What is the fuel consumption of the Big Dog 2.0t?

1 Answers
Thaddeus
07/24/25 9:45pm
The fuel consumption of the Haval Big Dog 2.0t is 9.7~10L/100km. Below are the specific details about the Haval Big Dog: Dimensions: The Haval Big Dog has a body size of 4620mm in length, 1890mm in width, and 1780mm in height, with a wheelbase of 2738mm. The Haval Big Dog is a compact SUV under the Haval brand, featuring a five-door, five-seat configuration. Configuration: The Haval Big Dog uses a MacPherson independent suspension for the front and a multi-link independent suspension for the rear. The Haval Big Dog is equipped with a 1.5L turbocharged engine across the lineup, with the engine code GW4B15A. This engine delivers a maximum power of 1274kW and a maximum torque of 285Nm. It incorporates CVVL technology and direct fuel injection, along with an aluminum alloy cylinder head and block. The engine is paired with a 7-speed dual-clutch transmission.
Was this review help?
4
5
Share
More Forum Discussions

How to turn on the air conditioning in the Q5?

Method to turn on the air conditioning in the Q5: 1. After starting the car, wait for 8 to 15 minutes until the water temperature rises to the normal level, then turn the air conditioning knob to activate the air conditioning; 2. Adjust the air circulation mode to internal circulation; 3. Press the AUTO button to activate the air conditioning, which will automatically adjust the interior temperature; 4. Press the AC button to enter the temperature setting mode, where you need to manually set the desired temperature; 5. Select the air outlet angle. The Q5 perfectly combines the body design of a sports car, efficient power and responsive handling, the off-road safety performance of an SUV, and the excellent comfort and flexible interior space of a station wagon. The powerful green-efficient engine, quattro all-wheel-drive system, and responsive driving mechanism make it effortless whether driving on highways or off-road.
20
1
Share

Should the Handbrake Be Engaged for Long-Term Parking with an Automatic Transmission?

When parking on a flat surface, it is acceptable not to engage the handbrake, but it is necessary to do so on a slope. Below are some important considerations for parking with an automatic transmission: 1. Do not engage the mechanical handbrake too tightly: Avoid pulling the mechanical handbrake too tightly, as over time this can cause the handbrake to become loose or the cable to snap. 2. Try to avoid long-term parking on slopes: Prolonged parking on a slope with the handbrake engaged can lead to wear on the handbrake cable. If long-term parking on a slope is unavoidable, after engaging the handbrake, placing a brick on the side facing the bottom of the slope can help secure the vehicle and reduce pressure on the handbrake. 3. Park on a level surface: Always try to park on a level surface, avoiding contact with curbs or parking space limiters.
2
0
Share

What Causes an Automatic Transmission Car to Stall When Reversing?

The reason for an automatic transmission car stalling when reversing may be due to electrical circuit failure, excessive carbon buildup in the fuel injector and spark plugs, or circuit issues. Causes of stalling when reversing: During driving, stalling can occur due to low-voltage power failure, excessive carbon buildup in the spark plugs causing unstable ignition leading to occasional stalling, or severe engine operation conditions caused by excessive carbon buildup in components like the throttle body and fuel injector, making the car prone to stalling at low speeds. Automotive electrical circuit failure: Electrical circuit failure refers to stalling during driving due to low-voltage power failure. In such cases, you should primarily check the ignition and starter switch, as well as the fuse box. Stalling caused by a short circuit in the low-voltage circuit results in intermittent stalling. Inspect the low-voltage circuit for any component failures.
4
4
Share

What Causes the Purge Pump to Fail?

Generally, damage to the purge pump involves a malfunction of the internal motor, which requires professional repair. Additionally, a missing phase in a three-phase power supply can also cause burnout. Below are the impacts of a failed purge pump: 1. Reduced Vehicle Power: A damaged purge pump prevents fuel vapor from the charcoal canister from entering the cylinder, leading to a lower concentration of the combustible air-fuel mixture in the engine, which results in decreased vehicle power output. 2. Increased Fuel Consumption: If the charcoal canister is saturated with fuel vapor but the purge pump fails to expel it, subsequent fuel vapor cannot be recycled, naturally leading to higher vehicle fuel consumption. 3. Environmental Pollution: A damaged purge pump causes fuel vapor to be directly emitted into the atmosphere (as the charcoal canister is already full), making the vehicle's exhaust noticeably smell of gasoline.
10
2
Share

What Causes Excessive Engine Oil Temperature in BMW 5 Series?

If the engine oil temperature becomes too high, you can replace the engine oil cooler, as the excessive temperature may be caused by poor performance of the oil cooler. When the engine oil temperature is too high, it must be repaired immediately; otherwise, it will affect the normal operation of the engine. More information about engine oil is as follows: 1. Introduction: Engine oil is referred to as the lifeblood of the engine. Without engine oil, the engine cannot function properly. During engine operation, the oil forms a thin film on the surfaces of various engine components, preventing excessive friction and heat generation. 2. Replacement: Regularly change the engine oil during vehicle use. Each time the engine oil is replaced, the oil filter should also be replaced. The oil filter is responsible for filtering the engine oil. Without this component, the oil would become dirty over time, which could impair the engine's normal operation.
13
5
Share

How to Replace the C200 Key Battery?

Method for replacing the C200 key battery: There is a button on the back of the key. Press this button and push the back cover of the key forward to open it. The battery is located in the adjacent slot. Pry open this slot, remove the old battery, and replace it. During the replacement process, it is crucial to pay attention to the battery model. Most C200 key batteries use the 3V CR2025 model. In terms of exterior design, the C200 features polygonal headlights equipped with eagle-hook-style LED daytime running lights. The front grille adopts a trapezoidal design with a starry mesh pattern, complemented by a sporty front bumper, giving the overall design a more youthful appeal. Regarding the powertrain, the C200 is equipped with three different engine options, including a 1.5T inline-four (model 254915), a 1.5T inline-four with 48V mild-hybrid system, and a 2.0T inline-four (model 254920).
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.