What is the fuel consumption of the Audi A6 2.4?

1 Answers
LeGabriela
07/30/25 7:35am
The fuel consumption of the Audi A6 2.4 is 12 liters per 100 kilometers. In addition to the 2.4-liter naturally aspirated engine, there is also a 2.0-liter turbocharged engine. 1. The 2.4-liter naturally aspirated engine is a V6 engine with a maximum power of 130 kW, a maximum torque of 230 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed ranging from 3000 to 5000 rpm. This engine is equipped with a variable valve timing system and a variable intake manifold system, and it uses an aluminum alloy cylinder head and block. It is paired with a CVT transmission. 2. The 2.0-liter turbocharged engine has a maximum power of 125 kW, a maximum torque of 280 Nm, a maximum power speed ranging from 4300 to 6000 rpm, and a maximum torque speed ranging from 1800 to 4200 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and a cast iron cylinder block. It is paired with either a 6-speed manual transmission or a CVT transmission.
Was this review help?
7
1
Share
More Forum Discussions

What Causes the Trunk Speaker of Tango to Stop Working?

The reasons why the trunk speaker of Tango does not work include speaker wiring failure and speaker damage. The details are as follows: Speaker Wiring Failure: If there is a wiring failure inside the door speaker, the rear speaker will not produce sound when the audio system is turned on. The maintenance technician can identify the abnormal speaker by sound, remove the door inner panel, check whether the speaker wiring is loose, and use a multimeter to test the continuity of the speaker wiring to determine if there is a wiring failure. Repairing the speaker wiring can solve the problem. If the vehicle is under warranty, it can be handled for free at a 4S shop. Speaker Damage: In a new car, the speaker diaphragm is relatively hard. If the speaker volume is set too high, it can easily cause the diaphragm to break, resulting in abnormal sound from the speaker. The maintenance technician can identify the abnormal speaker by sound, and the speaker needs to be replaced. If the vehicle is under warranty, the speaker can be replaced for free at a 4S shop.
14
4
Share

Where is the fuel filler switch located on a Land Rover?

The fuel filler switch on a Land Rover is located next to the left front door sill. To refuel a Land Rover, first locate the fuel tank position. With the vehicle unlocked, simply press the fuel filler cap inward, and it will pop open automatically. The fuel tank location may vary depending on the model. The methods to open a Land Rover fuel tank are as follows: 1. You can use the mechanical key to open the fuel tank. 2. Open or close the fuel filler via the interior switch. This method is more convenient compared to using the mechanical key. 3. Direct press-type fuel cap. This allows the refueling personnel to open the cap and refuel without the driver exiting the vehicle. However, for vehicles with this type of fuel cap opening mechanism, the owner must ensure the vehicle is locked when parked. Otherwise, the fuel cap can be opened if the central locking system is not engaged, posing a certain safety risk.
10
2
Share

What are the new regulations for motorcycle scrapping?

New regulations for motorcycle scrapping in 2021: The service life of three-wheeled motorcycles is 12 years, while other motorcycles have a service life of 13 years. The state guides the scrapping of motor vehicles that have reached a certain mileage: three-wheeled motorcycles after traveling 100,000 kilometers, and other motorcycles after traveling 120,000 kilometers. Vehicles that fail to obtain the motor vehicle inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection period, or those that still do not meet the national safety standards for vehicles after repair and adjustment, are subject to scrapping. Relevant details of vehicle inspection are as follows: Vehicle inspection for appearance: Check whether the engine, chassis, body, and their accessories are clean, complete, and effective, whether the paint surface is uniform and aesthetically pleasing, whether the main assemblies have been replaced, and whether they match the initial inspection records. Vehicle inspection for performance: Test whether the vehicle's braking, steering control, lighting, exhaust, and other safety performances meet the requirements of the "Technical Conditions for Safe Operation of Motor Vehicles."
2
2
Share

How much fuel is in the car when it is delivered?

Usually, after the manufacturer produces the car, it is allocated to dealers and then handed over to 4S stores for sale. During this process, very little gasoline is used from the car's fuel tank, usually just enough to ensure the car can be loaded and unloaded from transport vehicles. Therefore, the fuel in the tank is typically around 5 liters. However, this figure is not the most accurate, as it can vary slightly due to certain factors. Generally, 4S stores will also bring spare fuel when delivering the car to prevent situations where the new car runs out of fuel. Below are some precautions for refueling: Refuel at reputable gas stations: Always refuel at reputable gas stations such as Sinopec or PetroChina. Not only will you avoid any price discrepancies, but you can also ensure the quality of the fuel. How to refuel at gas stations: Don't just ask for a certain amount of money's worth of fuel every time you go to the gas station. Instead, clearly tell the gas station staff how many liters of fuel you need.
11
0
Share

What are the effects of accidentally shifting to neutral while driving an automatic transmission car?

If an automatic transmission car is accidentally shifted to neutral while driving, you can directly shift back to D (Drive) without damaging the transmission. Hazards of intentionally shifting to neutral: 1. Many people believe that coasting in neutral saves fuel, which is a misconception. The idea that neutral coasting saves fuel is outdated. Modern cars mostly use fuel-injected engines, and prolonged idling consumes significantly more fuel than instantaneous fuel consumption. 2. Damage to the transmission: Automatic transmissions require lubrication during operation. When shifted to neutral, the oil pump stops supplying oil, leading to inadequate lubrication. This can cause the transmission to overheat or even result in complete failure. 3. Unsafe coasting in neutral: When a car is shifted to neutral, the forward momentum comes from inertia rather than the engine's power. In emergency situations, braking relies entirely on the braking system, which may lead to accidents.
5
2
Share

How many days after applying film to a new car in summer can the windows be opened?

After the car window film application is completed, avoid rolling the windows up and down within 3 days in summer and 7 days in winter. Opening windows may cause the edges of the film to lift: For cars with newly applied film, the windows are usually tight. During the process of opening and closing the windows, the edges of the film can easily get rolled or lifted, causing damage to the film. Park in a sunny area: Within a week after applying the film, park the car in a sunny place to ensure that the moisture inside the film evaporates completely. No car washing within three days: Do not wash the car within three days after applying the film to prevent moisture from causing the film to peel off. It is advisable to wash the car before applying the film.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.