What is the fuel consumption of the Arrizo 5 Plus 1.5T?

How to Use Geely's Cruise Control?

Specific steps for using Geely's cruise control: 1. Activate the speed cruise system by setting the sliding switch to the "ON" position. 2. Set the cruise speed After the system is activated, press the "SET" button when the desired speed is reached, and the car will maintain this speed continuously. Below is more information about using cruise control: 1. After setting the cruise speed, you can still accelerate using the accelerator pedal as usual. When the accelerator pedal is released, the system will restore the speed to the set cruise speed; if the speed exceeds the cruise speed by more than 10km/h and maintains this speed for more than 5 minutes, the cruise speed must be reset. 2. To decrease the cruise speed, press the "SET" button, and the speed will decrease by 1.5km/h; if the button is held down, the car will continue to decrease speed. Once the button is released, the current driving speed will be stored in the memory.

13

0

Share

How to set the sound prompt when locking the Tayron?

To set the sound prompt when locking the Tayron, you must visit a 4S store and have a technician assist with the setup. Here is more information about the Tayron: 1. The Tayron is a premium German mid-size SUV produced by FAW-Volkswagen, offering four powertrain options: 280TSI, 330TSI, 380TSI, and both front-wheel drive and all-wheel drive. 2. As a mid-size SUV from Volkswagen, the Tayron is based on the European version of the Tiguan. 3. The Tayron sets a new standard for premium German mid-size SUVs in terms of design, handling, comfort, cutting-edge technology, space structure, and safety features. 4. It incorporates multiple advanced driving assistance systems, such as the TJA Traffic Jam Assist system, ACC 3.0 Adaptive Cruise Control system, and PLA 3.0 Intelligent Parking Assist system, providing users with a safe driving experience.

5

4

Share

How to Handle 30 Points Deducted from Driver's License?

If more than 30 points are deducted within a scoring cycle, you are required to attend a seven-day educational training and retake both Subject 1 and Subject 3 of the driving test before you can retrieve your driver's license and clear the points. The following situations will result in a 12-point deduction: 1. Vehicle type mismatch; driving a motor vehicle that does not match the permitted vehicle type; 2. Drunk driving; driving a motor vehicle after drinking alcohol; 3. Overloading; driving a commercial passenger vehicle (excluding buses) or school bus with more than 20% of the approved passenger capacity; 4. Hit-and-run; causing a traffic accident and fleeing the scene without constituting a crime; 5. License plate violation; driving a motor vehicle on the road without a license plate, or intentionally covering, damaging, or not installing the license plate as required; 6. Forged or altered license plates; using forged or altered motor vehicle license plates, driving licenses, school bus signs, or using other motor vehicle license plates or driving licenses; 7. Unqualified driving; driving a motor vehicle on the highway in reverse, against traffic, or crossing the central divider to make a U-turn; stopping a commercial passenger vehicle in a highway lane; driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles on highways or urban expressways exceeding the speed limit by 20% or more, or on other roads exceeding the speed limit by 50% or more, as well as driving other motor vehicles exceeding the speed limit by 50% or more; driving medium-sized or larger passenger vehicles or hazardous material transport vehicles for more than 4 hours without stopping to rest or resting for less than 20 minutes; driving a school bus without the proper qualifications.

11

0

Share

Which manufacturer produces the Hanteng X5?

Hanteng X5 is produced by Hanteng Automobile Co., Ltd. More relevant details are as follows: 1. The Hanteng X5 features front-engine, front-wheel drive, electric power steering, a front McPherson independent suspension, and a rear torsion beam non-independent suspension. 2. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156 PS, a maximum power of 115 kW, a maximum torque of 215 Nm, and is paired with a 5-speed manual transmission. Taking the Hanteng X5's drive system as an example, its body dimensions are: length 4501mm, width 1820mm, height 1648mm, with a wheelbase of 2600mm, a fuel tank capacity of 50L, and a body weight of 1410kg.

13

0

Share

How to reset the wrench light on JAC Refine S3?

The "small wrench" appearing on the dashboard is a maintenance indicator, reminding the driver that the vehicle requires timely servicing. If maintenance hasn't been completed, this light will illuminate. Here are the steps to reset the indicator: 1. Turn off the ignition switch; 2. Press and hold the adjustment rod at the lower right of the instrument panel; 3. Turn the ignition switch to the "ON" position; 4. After approximately 5 seconds of ignition being on, the maintenance light will turn off, at which point you can release the adjustment rod. After vehicle maintenance, it's crucial to reset the maintenance reminder. Otherwise, you won't be able to accurately track the usage time of new components during the next replacement.

1

Share

When will China National V Emission Standard be implemented?

China National V Emission Standard was fully implemented on January 1, 2018. The National V Standard refers to the national atmospheric pollutant emission standard titled "Limits and Measurement Methods for Emissions from Light-duty Vehicles (China V)" issued by the Ministry of Environmental Protection in conjunction with the General Administration of Quality Supervision, Inspection and Quarantine. Additional information: The following are the specific details of the National V Standard: 1. The emission control requirements have been further enhanced. The nitrogen oxide (NOx) emission limits have been tightened by 25%-28%, and the particulate matter (PM) emission limits have been tightened by 82%. A new pollution control indicator, the particle number (PN), has been added. The National V Standard applies to vehicles with a maximum gross weight of less than 3.5 tons, including gasoline vehicles, diesel vehicles, gas-fueled vehicles, dual-fuel vehicles, and hybrid vehicles. It is applicable to the design, production, and sales of new vehicles but does not involve vehicles already in use. 2. It will significantly reduce emissions from new vehicles. It is estimated that over five years of implementation, the standard will reduce NOx emissions by 90,000 tons and PM emissions by 20,000 tons. As new vehicles gradually enter the market, the environmental benefits will increase year by year with prolonged implementation. Additionally, the simultaneous supply of high-quality fuel with the implementation of the National V Standard will drive emission reductions in a large number of in-use vehicles, reducing NOx emissions by approximately 300,000 tons and PM emissions by about 30,000 tons annually.

19

2

Share

What is the fuel consumption of the Arrizo 5 Plus 1.5T?

How to Use Geely's Cruise Control?

How to set the sound prompt when locking the Tayron?

How to Handle 30 Points Deducted from Driver's License?

Which manufacturer produces the Hanteng X5?

How to reset the wrench light on JAC Refine S3?

When will China National V Emission Standard be implemented?

What materials are required for the 6-year exemption inspection of company vehicles?

Why is the fuel measurement system for cylinder bank 1 too rich?

What is the displacement of the Bora?

Is It Safe to Store Gasoline in Iron Drums During Summer?