What is the fuel consumption of the Baojun 310?

2 Answers
LunaLee
07/29/25 4:40am
Baojun 310 has 4 models on sale, including the 2020 1.2L manual luxury, value, fashion, and comfort models, all equipped with an 80-horsepower engine. The NEDC fuel consumption is 5.1L per 100 km, which is the official data. The fuel tank capacity of the Baojun 310 is 30L. A full tank can run for 30/5.1*100=588 km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. The specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, will increase fuel consumption. The car itself: Cars with larger displacements consume more fuel than those with smaller displacements because larger displacements generally mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Dirt roads, muddy roads, soft surfaces, and mountainous roads increase resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine computer controls higher RPMs to warm up the car, which also increases fuel consumption.
Was this review help?
4
1
Share
StErin
08/12/25 8:21am
I previously drove the Baojun 310, and I found its fuel consumption quite economical, averaging around 5.5 liters per 100 kilometers. In city driving with frequent stops and starts, it could rise to a little over 6 liters during traffic jams; on the highway, driving steadily could bring it down to around 4.8 liters. I have good driving habits—no sudden acceleration or braking, maintaining a steady speed whenever possible—which helps save a lot of fuel. The car's engine is small-displacement, inherently fuel-efficient, and combined with its lightweight body design, it’s much more economical than larger vehicles. Maintenance is also crucial; regular oil changes and tire pressure checks help keep fuel consumption stable. Overall, this car is perfect for daily commuting, with monthly fuel costs just a few hundred yuan—both cost-effective and hassle-free.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

What are the reasons for abnormal noise from newly replaced brake pads?

The reasons for abnormal noise from newly replaced brake pads are: 1. Abnormal noise when braking: caused by wear between the brake pads and brake discs. The old brake pads and discs have been used together for a long time, forming a complementary shape. When new brake pads are installed, the edges of the pads may not make even contact with the discs, leading to friction and noise; 2. Issues with brake pad material: if non-standard brake pads are used, the larger particles in the material can easily cause noise when braking; 3. Installation problems: such as not applying lubricant or improperly installed brake pad shims; 4. Brake caliper not retracting properly: check if the brake caliper can retract normally, and replace it promptly if it cannot.
20
4
Share

What are the symptoms of a damaged car shock absorber top mount?

The symptoms of a damaged car shock absorber top mount include: 1. Reduced comfort, with particularly noticeable thumping sounds when going over bumps and speed bumps; 2. Increased tire noise, with severe cases producing a roaring sound; 3. The steering wheel being misaligned during straight-line driving, and the car not moving straight when the wheel is centered; 4. Squeaking sounds when turning the wheel while stationary, with severe cases also felt through the steering wheel; 5. Severe damage can affect the service life of the shock absorber. The car's shock absorber, also known as the suspension, is composed of both a spring and a shock absorber. The shock absorber is not used to support the vehicle's weight but rather to dampen the oscillations from the spring's rebound after absorbing shocks and to absorb the energy from road impacts.
2
0
Share

What is the wheelbase of the Great Wall Haval M4?

The wheelbase of the Great Wall Haval M4 is 2383mm. The vehicle's length, width, and height are 3961mm, 1728mm, and 1617mm respectively. It is equipped with a 1.5-liter naturally aspirated four-cylinder engine across the lineup, delivering a maximum power of 78kW and a maximum torque of 138Nm. It is paired with either a 5-speed manual transmission or a 6-speed AMT transmission. The Haval M4 is a rugged compact SUV under the Great Wall brand, featuring a ground clearance of 185mm. It has a MacPherson strut front suspension and a longitudinal trailing arm composite rear suspension, with aluminum alloy wheels.
14
4
Share

Where is the engine of GAC Trumpchi GS3 produced?

GAC Trumpchi GS3's engine is independently developed and produced by GAC Motor Co., Ltd. In terms of power, it is equipped with two engines: a 1.5L and a 1.3T, with maximum power outputs of 84kw and 101kw respectively, and peak torques of 150nm and 202nm. The engines are paired with an Aisin 6-speed automatic transmission, while the 1.5L model also offers a manual transmission option. The Trumpchi GS3 is a compact SUV under the GAC Trumpchi brand, with body dimensions of 4350mm in length, 1825mm in width, and 1655mm in height, and a wheelbase of 2560mm.
15
4
Share

What is the best engine oil for Audi Q7?

Audi Q7 originally uses 0W30 fully synthetic engine oil. For later maintenance, you can also use Castrol EDGE 0W30. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under low and high temperature conditions. For example, in 5W-30, the first number indicates low-temperature fluidity, where 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. The higher this value, the better the oil can maintain its viscosity index at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in an Audi Q7 is as follows: Wait for the engine temperature to drop, and also allow the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug, and use an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; Apply some oil to the oil seal of the new oil filter, and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine valve cover, usually filling about three-quarters of the oil container; Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check if the engine oil level is within the standard range.
12
2
Share

What is the original tire brand of the Jaguar XFL?

Jaguar XFL's original tire brand is Pirelli. Introduction to Pirelli tires: Pirelli tires are products of the Italian company Pirelli. Pirelli, one of the world's most renowned tire companies, was founded in Italy in 1872 and is currently the fifth-largest tire manufacturer globally, with 24 factories worldwide. Functions of tires: Support the entire weight of the vehicle, bear the vehicle load, and transmit forces and moments in other directions; transmit traction and braking torque to ensure good adhesion between the wheels and the road surface, improving the vehicle's power performance, braking performance, and passability; work with the vehicle suspension to mitigate impacts during driving and dampen resulting vibrations; prevent severe vibrations and early damage to vehicle components, adapt to high-speed performance and reduce driving noise, ensuring driving safety, handling stability, comfort, and energy efficiency.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.