What is the fuel consumption of the Audi Q3 1.4t?

1 Answers
DelRebecca
07/29/25 6:25am
Audi Q3 1.4t fuel consumption is 7.5 liters per 100 kilometers. 1.4 turbocharged engine: With 150 horsepower and a maximum torque of 250 Nm, this engine can output maximum power at 5000 to 6000 rpm and maximum torque at 1750 to 3000 rpm. This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. Low-power version 2.0-liter turbocharged engine: With 186 horsepower and a maximum torque of 320 Nm, this engine can output maximum power at 5000 rpm and maximum torque at 1600 to 4000 rpm. This engine is equipped with hybrid injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block. High-power version 2.0-liter turbocharged engine: With 220 horsepower and a maximum torque of 350 Nm, this engine can output maximum power at 4500 to 6200 rpm and maximum torque at 1500 to 4400 rpm. This engine is equipped with hybrid injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block.
Was this review help?
11
3
Share
More Forum Discussions

Why is the license plate reversed in the rearview mirror?

When viewed in the rearview mirror, the license plate appears reversed because the rearview mirror is installed front-to-back, causing the image to be inverted front-to-back relative to the mirror, not left-to-right. The car's rearview mirrors are located on the left and right sides of the front of the vehicle as well as inside the car at the front. These mirrors reflect the conditions behind, beside, and below the car. The key points for adjusting the interior rearview mirror are: position the distant horizon along the centerline of the mirror, then adjust left and right until the image of your right ear just appears at the left edge of the mirror. The purpose of the interior rearview mirror is to expand the driver's field of vision and reduce the occurrence of safety incidents.
19
2
Share

What brand is the Song license plate?

Song is a car brand under BYD. Here is the relevant information: 1. The BYD Song is the dual-mode version of the BYD S3, positioned as a new energy compact SUV. In terms of appearance, it features an X-shaped front grille, giving it a sporty look. On the side profile, the vehicle adopts hidden A/B/C pillar designs, creating a floating roof visual effect. 2. In terms of power, the BYD Song is equipped with a hybrid system consisting of a 1.5T engine and two electric motors, with one motor located on the front axle and the other on the rear axle, enabling four-wheel drive functionality. Additionally, the BYD Song has a pure electric range of 70km and can accelerate from 0-100km/h in 4.9 seconds.
17
0
Share

What National Emission Standard Does 'iv' Represent for Vehicles?

iv represents the National IV emission standard for vehicles. Additional information regarding emission standards is as follows: 1. The symbols from National 1 to National 6 are I, II, III, IV, V, and VI respectively, using Roman numerals instead of Arabic numerals. According to China's traffic laws, the emission standard label must be displayed on the upper right corner of the vehicle's front windshield; otherwise, it is considered a violation. 2. Vehicles come with a vehicle conformity certificate upon manufacture, which clearly states the emission standard of the vehicle. However, the vehicle management office registers and archives the certificate during the licensing process, so it is advisable to make a copy or take a photo for record-keeping. 3. The vehicle's emission standard can also be found in the 'Vehicle Information' section of the accompanying vehicle list.
1
2
Share

Where is the headlight height adjustment button on the Atenza?

There are adjustment screws located behind the headlights in the Atenza's engine compartment. You can adjust the position of these screws to modify the headlight height. However, the headlight height adjustment on the Atenza cannot be done arbitrarily. Find a level ground with a vertical white wall, such as a parking lot. Position the car directly facing the white wall, slowly drive straight towards it, and stop when the front of the car is as close as possible to the wall. Relevant information about vehicle lights is as follows: 1. Introduction: Vehicle lights refer to the lamps on the vehicle, serving as illumination tools for nighttime road driving and signaling tools for various vehicle movement indications. 2. Reverse lights: Reverse lights automatically turn on when the driver shifts into reverse gear. These white transparent lights primarily serve to alert vehicles behind that the car is reversing.
5
4
Share

How to Bleed Air from the Cruze Radiator?

Methods to bleed air from the Cruze radiator: 1. Start the car until the water temperature reaches 90 degrees, then turn off the engine and let it cool down to room temperature; 2. Open the driver's door, pull the hood release lever, and lift the hood; 3. Unscrew the radiator cap to release the internal high-pressure gas; 4. Top up the coolant to the MAX level in the radiator overflow tank to complete the operation. Taking the 2018 Cruze as an example, it belongs to the compact car category, with a body size of 4450mm in length, 1807mm in width, 1459mm in height, and a wheelbase of 2700mm. The front suspension of this car is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
13
3
Share

What to Do When Headlights Get Foggy from Water Ingress?

Solutions for foggy headlights due to water ingress are as follows: 1. Turn on the headlights: This method works when the fogging is minimal and caused by temperature differences. Keep the headlights on for a while. The heat will help the moisture evaporate and escape through the vent tubes, which generally does not damage the headlights or electrical circuits. 2. Remove and reseal the headlight assembly: Open the sealant, remove the headlight, and carefully inspect the interior for any damage. If no damage is found, separate the lens from the assembly, dry and blow-dry each part thoroughly, then reseal with new sealant. 3. Replace the lens or entire headlight: This is necessary when the lens is damaged, allowing moisture to enter and form fog. Damage can occur from road debris, such as flying stones or foreign objects hitting the headlight while driving.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.