What is the fuel consumption of the BMW X5?

1 Answers
DiHarmony
07/29/25 10:50pm
The fuel consumption of the BMW X5 is 9.1-10L/100KM. The currently available BMW X5 models include the 2021 facelift xDrive30i M Sport Package, 2021 facelift xDrive30i X Design Package, 2022 xDrive30i M Sport Package, 2022 xDrive40i M Sport Package, and 2022 xDrive40i Premium M Sport Package. In the same class, the Audi Q7 2022 45TFSI quattro S line Sport has a combined fuel consumption of 8.8L/100KM, while the Discovery 2022 300PS S has a combined fuel consumption of 7.3L/100KM. Factors affecting vehicle fuel consumption: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before red lights can increase fuel consumption. Vehicle characteristics: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger engines typically produce more power and require more gasoline for combustion. Heavier vehicles also tend to have higher fuel consumption due to the greater driving torque needed to move the additional weight.
Was this review help?
20
0
Share
More Forum Discussions

Why is there ghosting on the car's front windshield film?

Ghosting on the car's front windshield film may be caused by poor film quality or improper installation. Here are some precautions for car window tinting: 1. Avoid washing the car: Try to avoid washing the car within three days after tinting to prevent the film from peeling off due to moisture. Also, refrain from using the rear window defroster for a week, as moisture can adversely affect the defroster lines. After installation, you can gently wipe the film surface with a wet towel, sponge, or soft cloth. Additionally, you may notice a hazy appearance caused by water vapor inside the film during the drying process, which is normal and will gradually disappear. 2. Avoid rolling windows up and down: For the first week after tinting, try to avoid rolling the windows up and down (especially for newly tinted cars). It takes 5-7 days for the film to firmly adhere to the window. During this period, the edges of the film can easily curl or shift when the windows are operated. 3. Be careful when cleaning: If stains appear on the film, avoid using chemical solvents. Instead, use a damp cleaning towel, water-soaked paper towels, a cloth with mild detergent, or a rubber squeegee for cleaning. Avoid using abrasive materials or tools that could scratch or damage the film to protect the window tint.
3
4
Share

Can you introduce the interior functions of the 2021 Sagitar?

2021 Sagitar interior functions brief introduction: 1. Central control buttons: (1) sync: Dual-zone air conditioning switch. Models equipped with this feature allow separate temperature control for driver and front passenger. (2) Electronic Stability Program (ESP): Enabled by default. Manual deactivation is generally not recommended. This system effectively prevents loss of vehicle control during extreme driving conditions. (3) Hazard warning lights (commonly known as emergency flashers): Serve as warning signals for emergency or special situations. (4) Volume control buttons: In addition to normal knob adjustment, left/right tilting can switch tracks. (5) Parking radar/camera: Alerts drivers to surrounding obstacles through visual display and warning sounds. (7) Auto Hold: At traffic lights, the vehicle won't roll away after releasing the brake pedal. The wheels unlock when the accelerator is pressed, allowing the vehicle to proceed. 2. Door buttons: On the driver's door of the Volkswagen T-Cross: Rear window lock button, one-touch up/down window controls for all four doors, and exterior mirror adjustment switches (for angle adjustment, heating function, etc.). 3. Roof buttons: Mainly lighting controls: Welcome lights, driver reading light, front passenger reading light, interior light switch, and sunroof switch.
15
5
Share

What lights to use when turning at an intersection without traffic signals?

At intersections without traffic signals, use the following lighting: Use high and low beams: When passing through an intersection without traffic signals, alternate between high and low beams at least twice. Pay attention to traffic: Slow down in advance and alternately use high and low beams to signal, while closely monitoring the traffic situation ahead. Information about traffic signals is as follows: Road traffic signals: They are a category of traffic safety products, serving as an important tool to strengthen road traffic management, reduce traffic accidents, improve road efficiency, and enhance traffic conditions. Applicable to: Crossroads, T-junctions, and other intersections, controlled by road traffic signal controllers to guide vehicles and pedestrians to pass safely and orderly.
8
1
Share

Is the stationary vehicle at fault in a side-swipe collision on a narrow road?

Determining whether a stationary vehicle is at fault in a side-swipe collision on a narrow road is as follows: No fault: If the vehicle had already stopped during the encounter and was still sideswiped, the other party bears full or primary responsibility when one party is not at fault. Illegal parking: If the vehicle was parked in the wrong direction (against traffic) and was sideswiped during the encounter, then the owner of the wrong-way vehicle is at fault. Information about oncoming traffic is as follows: Oncoming traffic: A traffic term referring to vehicles or trains traveling in opposite directions passing each other at a certain point. Note: Prepare in advance when encountering oncoming traffic to avoid psychological panic and operational confusion.
12
0
Share

At what water depth will the engine be flooded?

When the water depth reaches the following conditions, the engine may be flooded: Sedans: For most sedans, when the water level exceeds 20 centimeters, there is a risk of engine flooding. SUVs: For SUVs with higher ground clearance, the risk of engine flooding occurs when the water depth exceeds 30 centimeters. The consequences of engine flooding are as follows: Engine connecting rod deformation: This leads to shortened piston stroke, preventing gases from being fully compressed. Piston leakage: The piston rings lose elasticity or fail to seal properly, causing gas leakage and compressed gases to enter the crankcase. Poor sealing: When the intake and exhaust valves do not close tightly, compressed gases leak into the intake manifold and exhaust manifold.
16
4
Share

Which Mercedes-Benz model has the cheapest frameless doors?

Mercedes-Benz's most affordable model with frameless doors is the CLA-Class. Here's an extended introduction about the Mercedes-Benz CLA-Class: 1. Origin: The Mercedes-Benz CLA is the brand's first four-door coupe developed based on a compact car chassis. Recognizing the market demand for four-door coupe models, Mercedes-Benz extended its smooth and elegant roofline further downward, launching the all-new CLA to tap into the potential market of young consumers. 2. Performance: The Mercedes-Benz CLA is built on the same MFA platform as the new A-Class, featuring a stylish and dynamic exterior design. The front end largely mirrors the A-Class, but the enlarged lower air intake gives it a visually striking appearance. Additionally, the streamlined body combined with the rounded rear creates a harmonious look, achieving an impressive drag coefficient of 0.23. 3. Exterior: The front fascia adopts a sporty and aggressive design, with a vertical-slat grille, sharp and fierce headlights, distinctive LED daytime running lights, dynamic air intakes on both sides, and a sporty front bumper. The low-slung profile gives it an impactful stance, with smooth and flowing roofline and window lines, sleek black mirrors, sharply contoured door panels, and stylish alloy wheels. The rear features a youthful and sporty design, with a sporty spoiler, refined and unique taillights, and a quad-exhaust setup.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.