What is the fuel consumption of the BMW 525li?

1 Answers
LeEzra
07/29/25 2:40pm
According to comprehensive data from the Ministry of Industry and Information Technology, the combined fuel consumption of the BMW 525li is 6.5L/100km. Below is relevant information about the 2021 facelift luxury package BMW 525li: 1. Powertrain: Equipped with a 2.0L turbocharged 4-cylinder B48B20C engine, paired with an 8-speed automatic transmission. 2. Body dimensions: The length, width, and height are 5106mm, 1868mm, and 1500mm respectively. The wheelbase is 3105mm. 3. Chassis: The drivetrain is front-engine rear-wheel drive, with a double-wishbone independent front suspension and a multi-link independent rear suspension.
Was this review help?
1
5
Share
More Forum Discussions

What is the tire specification model for the ninth-generation Honda Accord?

The ninth-generation Accord tire specification is 215/60R16, where 215 refers to the tire width, 60 refers to the aspect ratio, R stands for radial tire, and 16 indicates the 16-inch wheel hub. Methods to distinguish tires: The model of a tire can be identified based on the data on the side of the car tire. Generally, the side of the tire will indicate the tire width, aspect ratio, tire type, and the applicable size of the tire. When purchasing tires, observe the data of your own tires and then make a purchase accordingly. Meaning of tire model: There will be a series of numbers marked on the side of the tire. These numbers are separated, and generally, the first three digits refer to the width of the car tire. Typically, the width of the tire ranges between 145 and 285, and different car displacements may also result in the use of different tire specifications.
18
5
Share

What causes the EECU failure in Dongfeng Tianlong trucks?

It is generally believed to be caused by issues with the accelerator pedal, accelerator pedal wiring, vehicle VECU failure, or communication line faults between the instrument cluster, VECU, and EECU. Below are the relevant details: 1. Fault analysis: First, supply 5V power to the accelerator pedal sensor 1 and 2 power lines while grounding the ground wire. Use a multimeter to measure whether the feedback signals from sensor 1 and 2 are 0.76 and 0.37, respectively. If the relationship between the two is correct, then the accelerator pedal is not the issue. 2. Purple connector: Disconnect the purple connector on the VECU and locate wires 0012 and 0013, which are yellow and green, respectively. Use a multimeter to measure whether the resistance between them is 120Ω. If the measurement shows 120 ohms, then the initial possible causes can be ruled out based on the above measurements.
16
0
Share

What causes abnormal noise when accelerating at low speeds in a Corolla?

Abnormal noise during low-speed acceleration in a Corolla is primarily caused by using inferior quality engine oil, prolonged intervals between oil changes, or insufficient oil levels. These conditions can increase friction between components such as valves and guides, as well as hydraulic lifters, resulting in amplified engine noises. Steps for changing engine oil: Lift the vehicle and remove the underbody protection panel. Place a container beneath the oil drain plug; loosen the drain plug and use an air gun to blow for two minutes at the oil filler port. After draining, tighten the drain plug and wipe it with a tissue to check for leaks; reinstall the protection panel and lower the vehicle. Finally, add new oil through the filler port. Consequences of driving with insufficient oil: Firstly, lubrication effectiveness significantly deteriorates. Secondly, lack of proper lubrication may lead to engine seizure. The severity of damage increases with lower oil levels.
9
0
Share

How many points are deducted for stalling during a right-angle turn?

Stalling during a right-angle turn results in a deduction of 100 points. Below are relevant details about point deductions for stalling during a right-angle turn: 1. In the right-angle turn test item: Stalling causes the vehicle to stop midway, directly deducting 100 points (a vehicle stopping for more than 2 seconds will be judged as stopping midway). 2. Additional information: The main trick to avoid point deductions for crossing the line during a right-angle turn: Before turning, try to drive as close to the outer side as possible. When the front of the car is about to reach the opposite sideline, look ahead while also observing the rearview mirror. When you feel the middle of the car is about to pass the vertex of the right angle, slowly adjust the steering wheel back, then gradually correct the car's direction. Based on the speed (preferably in first gear with half-clutch), be decisive and even when turning (or adjusting) the steering wheel, avoiding sudden or jerky movements.
5
5
Share

What should be noted when a car breaks down on the highway?

Here are the precautions to take when a car breaks down on the highway: 1. Turn on the lights and set up warning signs: If the vehicle cannot leave the driving lane due to a malfunction, the hazard warning flashers must be turned on immediately, and a warning sign should be placed 150 meters behind the vehicle. At night, the width marker lights and taillights should also be turned on simultaneously. 2. Pay attention to avoiding danger: The driver should remain vigilant. Once a dangerous situation is detected, emergency avoidance measures should be taken immediately by moving to the safe area on the shoulder outside the guardrail. 3. Return to the driving lane: After the car is repaired and needs to return to the driving lane, the speed should be increased on the emergency parking lane first, and the left turn signal should be turned on before entering the driving lane, ensuring that it does not hinder other normally moving vehicles.
9
4
Share

What to Do If You Can't Schedule the Driving Test on Driving Test 123?

Here are the relevant explanations for being unable to schedule the test on Driving Test 123: 1. Not registered: If you haven't registered an account on the Traffic Management Bureau's website, you need to register an account using your ID card before you can normally schedule the test, or you can ask your coach to help you schedule it directly. 2. Register and schedule at the Vehicle Management Office: The Vehicle Management Office publicly announces the test arrangement plans online. Candidates can independently register and schedule the test through the internet, phone, or the service window of the Vehicle Management Office, choosing the test date and session. The system will automatically and fairly calculate the candidate's ranking based on factors such as the candidate's last test time and the date of the scheduling application, ensuring the candidate's right to schedule the test and promoting the integrity and fairness of the driving test. The platform will also connect with motor vehicle inspection agencies to facilitate car owners in scheduling the time and location of vehicle inspections in advance.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.