What is the fuel consumption of the Big Dog 2.0T?

1 Answers
WestonLynn
07/29/25 10:57pm
Haval Big Dog 2.0T fuel consumption is 9.7~10L/100km. Below are specific details about the Haval Big Dog: 1. Dimensions: The Haval Big Dog has a body size of 4620mm in length, 1890mm in width, and 1780mm in height, with a wheelbase of 2738mm. The Haval Big Dog is a compact SUV from Haval, featuring a five-door, five-seat configuration. 2. Configuration: The Haval Big Dog uses a MacPherson independent suspension for the front and a multi-link independent suspension for the rear. The entire lineup of the Haval Big Dog is equipped with a 1.5-liter turbocharged engine, coded GW4B15A. This engine has a maximum power of 127.4kW and a maximum torque of 285Nm. It features CVVL technology and direct fuel injection, with an aluminum alloy cylinder head and block. The engine is paired with a 7-speed dual-clutch transmission.
Was this review help?
2
1
Share
More Forum Discussions

What are the speed limit regulations for urban lanes?

Motor vehicles driving on the road must not exceed the speed indicated by speed limit signs or markings; for urban roads with two or more motor vehicle lanes in the same direction and without speed limit signs or markings, the maximum speed is 70 km/h, while for closed motor vehicle-only roads and highways, the maximum speed is 80 km/h. Highway speed regulations: The speed of small passenger vehicles must not exceed 120 km/h, other motor vehicles must not exceed 100 km/h, motorcycles must not exceed 80 km/h, and must not be lower than 60 km/h. Traffic light speed regulations: There is no speed limit when approaching traffic lights or pedestrian crossings, but the speed must not exceed the road's speed limit; if the traffic lights are at road intersections or turns, the speed must not exceed 30 km/h. Generally, it should be between 30 to 60 km/h.
8
3
Share

What is the capacity of a plastic oil drum in liters?

The standard capacity of a plastic oil drum is 200 liters. Oil drums, which are barrels used for storing oil, are mostly made of iron or plastic in a cylindrical shape. The 200L oil drum sealer (crimping pliers) is specifically designed for sealing the internationally standard 200-liter (53-gallon) large-capacity oil drums. It has a diameter of 80 cm and a height of 120 cm. Originally, petroleum transactions were mostly conducted in barrels. Materials of plastic oil drums: Plastic drums are mainly made of polyethylene, polypropylene, and other plastics through blow molding or injection molding. They are used in industries such as chemical, pesticide, pharmaceutical, food, hardware electronics, and electromechanical for the outer packaging of liquid and solid items. Cleaning methods for plastic oil drums: You can use baking soda for cleaning: Baking soda powder, as a natural cleaning agent, has excellent cleaning effects and is healthier than chemical cleaners. You can put baking soda into the plastic oil drum and then add hot water.
12
5
Share

What are the requirements for adding a driving license?

The requirements for adding different types of vehicles vary. For upgrading from a C1 to a B1 license, the conditions include holding a C1 license for at least 3 years, being between 21 and 50 years old, having no full-point penalty records in the last 3 scoring cycles before application, and ensuring consistency in information such as ID card, driver's license, and address. Precautions for adding a driving license: During the process of adding a driving license, the vehicle types permitted by the original license can still be driven normally. However, in the following situations, it will be penalized as driving without a license: the original license is still valid, but driving a vehicle beyond the permitted level; driving when the original license has been revoked but the new one has not yet been obtained. New regulations for adding a driving license: Persons who have caused a traffic accident resulting in death and bear equal or greater responsibility, or those who have driven under the influence of alcohol; persons whose licenses have been revoked, or whose motor vehicle driving licenses have been revoked for less than ten years, are not allowed to add a license. In addition, corresponding physical conditions must be met.
12
0
Share

Can I turn on the air conditioning immediately after starting the car in summer?

It is not recommended to turn on the air conditioning immediately after starting the car in summer. Here is the relevant information: Reasons not to turn on the air conditioning: It is not advisable to turn on the air conditioning right after starting the car, as this will increase the load on the engine when it has just started, leading to higher fuel consumption. After the engine is running normally, it can better support the operation of the air conditioning compressor. Best practice: Open the doors or windows to allow air circulation for a while before starting the car, then wait about a minute before turning on the air conditioning. In summer, it is generally better to turn on the air conditioning after the car has started moving.
20
5
Share

What are the structures of a motorcycle carburetor?

A simple carburetor consists of three parts: upper, middle, and lower. The upper part includes the air intake and float chamber, the middle part has the venturi, jet, and spray tube, and the lower part includes the throttle valve. Function of the carburetor: The carburetor mixes air and gasoline in the correct proportion to provide combustion power for the cylinder. The carburetor has a throttle piston that moves up and down to control the amount of air intake. A needle valve passes through the main fuel jet in the middle of the throttle piston. The up and down movement of the throttle piston simultaneously drives the needle valve to control the fuel quantity. When the throttle is applied, the throttle cable drives this throttle piston to move up and down, providing combustion power to the cylinder and controlling the engine speed. Working process of the carburetor: The carburetor is a mechanical device that mixes a certain proportion of gasoline with air under the vacuum generated by the engine's operation. Essentially, it atomizes the gasoline and mixes it with air.
6
0
Share

What is the appropriate torque for a motorcycle oil drain bolt?

Motorcycle oil drain bolt torque is generally 22N-27N for cast iron oil pans and 15N-22N for all-aluminum oil pans. Motorcycle oil draining method: Open the waste oil pipe screw at the bottom of the carburetor, pull out the oil pipe connected to the carburetor, connect a section of pipe, and use a bottle to catch the oil. Precautions for motorcycle oil draining: When draining gasoline from the fuel tank, it should be stored in a sealed container. Otherwise, the "light components" in the gasoline will decrease over time, causing difficulty or failure in starting the motorcycle. At the same time, the gasoline in the carburetor should also be completely drained to prevent impurities in the gasoline from clogging the carburetor's metering holes, oil passages, and other components.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.