···
Log in / Register

What is the fuel consumption of the Audi Q7 3.0T?

3 Answers
VonCollin
08/31/25 7:41am
Audi Q7, 3.0T official combined fuel consumption is 9.3(L/100km). Here is the relevant information: Powertrain: The new Audi Q7 is equipped with a 3.0T turbocharged V6 engine, with a maximum power of 250kW (340PS) and a peak torque of 500Nm, paired with an 8AT transmission. The new Audi Q7 also features a 48V mild hybrid system, which can continue to supply power to the vehicle's electrical systems during start-stop operation and provide additional power during acceleration. Configuration: In terms of configuration, the new Audi Q7 comes standard with front seat heating, a panoramic camera, tire pressure monitoring, Audi Virtual Cockpit, and other features. Additionally, the Audi pre-sense system is also standard across the entire lineup.
Was this review help?
8
1
Share
SanAubrey
09/13/25 3:58am
As an owner of the Q7 3.0T for over two years, my average fuel consumption is around 10 liters per 100 kilometers. In city traffic jams, it can rise above 12 liters, but it's much more economical on highways, with the lowest reaching just over 7 liters. Many factors affect fuel consumption. For example, when I use air conditioning during my commute, consumption increases by 1-2 liters; aggressive acceleration also burns more fuel; and in cold weather, the engine takes longer to warm up, leading to higher consumption. Personally, I recommend smooth starts and maintaining an economical speed to save fuel. Regular oil changes and checking tire pressure can also help. Overall, as an SUV, this fuel consumption is within my acceptable range, considering its heavy body and strong power.
Was this review help?
16
3
Share
Expand All
AustinLynn
10/27/25 4:45am
From a mechanical perspective, the Audi Q7 3.0T engine has an official combined fuel consumption rating of 9.2 liters per 100 kilometers, with actual measurements varying between 8 to 11 liters. Influencing factors include driving habits—sudden braking or rapid acceleration can increase fuel consumption by 20%; vehicle conditions such as a dirty air filter or underinflated tires can raise fuel usage by 10%; and air conditioning use in summer may add an extra 5%. It is recommended to regularly check vehicle condition and use high-quality engine oil to maintain efficiency. While actual fuel consumption is higher than that of sedans, this is normal—SUVs inherently consume more fuel due to their four-wheel-drive systems and body design, but technological optimizations like start-stop systems help control consumption.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

What is the weight of the Jetta VS5?

Jetta VS5 has a body weight of only 1355 kg. The vehicle has a relatively small body size, requiring less steel application, with the proportion of high-strength steel used in the body reaching 66%. High-strength steel not only has high tensile strength but also possesses certain weight-reducing capabilities. The main function of the car body is to protect the driver and create a good aerodynamic environment. In terms of form, automobile body structures are mainly divided into two types: body-on-frame and unibody. The following is an introduction: 1. Body-on-frame vehicles have a rigid frame: Also known as a chassis frame. The body is suspended on the frame and connected with elastic components. The vibration of the frame is transmitted to the body through the elastic components, with most vibrations being weakened or eliminated. In the event of a collision, the frame can absorb most of the impact force, protecting the body when driving on bad roads. Therefore, the deformation of the cabin is small, with good stability and safety, and low cabin noise. 2. Unibody vehicles do not have a rigid frame: Only the front, side panels, rear, floor, and other parts are reinforced. The body and frame together form a rigid spatial structure of the body. In addition to its inherent load-carrying function, this unibody structure also directly bears various loads.
6
3
Share

Why does the engine make abnormal noise when the air conditioner is turned on but not when it is turned off?

When the air conditioner is turned on, the engine makes abnormal noise, but when it is turned off, there is no noise. This may be caused by the high-speed operation of the car radiator cooling fan generating noise, wear or lack of lubricating oil in the air conditioner blower motor bearings, or looseness or aging of the air conditioner compressor belt. The specific reasons are as follows: Noise from the car radiator cooling fan: When the car fan receives the command to turn on the air conditioner, it will operate at high speed. Normally, it works when the water temperature is high, but after the air conditioner is turned on, it needs to operate continuously, which significantly increases the noise. When the fan becomes unbalanced due to dirt accumulation, the noise becomes louder, accompanied by body vibration. Wear or lack of lubricating oil in the air conditioner blower motor bearings: When the blower motor bearings are worn or lack lubricating oil, noise will also occur, usually a sharp sound. Another reason is that if the air conditioner filter is not replaced in time and becomes unbalanced due to dust accumulation, it can also cause resonance and abnormal noise. Looseness or aging of the air conditioner compressor belt: When the air conditioner is turned on, the compressor engages, increasing the load on the belt. If the belt is loose or aged, it will produce abnormal noise.
5
1
Share

What is the effect of high altitude on car tire pressure?

High-altitude areas have lower atmospheric pressure. At an altitude of 4,000 meters, the atmospheric pressure is 0.62 Bar, which is about 60% of that at sea level; at 5,000 meters, it is 54%. 2.6 Bar (sea level tire pressure) + (sea level atmospheric pressure - high altitude pressure) = actual relative tire pressure. High tire pressure: High tire pressure saves fuel and makes steering lighter, giving a feeling of improved power. Although high tire pressure has many benefits, it also has a drawback: it increases braking distance. This is because excessive tire pressure lifts the tire from what should be a flat surface, reducing the contact area and also affecting the tire tread, which reduces tire adhesion. Additionally, high tire pressure can easily cause sidewall bulges. Low tire pressure: Low tire pressure shortens braking distance and improves grip when turning, but it also has disadvantages. Low pressure makes the car consume more fuel, makes steering heavier when turning, and gives a feeling of insufficient power. Moreover, the sidewalls of most tires are very fragile. Driving with low pressure causes the tire to continuously compress and rebound, which can easily lead to tire fatigue. In this situation, the tire temperature rises relatively quickly, and when the tire temperature exceeds 80 degrees Celsius, it is very prone to blowouts.
14
2
Share

What is the length of the Land Cruiser in meters?

The length, width, and height dimensions of the Land Cruiser are 5170mm/1975mm/1930mm, 5095mm/1975mm/1930mm, and 4858mm/1847mm/1439mm, respectively. These data are official specifications. The length of the Land Cruiser refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two parallel planes aligned with the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding points on both sides. The height refers to the distance between the highest point of the vehicle and its supporting plane. The naturally aspirated engine of the Land Cruiser delivers a maximum power of 202 kW and a maximum torque of 385 Nm, with a maximum horsepower of 275. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 5-speed automatic transmission. National regulations stipulate specific dimensions for vehicles. According to the national standard "GB1589-89," the total width of a vehicle excludes side mirrors. The limitation on vehicle width is designed to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking to prevent accidents or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5 meters to comply with the usage requirements of public roads.
10
5
Share

How much fuel does a 460-horsepower engine consume at idle for one hour?

460-horsepower engine consumes 8 liters of fuel at idle for one hour. Prolonged idling increases fuel consumption and carbon buildup, causing certain environmental pollution, so it should be avoided whenever possible. Idling is not a speed but an operating condition. When the engine runs without load, it is called idling. If the accelerator pedal is fully released while the engine is running, the engine enters idle mode. The impacts of prolonged idling are as follows: Carbon Buildup: During prolonged idling, the throttle opening is very small, and the injector sprays highly concentrated fuel to maintain engine operation. Thus, idling is more likely to cause carbon buildup compared to driving or highway speeds. Extended idling will inevitably worsen engine carbon deposits, directly affecting the vehicle's power and comfort. Increased Fuel Consumption: Fuel consumption rises during idling. Tests show that idling for three minutes consumes fuel equivalent to driving one kilometer, while four hours of idling can burn 4-6 liters of fuel. Shortened Engine Lifespan: At idle, the lower temperature and pressure in the cylinders prolong fuel ignition time, and reduced cylinder sealing can lead to knocking sounds, shortening the engine's lifespan. Damage to the Catalytic Converter: Prolonged idling results in an overly rich air-fuel mixture, reducing oxygen levels in the exhaust. Incompletely burned mixture may ignite at the catalytic converter, potentially damaging it.
7
5
Share

Where is the battery located in a BMW Mini?

The battery of the BMW Mini version is located under the trunk. Reasons for placing it under the trunk: The BMW Mini version's battery is placed under the trunk because the Mini's body is relatively small. Positioning the battery under the trunk helps balance the weight distribution between the front and rear of the vehicle, ensuring better handling and providing additional safety protection. If installed in the engine compartment, there is a risk of oil-electric hybrid explosion in the event of a collision. Therefore, placing it under the trunk is a more prudent safety measure. Precautions for battery use: The battery lifespan is typically two years. When replacing a depleted battery, it is important to select the correct battery model and choose products from reputable manufacturers to avoid reducing the battery's service life.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.