What is the fuel consumption of the BMW 4 Series?

1 Answers
McJeremiah
07/30/25 6:18am
The officially provided combined fuel consumption (L/100km) is 6-7.7L/100km, while feedback from netizens varies significantly, with an average around 9L/100km. Calculating car fuel consumption: It is based on the fuel consumed per 100 kilometers (usually referring to 100 kilometers). One method is to fill up the fuel tank, note the mileage (the vehicle can also record it automatically), run until half the fuel is consumed, then refill the tank. Before refueling, check the mileage to see how many kilometers have been driven, then divide the distance traveled by the amount of fuel added. Engine oil function: Engine oil is to a car what blood is to the human body, with the engine being the heart of the car. During engine operation, piston movement generates friction, gasoline combusts in the cylinders, and temperatures inside the engine can reach up to 600 degrees Celsius, also producing metal particles and other waste from friction. Therefore, manufacturers recommend timely and scientific replacement of engine oil. It is important to remind everyone that in poor road conditions such as suburban and mountainous areas, the car's corresponding oil change cycle needs to be shortened.
Was this review help?
4
3
Share
More Forum Discussions

How often should the transmission fluid be changed in a Trumpchi GS4?

Generally, transmission fluid should be inspected and replaced every 40,000 kilometers or within 2 years. Below are some relevant details about transmission fluid replacement: 1. For the Trumpchi GS4, whether the transmission fluid needs to be changed can be determined based on the operating condition of the vehicle's transmission. If the gear shifts smoothly and there is no significant change in transmission noise, replacement may not be necessary. However, if the gear shifting feels rough, especially when the driving speed exceeds 100 kilometers per hour and the transmission noise increases noticeably, it may be time to consider changing the transmission fluid. 2. Manual transmission fluid primarily serves a lubrication function due to the relatively simple internal structure, lower precision, and mature technology of manual transmissions. For most household vehicles, manual transmission fluid should be replaced approximately every 3 years or 100,000 kilometers. 3. If the transmission fluid is not changed for an extended period, the oil can deteriorate, leading to excessively high temperatures during transmission operation. Prolonged operation under high temperatures can cause the fluid to degrade and evaporate, thereby accelerating the wear of mechanical components and potentially causing severe damage to internal transmission parts.
15
3
Share

Which company's engine is used in the Haima 8S?

The engine in the Haima 8S is jointly developed by German FEV and Haima. Here are more details about the engine: 1. The engine model is HMAGA16-YF. The actual displacement of the HMAGA16-YF engine is 1594ml, with a turbocharged intake system, four cylinders arranged in an L configuration. The engine reaches its maximum power at 5000 rpm and maximum torque at 4500 rpm, featuring a DOHC valve train. The HMAGA16-YF engine recommends the use of 92-octane gasoline and employs direct fuel injection. 2. The HMAGA16-YF engine has a maximum output power of 143 kW and a maximum torque of 293 Nm, with a 0-100 km/h acceleration time of 7.8 seconds. The combined fuel consumption as published by the MIIT is 6.9L per 100 km.
5
5
Share

Does a newly replaced clutch disc require a break-in period?

After replacing the clutch disc, only about 500 kilometers of break-in is needed. Some clutch discs do not require a break-in period. Here is some information about break-in: 1. The break-in period generally refers to the process where mechanical components come into contact, friction, and meshing during initial operation. In modern usage, it often describes the time period during which two things or internal operations of an organization become familiar with and adapt to each other. 2. Break-in is also known as running-in. The break-in period for a car refers to the initial driving phase of a new car or after a major overhaul, typically 1000~1500 kilometers. This is the basic mileage required to ensure that mechanical parts fully contact, friction, adapt, and stabilize. During this period, the ability of various car components to adapt to the environment can be adjusted and improved, and protrusions on the parts can be worn down. The break-in of a car will have a significant impact on its lifespan, safety, and fuel efficiency.
7
1
Share

How to turn off the navigation in Mercedes-Benz e200?

Mercedes-Benz e200 navigation can be turned off as follows: There is a volume adjustment knob next to the navigation, and there is a button on the top of the knob. Press this button for three seconds to turn it off. The car navigation needs to be turned off in time after use. If the navigation is not turned off just for convenience, it may damage the electronic components over time. Here is an introduction to the Mercedes-Benz e200 navigation: 1. The navigation has the GPS global satellite positioning system function. After turning on the car navigation, just enter the destination in the navigation system, and the system will automatically calculate the most suitable route based on the electronic map and remind the driver during the journey according to the calculated route. 2. The car navigation can not only provide the driving route but also query nearby gas stations, hotels, banks, etc. around you or a certain location. 3. The navigation also includes a DVD player, radio reception, Bluetooth hands-free, touch screen, optional functions, intelligent trajectory reversing, and tire pressure detection function.
20
5
Share

What Are the Functions of Car Polishing?

Here are the functions of car polishing: 1. Used to reduce the surface roughness of the car, obtaining a bright and smooth surface. 2. Removes issues affecting the paint appearance, such as the oxidized layer on the paint surface, shallow scratches, and loss of gloss caused by oxidation. Here are methods for polishing different car problems: 1. Defect Removal: Spray a small amount of water on the paint surface, use P1500 pyramid sandpaper with a dry grinder to sand the entire surface once in each direction (up, down, left, right) until the paint surface becomes matte. After sanding, use a rubber squeegee to remove the white foam on the surface, observe the paint surface to identify prominent defects, then spray a small amount of water on the sanding disc to remove the defects. 2. Over-Sanded Paint Surface: Use a dry grinder with P3000 pyramid sanding disc and a dry sanding soft pad to sand the over-sanded paint surface. Spray a certain amount of water on the disc and paint surface, then sand the entire surface twice in each direction (up, down, left, right) at a faster speed. After sanding, use a rubber squeegee to remove surface water and white foam. Quality Standard: The paint surface should have no defects such as oxidation layers or scratches. 3. Coarse Wax Polishing: Further remove sandpaper marks after sanding to restore the paint surface's smoothness and initial gloss. Apply wax evenly on a certain area of the paint surface, with the polisher speed controlled between 1200-2000 RPM. Initially, apply medium-high pressure to the polishing pad and polish the paint surface evenly. Observe the paint surface, and once the sandpaper marks are noticeably removed, reduce the pressure to remove wax marks and restore some gloss to the paint surface. After polishing, use a microfiber cloth to clean residual coarse wax and dust from the paint surface.
6
3
Share

How to Turn on the Headlights of Volkswagen Lavida?

Correct method to turn on the headlights of Volkswagen Lavida: Rotate the left light control switch forward twice for low beam, mainly used for urban night driving. Push the light control lever forward once for high beam, used for driving on roads outside urban areas at night. Below are the methods to turn on other lights of Volkswagen Lavida: 1. Rotate the left light control switch forward one notch for parking lights, also known as position lights, which can display the vehicle width and illuminate the dashboard for easier operation when it's about to get dark. 2. Lift the light control lever forward once for the right turn signal, and push it downward to the left once for the left turn signal, used for changing directions. The lever will automatically reset when the vehicle is straightened. 3. For alternating between low and high beams, pull the light control lever backward and upward (release quickly after pulling). This has two main purposes: a) To alert oncoming vehicles when driving outside urban areas at night, reminding them to stay in their lane and avoid occupying the opposite lane; b) To signal the vehicle ahead when preparing to overtake. 4. Between the dashboard and the front passenger panel, there are two light control switches. One is for the fog light, used during foggy conditions. The other is for the hazard warning lights, which, when activated, cause all four turn signals to flash simultaneously. This is used when entering hazardous areas or during adverse weather conditions to alert others to maintain a safe distance and avoid overtaking.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.