What is the fuel consumption of the Beidou Star x5?

1 Answers
JuliaLynn
07/29/25 6:33pm
1.0 displacement is about 6L per 100 kilometers, and 1.4 displacement is about 6.4L per 100 kilometers. The following are the factors that affect fuel consumption: 1. Whether the air conditioning is used; 2. Driving conditions, the most fuel-efficient when driving at a constant speed and economic RPM; 3. Vehicle weight, the lighter the more fuel-efficient; 4. Electricity consumption, the more electricity used, the greater the magnetic resistance of the generator; 5. Driving habits; 6. Engine temperature, the best is around 70 degrees. When too low, the viscosity of the engine oil is high, and lubrication is poor. When too high, the adhesion of the engine oil is poor, the lubrication degree decreases, and the cooling fan consumes electricity and then fuel; 7. Engine oil performance; 8. Tire resistance, wide tires have greater resistance, and resistance also increases when the tire is underinflated; 9. Aerodynamics of the vehicle design; 10. Vehicle age.
Was this review help?
8
4
Share
More Forum Discussions

What Temperature Rating Should Winter Windshield Washer Fluid Have?

Windshield washer fluid is generally categorized into 0℃ fluid for summer use and -20℃ or -35℃ fluid for winter use. The appropriate temperature rating should be selected based on the season. In winter, the antifreeze performance should be the primary criterion for selection, and you should choose a fluid with a freezing point at least 10℃ below the local minimum temperature. Otherwise, when temperatures drop in winter, the fluid may freeze and become unusable, leading to issues such as failure of the washer fluid pump. Here are some precautions for using windshield washer fluid: 1. In winter, always drain the existing fluid completely before refilling with antifreeze washer fluid. 2. You can add water to the washer fluid reservoir, but the cleaning effect will be far inferior to that of proper washer fluid. Additionally, water does not provide any protection for the wiper blades. 3. If adding water to the washer fluid, use tap water rather than river water, as sediment from river water can clog the pump. However, regular tap water also contains impurities, which can accumulate in the rubber hoses over time and affect normal spray performance. 4. Summer and winter windshield washer fluids should not be mixed. Diluting the fluid will reduce its antifreeze performance.
20
1
Share

What Causes Automatic Transmission Jerking?

After changing the transmission fluid, the reason for jerking is using oil that does not match the car's transmission or incorrect methods of replacing the transmission fluid. Methods for replacing transmission fluid: There are mainly two methods for replacing transmission fluid. The first method is similar to changing engine oil, known as the gravity drain method. The second method is using a circulation machine to replace the fluid. Transmission fluid: Transmission fluid plays a crucial role in lubrication, cleaning, and cooling for the transmission. However, after being used for a period, the effectiveness of the transmission fluid diminishes. Not replacing it for a long time can cause damage to the transmission, so it is necessary to change it regularly.
7
3
Share

Is the trunk of a sedan ventilated?

Car trunks have ventilation, but the airflow is minimal. Below is additional information on trunk usage: 1. Do not store flammable or explosive items: Neither the cabin nor the trunk should contain flammable or explosive materials. In hot weather, a parked car exposed to sunlight can reach internal temperatures of 60-70 degrees Celsius, which may cause such items to spontaneously combust. Additionally, collisions during driving could also lead to spontaneous combustion of these items. 2. Avoid overloading the trunk: Carrying excessive items in the trunk may result in penalties, as traffic police cannot determine whether the transport is illegal. 3. Do not store valuables: Keeping valuables in the trunk is unsafe. Thieves can easily access them. Since the trunk is connected to the second row of seats, breaking a window allows thieves to reach into the trunk from the second row.
10
4
Share

How Long Does It Take to Detect a Red Light Violation?

After running a red light, the violation notification SMS is usually received within 3 to 7 days, with a maximum delay of around 13 days. However, some cities now offer "instant electronic police capture alerts," where you may receive an SMS notification within 5-10 minutes of being captured. Note that this alert does not confirm a violation; it merely serves as a capture notification. The final determination of whether a violation occurred takes 3-7 days. If a violation is confirmed, you will receive another SMS notification. For violations captured by surveillance cameras, vehicle owners typically do not receive an immediate notification. There is usually a delay, which can vary in length. After an electronic camera captures a violation, the relevant information must be transmitted through a dedicated channel to the traffic police management center. It is then compiled and forwarded to the relevant traffic police personnel for verification. If confirmed as a violation, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via SMS. After receiving the violation SMS, the vehicle owner must address the issue at the local traffic police department within one month before the vehicle's annual inspection. If you suspect a violation but have not received an SMS within 15 days, it is likely that no violation was recorded. Traffic Violation Query Methods: Traffic violation queries refer to checking vehicle violations of traffic regulations through online platforms or query terminals. There are five main methods: traffic branch terminal queries, vehicle violation website queries, phone queries, SMS queries, and mobile app queries. Website Query: Search for "vehicle violation query" and enter your vehicle details. Phone Query: Dial local 114 (area code + 114) or 12580 to confirm traffic violations. Violations can only be processed at the location where they occurred or where the vehicle is registered. For on-the-spot violations (e.g., those caught directly by traffic police), they must be handled at the violation location. SMS Query: Open your phone's messaging app, compose a message with "WZ [license plate number] [plate color]," and send it to 1062650001. Mobile App Query: Open the "Traffic Management 12123" app, select "Violation Query," and clear any unresolved violations.
20
5
Share

What Are the Causes of Car Drifting?

Car drifting can be caused by the following reasons: 1. Uneven tire pressure; Uneven tire pressure, mainly caused by inconsistent tire pressure in the drive wheels, can lead to different levels of wear between the drive wheels and the ground. Different friction levels can directly cause drifting. 2. Abnormalities in the car's steering system; Abnormalities in the car's steering system can also result in drifting. For example, bending or deformation of the steering knuckle arm or steering knuckle usually causes the car to drift in one direction. The most severe case is when the tie rod ends are severely worn and become loose, leading to steering failure, which can cause the car to lose control completely. 3. Different tread patterns on the wheels or uneven tire wear on both sides. Using tires with different tread patterns or uneven wear on both sides can create different friction levels between the tires and the ground, leading to drifting during braking. If drifting is noticed while driving, it is advisable to stop and inspect the car immediately if conditions permit. If stopping is not immediately possible, find a safe place to park as soon as possible.
10
3
Share

What are the differences between Mazda 3 and Mazda 6?

1. Different body dimensions: Mazda 3: Model dimensions length 4515mm, width 1745mm, height 1465mm. Mazda 6: Model dimensions length 4670mm, width 1780mm, height 1435mm. 2. Different suspension types: Mazda 3: Front suspension: MacPherson strut independent front suspension system, rear suspension: multi-link rear suspension system. Mazda 6: Front suspension: High-mounted double wishbone independent suspension, with shock absorbers and coil springs arranged coaxially; rear suspension: E-type multi-link suspension. 3. Different engines: Mazda 3: Domestically assembled with a 1.6-liter gasoline engine as the main option. Mazda 6: Mazda 6 will be equipped with two engines: a 2.0-liter and a 2.3-liter inline four-cylinder engine. The 2.3-liter four-cylinder engine will utilize Sequential Valve Timing (S-VT) and Variable Valve Timing (VVT) technologies. These technologies can significantly enhance engine power, output more torque and greater power; they can also improve fuel economy and reduce exhaust emissions.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.