···
Log in / Register

What is the fuel consumption of the Accord gasoline version?

3 Answers
McHenry
09/02/25 4:38am
The Accord gasoline version currently has 5 models on sale. Among them, the 2022 260TURBO Comfort Edition, Luxury Edition, and Premium Edition are equipped with a 194 horsepower engine, with an NEDC fuel consumption of 6L per 100 km. The 2022 260TURBO Phantom Night·Flagship Edition and Premium Edition are also equipped with a 194 horsepower engine, with an NEDC fuel consumption of 6.5L per 100 km. The fuel tank capacity of the Accord gasoline version is 56L. The distance each model can travel on a full tank of fuel is as follows: 2022 260TURBO Comfort Edition, Luxury Edition, and Premium Edition can travel 56/6*100=933km on a full tank. 2022 260TURBO Phantom Night·Flagship Edition and Premium Edition can travel 56/6.5*100=861km on a full tank. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not vaporize easily, requiring more gasoline to burn, thus increasing fuel consumption. Additionally, in low temperatures, the engine's computer controls higher RPMs to warm up the car, which also increases fuel consumption.
Was this review help?
17
1
Share
AlexandraFitz
09/14/25 6:49am
I've been driving the Accord fuel version for almost three years now, a 1.5T model commuting 30 kilometers daily in the city. With normal air conditioning use, the fuel consumption during morning rush hour traffic jams fluctuates between 8.5-9.2L. On weekends when driving on the highway, I paid special attention - maintaining cruise control at 110 km/h resulted in fuel consumption of only about 6.3L. Surprisingly, national highways proved most fuel-efficient, maintaining a steady speed of 60-80 km/h could achieve 5.8L. I remember when I first got the car and didn't know better, frequently flooring the accelerator would push consumption over 10L. Now I've learned - easing off the gas before traffic lights and braking less has stabilized fuel consumption significantly. Tire pressure is also crucial - last time when the pressure was insufficient, it cost an extra 0.7L.
Was this review help?
1
2
Share
Expand All
NovaAnn
10/28/25 7:32am
The fuel consumption of the Accord really depends on how you drive it. Last week, I specifically tested it—when maintaining a steady speed of 70 km/h on urban expressways, the dashboard showed 5.9L/100km. However, during evening rush hour in the CBD while crawling in traffic, the instantaneous fuel consumption can jump to 12L. The impact of air conditioning is greater than expected; running the AC in summer consumes about 0.8L more compared to spring and autumn. Engine temperature also has a noticeable effect—fuel consumption is particularly high during the first ten minutes after a cold start in winter. The transmission is quite smart, though; the CVT keeps the RPM in the optimal range during smooth acceleration. The 53L fuel tank isn’t small, and I only need to refuel twice a month for my commute.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

Must You Avoid Rolling Down Windows for Three Days After Tinting?

After applying car window tint, it is advisable to avoid rolling the windows up and down for several days, as the newly installed tint film requires 5-7 days to firmly adhere to the window. During this period, the film, which hasn't fully bonded, is prone to shifting. Additionally, the following precautions should be noted: 1. Avoid washing the car: It's important to refrain from washing the car within the first three days after tinting to prevent the film from peeling off due to moisture. 2. Defroster lines: Try not to use the rear window defroster for about a week. After tinting, you may notice a foggy appearance caused by water vapor—this is a normal part of the drying process. Excess moisture can also negatively affect the defroster lines. During this time, you can gently clean the tinted surface with a damp towel, sponge, or soft cloth. Moreover, the foggy appearance will gradually fade over time.
16
5
Share

What is the difference between a mechanical torque-sensing limited-slip differential and a Torsen differential?

Here are the differences between a mechanical torque-sensing limited-slip differential and a Torsen differential: 1. Nature: The Torsen differential functions as a differential when the differential torque inside is small, but automatically locks when the differential torque becomes too large, effectively improving the vehicle's off-road capability. Off-road vehicles with only electronic limited-slip are suitable for icy roads and light off-roading but not for extreme off-road conditions. 2. Principle: The Torsen differential operates based on the high internal friction torque (Mr) of the worm gear transmission pair for torque distribution. The internal friction torque (Mr) depends on the relative speed of the output shafts at both ends. When the speed difference between the two output shafts is small, the friction of the worm driven by the rear worm gear is also minimal. The differential spur gear absorbs the speed difference between the two output shafts. The mechanical limited-slip differential prevents tire slippage through mechanical principles, distributing driving force evenly to all four tires. Such off-road vehicles can handle high-intensity and prolonged off-road conditions, making them the most rugged off-road vehicles available.
19
5
Share

What brand is hfbos tire?

hfbos tire is a brand of Kumho Tire from South Korea. The history of Kumho Tire dates back to 1960. Currently, it has become one of the world's largest tire manufacturing enterprises. Kumho Tire has a complete production line, covering various categories such as passenger car tires, commercial vehicle tires, and high-tech tires. The following are the subsidiaries of Kumho Tire: 1. Kumho (China) Tire Sales Co., Ltd.: In May 2006, Kumho established a sales company in Shanghai, China, fully responsible for the sales of products from Kumho's four factories in China, implementing the separation of production and sales. 2. Kumho Tire Tianjin Factory: Adhering to the principle of 'Green Enterprise,' Kumho Tire Tianjin Factory strictly implements dust pollution prevention measures to ensure that all pollution emissions meet national environmental standards.
13
4
Share

Where is the fog light located on a car?

Car fog lights are located below the headlights, at the lowest part of the bumper closest to the ground. Fog lights are divided into front fog lights and rear fog lights. The fog light activation button is on the light control stalk. Locate the fog light symbol position and rotate the control ring to turn on the fog lights. The fog light switch has three positions: position 0 is off, the first position controls the front fog lights, and the second position controls the rear fog lights. When one position is engaged, the front fog lights work; when two positions are engaged, both front and rear fog lights operate together. The purpose of fog lights is to make the vehicle visible to others in conditions of reduced visibility such as fog or heavy rain, so fog light beams need to have strong penetration capability.
5
5
Share

What is the Impact of Unsprung Mass on Vehicle Performance?

Unsprung mass affects vehicle acceleration and handling. Below is an introduction to the relevant content: 1. Performance Enhancement: If a car is compared to a sprinter, then the unsprung mass is like running shoes—the lighter the shoes, the faster the sprinter runs. By replacing heavy components with lightweight aluminum alloy wheels and suspension parts (such as control arms and rocker arms), the unsprung mass can be effectively reduced, thereby improving the vehicle's acceleration and handling performance. 2. Other Effects of Unsprung Mass: When a vehicle is driven on the road, the suspension system continuously absorbs impacts from the road surface. The ideal comfort state for passengers is when the vehicle body remains relatively stationary to the road surface while the wheels move up and down with the road conditions. Achieving this purely through mechanical structures is nearly impossible, but by increasing the ratio of sprung mass to unsprung mass, the vehicle can come closer to this ideal driving state.
2
3
Share

What is the purpose of road width transition markings?

The purpose of setting road width transition markings is to alert drivers that there will be intersections, crosswalks, or other crossing facilities ahead, requiring them to slow down or stop to yield. Specific functions of road width transition markings: When vehicles pass through sections with longitudinal deceleration markings, drivers will visually perceive the lane gradually narrowing. This serves as a reminder for drivers to increase their attention, take deceleration measures in advance, and drive slowly. It helps prevent situations where drivers abruptly brake when approaching the stop line, avoiding potential accidents. These markings effectively prevent sudden braking by motor vehicle drivers before reaching the stop line. Pedestrians on crosswalks can clearly sense vehicles yielding, thereby feeling safer, reflecting a harmonious traffic environment between pedestrians and vehicles. Appearance of road width transition markings: Longitudinal deceleration markings consist of a series of diamond-shaped dashed lines parallel to the lane boundary lines. At the starting position of these markings, a 30-meter transition section is set, where the diamond-shaped dashed lines gradually widen from 10 cm to 30 cm. These markings are one of the new additions to the national standard for road traffic markings (GB5768.2-2009).
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.