···
Log in / Register

What is the fuel consumption of the automatic Hyundai Elantra?

4 Answers
EvangelineRose
07/29/25 3:38pm

The fuel consumption of the automatic Hyundai Elantra is 7.1 liters per 100 kilometers. Introduction to fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the amount of fuel consumed by a vehicle traveling a distance of 100 kilometers at a certain speed on the road. It is a theoretical indicator for vehicles. The fuel consumption per 100 kilometers is measured by manufacturers under controlled conditions using a dynamometer installed on the vehicle's chassis. The measured values are converted into speed parameters, and then the vehicle is driven at specified speeds to calculate the theoretical experimental fuel consumption data per 100 kilometers. Calculation method for fuel consumption per 100 kilometers: Calculation method: (Fuel cost ÷ Fuel price) ÷ Distance traveled in kilometers × 100 = Fuel consumption (liters). Most vehicles nowadays display the fuel consumption per 100 kilometers.

Was this review help?
14
3
Share
VanFelicity
08/14/25 9:26am

I drive a Hyundai Elantra automatic transmission, which I've had for three years now, mainly using it for commuting and weekend trips. In the city, due to frequent traffic jams, the fuel consumption can reach 8-9 liters per 100 kilometers; on the highway, it's much lower, around 5-6 liters. On average, based on my records, 7.5 liters per 100 kilometers is typical. However, this is influenced by many habits. By maintaining a speed between 60-80 km/h and avoiding sudden braking, I can save a few hundred yuan in fuel costs each year. Additionally, the weather plays a role—fuel consumption is higher in summer with the air conditioning on, while it's more stable in winter. I believe regularly checking tire pressure and avoiding heavy loads in the car are very helpful in maintaining low fuel consumption. These small details together can make your driving more economical and worry-free.

Was this review help?
14
0
Share
Expand All
SanCassidy
10/12/25 2:57am

I enjoy studying automotive technology in my spare time. The Hyundai Elantra automatic model features a CVT transmission paired with a 1.6L engine design, which is considered quite efficient among its peers. According to official data and test reports, its average fuel consumption ranges between 7-8 liters per 100 kilometers, with urban driving conditions potentially reaching around 8.5 liters. In actual driving, the smooth gear shifts of the transmission reduce energy loss, but it's important to be mindful of driving conditions such as mountainous roads or headwinds, which can increase fuel consumption. I recommend that owners pay attention to tire pressure maintenance and regular engine air filter replacements, as these can optimize fuel efficiency. In the long run, this car offers good economy – a full tank can easily cover over 500 kilometers, making it very practical for daily commuting.

Was this review help?
18
4
Share
Expand All
VanKarter
11/25/25 4:01am

As a new driver who just bought an Elantra automatic, I'm very concerned about fuel consumption. According to the manual, the official average fuel consumption is 7.8L/100km, and my actual measurement in urban driving is around 8L. For beginners, gentle acceleration and avoiding sudden throttle inputs can save fuel. You can use apps to record fuel refills and mileage to estimate your actual consumption. Understanding road conditions helps too - for example, fuel consumption can drop below 6L on flat highways. Overall, this fuel efficiency is quite reasonable for family use, and proper maintenance will ensure long-term efficiency.

Was this review help?
6
0
Share
Expand All
More Forum Discussions

What is the Ferrari logo?

The Ferrari logo is a prancing horse. Ferrari models include: Ferrari 488, Ferrari 812, Ferrari 458, Ferrari LaFerrari, Ferrari F8, etc. Taking the 2019 Ferrari 488 as an example, it is a sports car with body dimensions of: length 4605mm, width 1975mm, height 1206mm, wheelbase of 2650mm, and a fuel tank capacity of 78l. The 2019 Ferrari 488 is equipped with a 3.9l twin-turbocharged engine, with a maximum horsepower of 720ps and a maximum power speed of 8000rpm per minute.
18
5
Share

What are the reasons for the car engine warning light staying on?

The reasons for the car engine warning light staying on are: 1. Poor gasoline quality leading to incomplete combustion of the air-fuel mixture in the cylinders, resulting in carbon deposits; 2. Excessive engine mileage causing weakened spark plug performance; 3. Mechanical aging of the vehicle; 4. Damage, poor contact, or signal interruption of components such as water temperature sensor, crankshaft position sensor, air flow sensor, intake air temperature sensor, and oxygen sensor. The solutions for a continuously illuminated engine warning light are: 1. Promptly inspect the engine condition; 2. Check the status of sensors including air flow sensor and spark plugs; 3. Examine the vehicle for knocking conditions; 4. Inspect the ignition coils for faults; 5. Severe engine carbon buildup.
15
4
Share

What is the installation method for vehicle license plates?

The installation method for vehicle license plates is: 1. Take out the license plate screws and rotate them into the anti-theft caps; 2. Position the license plate correctly, align the screws with the gaps on the bumper, and secure them using tools; 3. Cover and press in the anti-theft caps. The functions of license plates are: 1. Serving as vehicle identification marks; 2. Indicating the region to which the vehicle belongs; 3. Enabling the retrieval of the vehicle owner's and registration information based on the plate number. Types of license plates: 1. White represents military and police plates; 2. Blue represents ordinary small vehicles with 7 seats or fewer; 3. Yellow represents ordinary large vehicles; 4. Black represents foreign enterprise plates.
11
2
Share

What are the differences between the Sylphy Intelligent Connectivity Premium Edition and the Intelligent Connectivity Supreme Edition?

The differences between the Sylphy Intelligent Connectivity Premium Edition and the Intelligent Connectivity Supreme Edition are: 1. Different minimum ground clearance: the Sylphy Intelligent Connectivity Premium Edition has a minimum ground clearance of 165mm; the Sylphy Intelligent Connectivity Supreme Edition has a minimum ground clearance of 164mm. 2. Different curb weight: the Sylphy Intelligent Connectivity Premium Edition has a curb weight of 1236kg; the Sylphy Intelligent Connectivity Supreme Edition has a curb weight of 1255kg. Both the Sylphy Intelligent Connectivity Premium Edition and the Intelligent Connectivity Supreme Edition are equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 126ps, a maximum torque of 168nm, a maximum power of 93kw, and are matched with a CVT continuously variable transmission.
15
5
Share

What grade of gasoline does the Odyssey use?

The Odyssey requires 92-octane or higher gasoline. The higher the octane rating, the better the anti-knock performance. Taking the 2021 Odyssey as an example, it is an MPV with the following dimensions: length 4847mm, width 1820mm, height 1702mm, wheelbase 2900mm, and curb weight 1822kg. The 2021 Odyssey features MacPherson strut front suspension and torsion beam rear suspension. It is equipped with a 2.0L naturally aspirated engine delivering maximum power of 146PS, peak torque of 175Nm, and maximum output of 107kW, paired with an electronic continuously variable transmission.
4
0
Share

What lights are inspected during a vehicle inspection?

During a vehicle inspection, the following lights are checked: 1. Headlights, front position lights, front turn signals, front hazard warning lights, clearance lights, and towing trailer marker lights; 2. Rear position lights, rear turn signals, rear hazard warning lights, clearance lights, brake lights, rear fog lights, rear license plate lights, and reverse lights; 3. Side turn signals and side marker lights. Precautions for using vehicle lights include: 1. Turn on low beams when driving at night; 2. Do not use high beams when driving closely behind another vehicle in the same direction; 3. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic lights at night, alternate between high and low beams to signal.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.