What is the fuel consumption of the BMW X3 28i Sport Edition?

1 Answers
DiNathan
07/29/25 5:40pm
BMW X3 28i Sport Edition has a fuel consumption of around 9.7 liters per 100 kilometers. How to calculate car fuel consumption: Fill up the car's gas tank completely and reset the odometer to zero. After driving for a certain period, refill the tank and note the amount of fuel added. Then, divide the amount of fuel by the distance traveled to get the fuel consumption per kilometer. Introduction to car fuel consumption: Fuel consumption, commonly referred to as the amount of fuel a car uses to travel 100 kilometers, usually refers to constant-speed fuel consumption. Constant-speed fuel consumption (Constant-Speed Fuel Economy) is an indicator of a car's fuel efficiency when driving at a constant speed on good road conditions. Since constant-speed driving is a basic driving condition on highways and is easy to measure, it is widely used. However, because cars in actual driving often experience acceleration, deceleration, braking, and engine idling, constant-speed fuel consumption is often lower than the actual fuel consumption, resulting in a significant difference.
Was this review help?
9
3
Share
More Forum Discussions

Is it troublesome to register a car in a different location?

Registering a car in a different location is basically the same process as registering it locally. If the car owner needs to register the car in a different city, they will need a nationwide temporary license plate. If it's within the same city, a regular temporary license plate will suffice. The registration process is the same as for a locally purchased car: bring a copy of the owner's ID card, the original and a copy of the vehicle qualification certificate, the original tax payment slip, and fill out a tax declaration form. After paying the tax, you will receive a receipt and the original and duplicate copies of the tax payment certificate. The original is kept by the individual, while the duplicate is used for registration. Below is additional information on the required documents for registration in China: 1. China's regulations for new car registration stipulate that as long as the vehicle has the four basic documents—a formal invoice, qualification certificate, purchase tax (additional fee), and compulsory insurance (traffic compulsory insurance)—it can be registered. 2. Here is additional information on the materials the car owner needs to prepare: (1) Original and copy of the qualification certificate. (2) Original purchase invoice (three copies in total). (3) Owner's ID card. (4) Insurance policy.
7
4
Share

What is the reason for no power to the compressor in a 2005 Passat?

The air conditioning high and low pressure switch may be damaged, or the relay may have a problem. The following are the specific functions of the air compressor: 1. Compressed gas as power. After being compressed, air can be used as power for machinery and pneumatic tools, as well as for control instruments and automation devices. 2. Compressed gas is used for refrigeration and gas separation. Gas is compressed, cooled, and expanded to liquefy, which is used for artificial refrigeration, commonly known as an ice maker or ice machine. If the liquefied gas is a mixture, the components can be separated in a separation device to obtain various gases with qualified purity. For example, the separation of petroleum cracking gas involves compression first, and then the components are separated at different temperatures. 3. Compressed gas is used for synthesis and polymerization. In the chemical industry, certain gases are pressurized by compressors to facilitate synthesis and polymerization. For example, nitrogen and hydrogen synthesize ammonia, hydrogen and carbon dioxide synthesize methanol, and carbon dioxide and ammonia synthesize urea. 4. Gas transportation. Compressors are also used for pipeline transportation and bottling of gases. For example, the transportation of remote coal gas and natural gas, and the bottling of chlorine and carbon dioxide.
4
0
Share

What Needs to Be Checked Before Driving on the Highway?

When driving at high speeds, the key areas to inspect are the engine, brakes, and chassis components. Taking the engine as an example, it is essential to check the engine cooling system before high-speed driving. If there is an issue with the coolant, such as insufficient levels, it can easily lead to engine overheating and boiling at high speeds. Additionally, the windshield washer fluid should also be checked. During high-speed driving, the windshield tends to get dirty quickly. If the glass becomes dirty and there is no washer fluid, visibility can be severely impaired. For the brakes, it is necessary to check whether the brake fluid is contaminated and if the brake pads are worn. Worn brake pads should be replaced promptly, as brakes are a critical safety component of the vehicle and directly impact driving safety. Lastly, tire pressure should be checked before high-speed driving. The tire pressure must be within the standard range. At high speeds, tire pressure increases due to the heat generated by tire movement. Incorrect tire pressure can lead to various issues. Overinflation increases the risk of a blowout, while underinflation can reduce vehicle performance and even increase fuel consumption.
12
4
Share

What are the functions of the Wuling Hongguang center console buttons?

Each button on the Wuling Hongguang center console corresponds to the following functions: volume adjustment, navigation, hazard warning lights, channel selection, answering calls, and the HOME button. Here is some relevant information about the Wuling Hongguang: 1. Exterior Design: The Wuling Hongguang features a dual-U front fascia design and a three-dimensional vertical waterfall-style chrome grille, giving the front end a more stylish and dynamic appearance. 2. Interior: The interior adopts a sedan-like design style, with a simple and clear instrument panel and a well-organized control console layout. 3. Powertrain: The Wuling Hongguang is equipped with two engines: the P-TEC 1.2L and the 1.5L-DVVT, both designed and manufactured to General Motors' global powertrain standards. These engines utilize a double overhead camshaft (DOHC) design, which is relatively rare in small-displacement engines. While ensuring ample power, they also demonstrate excellent fuel efficiency, significantly reducing vehicle operating costs.
12
5
Share

When Did Automatic Transmission Cars Become Popular in China?

Automatic transmission cars became popular in China after the 1950s. What is an automatic transmission? It means driving without the need for constant gear shifting; whereas manual transmission vehicles require continuous gear shifting and clutch operation to change speed during driving. In fact, the FAW CA72, an old Hongqi model manufactured in the late 1950s, was an automatic transmission car, as was the later CA770 Hongqi. However, these two models were not the earliest automatic transmission cars in China. After the 1940s, many Cadillac cars with Hydra-Matic automatic transmissions were imported into China, but even these were not the earliest automatic transmission cars in the country. It can be said that the first automatic transmission vehicle in China was not a four-wheeled car. "China's first automatic transmission car" includes both domestically produced and imported vehicles. Initially, people thought Jetta was the first brand of automatic transmission cars in China, but the title of "China's first" actually does not belong to it at all. "In several major cities like Beijing, Shanghai, and Guangzhou, many post-90s generation first learned about automatic transmission cars through imported models such as the Toyota Camry, Lexus, and Cadillac Fleetwood.
8
4
Share

What is Required for Vehicle Inspection?

According to regulations, vehicles must undergo regular safety technical inspections at testing stations; otherwise, they will lose their driving eligibility. Vehicles are categorized into exempt and non-exempt inspection types. For vehicles exempt from inspection for the first 6 years, new cars only need to apply for an inspection compliance mark at the vehicle management office every two years during the first six years, without the need for on-site inspection. Simply bring your ID card, a copy of it, the vehicle registration certificate, a copy of the compulsory traffic insurance, fill out the annual inspection application form, and collect the annual inspection mark at the vehicle management office within the validity period. Non-exempt vehicles must be driven to the testing station for on-site inspection. During the annual inspection, the following steps should be followed in sequence. Emission Test: The emission test is the first item of the annual inspection, primarily checking whether the emissions meet the standards. Violation Check: Verify if the owner has any outstanding traffic violations. Exterior Inspection: Check if the car's lights, glass, suspension, sunroof, tires, and other exterior components remain unchanged. On-site Inspection: Inspect the vehicle's braking system, control system, lighting, chassis, and other components.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.