; 3. Do not shift into P gear while the car is moving; 4. Ensure the vehicle is completely stopped before shifting into R gear for reversing.

11

3

Share

Can you change lanes in a variable lane?

Variable lanes allow lane changes, but you must use your turn signal. The lanes are marked with solid lines, so you must avoid crossing them, or you may be caught by surveillance cameras. Variable lanes, also known as tidal flow lanes, are implemented in many large cities to alleviate congestion. They are set up at major intersections to redirect traffic from the busier side, thereby easing traffic pressure and improving travel efficiency. Important notes: 1. When driving in a variable lane, pay attention to the traffic signal: You can only enter the lane when the light turns green. Some variable lanes allow straight passage when the light is green, but if it's red, you can only enter the lane without proceeding straight—be sure to check carefully. 2. Variable lanes are not open all day: Typically, they operate from 7:00 AM to 9:00 AM, so make sure to check the exact operating hours and follow the designated times.

7

5

Share

How to Clear the Maintenance Reminder for Octavia?

Steps to clear the maintenance reminder for Octavia: 1. Turn off the car; 2. Press and hold the trip reset button, then turn on the ignition; 3. Rotate clockwise, then turn off the ignition; 4. Start the vehicle to check if the reminder is cleared. The Octavia has a body size of 4675mm in length, 1814mm in width, and 1460mm in height, with a wheelbase of 2686mm. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113 hp, a maximum power of 83 kW, and a maximum torque of 145 Nm, paired with a 5-speed manual transmission. The exterior design adopts the Skoda family design language, showcasing a simple, fashionable, and elegant styling.

17

4

Share

What is the fuel consumption of the Bora?

Which side is the accelerator in an automatic transmission?

What does the S/L gear in an automatic transmission represent?

Why is there oil dripping under the car after parking?

What do the letters on an automatic transmission car mean?

Can you change lanes in a variable lane?

How to Clear the Maintenance Reminder for Octavia?

How to Remove Reflective Stickers from a Car?

Is it mandatory to service the car at a 4S shop during the warranty period?

Is Baojun a Joint Venture or Domestic Car?

How to Open the Front Hood of a Wuling Hongguang Vehicle?