What is the fuel consumption of the Accord as published by the Ministry of Industry and Information Technology?

What brand of tires does the Great Wall Haval M6 use?

Haval M6 uses Maxxis and Goodyear brand tires. Below is relevant information about tires: 1. Functions of tires: (1) Acts as a force transmission medium between the vehicle and the road surface: Transmits driving force, braking force, steering force, etc., thereby enabling vehicle operations such as driving, braking, and steering; (2) Supports vehicle load: The vehicle load causes the tire to sink until the average pressure on the tire's contact area balances with the internal inflation pressure; (3) Reduces and absorbs vibrations and impacts during driving: Prevents early damage to vehicle components due to severe vibrations, while adapting to high-speed driving conditions and reducing driving noise, ensuring driving safety, comfort, handling stability, and fuel economy. 2. Tire maintenance: (1) Safe storage: Avoid placing tires near sunlight, oil, acid, or hydrocarbons, as they can erode the tire. Due to pressurization, liquids may penetrate the tire's inner liner into the carcass, causing tire damage; (2) Tire upkeep: Rotate tires timely, choose appropriate tread patterns, perform regular maintenance, check tire pressure periodically, repair damages promptly, and remove stones or foreign objects from treads; (3) Ensure standard pressure: Follow tire inflation standards to maintain tire pressure within specified values. Over or under-inflation increases wear and reduces mileage. When pressure is below standard, shoulder wear increases sharply; (4) Control tire temperature: During driving, tire deformation and friction raise internal temperature. When exceeding 100°C, the tire's strength significantly decreases, making it prone to delamination or blowouts. Since temperature is hard to measure, it is usually judged by pressure increase—higher pressure indicates higher temperature.

2

5

Share

What are the differences between the X-Trail and the RAV4?

The differences between the X-Trail and the RAV4 can be summarized in the following three aspects: 1. Basic Information: The X-Trail is a compact SUV under Nissan, while the RAV4 is a compact SUV under Toyota. The latest top-tier model of the X-Trail is the 2021 2.5L CVT XV Premium 4WD, and the latest top-tier model of the RAV4 is the 2020 Hybrid 2.5L Four-Wheel Drive Flagship Edition. 2. Dimensions: The X-Trail has a longer body and wheelbase compared to the RAV4. The latest top-tier X-Trail model measures 4675(mm) in length, 1830(mm) in width, and 1724(mm) in height, with a wheelbase of 2706(mm). The latest top-tier RAV4 model measures 4600(mm) in length, 1855(mm) in width, and 1680(mm) in height, with a wheelbase of 2690(mm). Overall, the X-Trail's top-tier model is longer in body and wheelbase than the RAV4's top-tier model. 3. Powertrain: The X-Trail is equipped with a 2.5L naturally aspirated engine, while the RAV4 also features a 2.5L naturally aspirated engine. The X-Trail's engine delivers a maximum horsepower of 181Ps, a maximum power of 133kW, and a maximum torque of 239N·m, paired with a CVT continuously variable transmission (simulating 7 gears). The RAV4's engine delivers a maximum horsepower of 178Ps, a maximum power of 131kW, and a maximum torque of 221N·m, paired with an E-CVT continuously variable transmission. Additionally, the RAV4 is equipped with an electric motor that delivers a maximum horsepower of 174Ps and a maximum power of 128kW. In terms of power output, the RAV4's top-tier model is more powerful than the X-Trail's top-tier model.

14

4

Share

What is the tire size of the Kia K2?

The Kia K2 has two tire sizes: 185/65R15 and 195/55R16. In 185/65R15, the first number 185 represents the tire width of 185MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 15 represents the rim diameter of 15 inches. The letter "R" in the middle stands for radial tire. In 195/55R16, the first number 195 represents the tire width of 195MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 16 represents the rim diameter of 16 inches. The letter "R" in the middle stands for radial tire. The spare tire used in standard Kia K2 models is a non-full-size spare tire, equipped with Kumho tires. In terms of wheel design, the K2 features multi-spoke aluminum alloy wheels. The top-tier model uses Hankook tires paired with 16-inch aluminum alloy mirror-finish wheels. If you want to replace the tires yourself, you can follow these steps: Take out the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, making sure the jack is positioned under the vehicle and at a right angle to the ground; Remove the hubcap and loosen the nuts counterclockwise, but do not fully unscrew them—just enough to eliminate resistance. Keeping the tire on the ground while loosening the nuts ensures that the nuts turn, not the tire; Turn the nuts counterclockwise until they come off, repeating this step for all lug nuts, then fully remove the nuts; Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are snug. At this point, the tire replacement is complete. In addition to the model, tires are marked with the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as "Standard rim 5.00F".

19

1

Share

Can You Still Drive When the Engine Fault Light Comes On?

Engine fault lights come in two colors: yellow and red. When the yellow fault light is on, you can continue driving; when the red fault light is on, you must stop driving immediately. When the yellow fault light is illuminated, it serves as a warning, indicating that certain system parameters in the car may have exceeded the set range. The vehicle can still be driven, but some functions may be limited. When the red fault light is on, it indicates a serious fault, and the car must be stopped immediately. Turn off the engine, refrain from further driving, and check for the source of the fault. There are seven main reasons why the engine fault light may come on: Sensor malfunction: Sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors may become damaged, have poor contact, or lose signal. When the car's ECU cannot accurately obtain engine data, the engine fault light will illuminate. Fuel or oil quality issues: If fuel or engine oil is not added according to the manufacturer's requirements, it may cause engine wear, leading to the fault light turning on. Poor combustion of the air-fuel mixture: Poor combustion can lead to engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the fault light will illuminate as a warning. Issues such as faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion. Turbocharger problems: Issues with the intake boost pipes or turbocharger can also trigger the engine fault light. The most common problem is a damaged turbocharger, often accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If the car's air intake is compromised, it may lead to engine pipe blockages, which can trigger the fault light. A dirty air filter or lack of regular cleaning can cause intake issues. Exhaust problems: Exhaust system faults can also cause the engine fault light to illuminate. Common causes include faulty rear oxygen sensors, catalytic converters, exhaust camshafts, or bearings. The catalytic converter is the most frequent issue, often due to the use of leaded gasoline, lead- or silicon-containing oil additives, physical damage, or fuel system malfunctions. Anti-theft system malfunction: If the car's electronic anti-theft system fails or the anti-theft controller does not match the engine ECU, the engine may not function properly, and the fault light will turn on. If the engine fault light comes on, follow these steps: First, check whether the engine is running normally. If there are issues such as shaking or smoke, avoid restarting the engine. Note: If the red light is on, do not restart the engine under any circumstances. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position (without pressing the clutch). The car will perform a self-check, and after 5-10 seconds, check whether the fault light has turned off. If the fault light remains on, visit a service center as soon as possible. Technicians can use a diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.

16

4

Share

What is the fuel consumption of the Prado 4.0?

There are 16 models of the 4.0 Prado. The 2004 Prado 4.0L automatic GX, GX Sport DVD edition, GX Luxury edition, TX-L NAVI, and TX-L (5 models) have an NEDC fuel consumption of 12.6L per 100km. The 2006 Prado 4.0L automatic VX NAVI edition, automatic VX, 2010 4.0L automatic VX NAVI, and VX (4 models) have an NEDC fuel consumption of 12.8L per 100km. The 2010 Prado 4.0L automatic TX (1 model) has an NEDC fuel consumption of 12.2L per 100km. The 2014 Prado 4.0L automatic VX NAVI, automatic VX, automatic TX-L NAVI, automatic TX-L, and automatic TX (5 models) have an NEDC fuel consumption of 13.37L per 100km. The fuel tank capacity is the same for different models of the 4.0 Prado. The distance that can be covered with a full tank of fuel is as follows: For the 2004 Prado 4.0L automatic GX, GX Sport DVD edition, GX Luxury edition, TX-L NAVI, and TX-L (5 models), the fuel tank capacity is 87L, and the distance that can be covered with a full tank is 87/12.6*100=690km. For the 2006 Prado 4.0L automatic VX NAVI edition, automatic VX, 2010 4.0L automatic VX NAVI, and VX (4 models), the fuel tank capacity is 87L, and the distance that can be covered with a full tank is 87/12.8*100=680km. For the 2010 Prado 4.0L automatic TX, the fuel tank capacity is 87L, and the distance that can be covered with a full tank is 87/12.2*100=713km. For the 2014 Prado 4.0L automatic VX NAVI, automatic VX, automatic TX-L NAVI, automatic TX-L, and automatic TX (5 models), the fuel tank capacity is 87L, and the distance that can be covered with a full tank is 87/13.37*100=651km. Vehicle fuel consumption is directly related to five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before red lights, can increase fuel consumption. The vehicle itself: Vehicles with larger displacements generally consume more fuel than those with smaller displacements because larger displacements typically produce more power, requiring more gasoline for combustion. Heavier vehicles also consume more fuel because greater weight requires more driving torque. Road conditions: Dirt roads, muddy roads, soft surfaces, and mountainous roads increase resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to combust, which increases fuel consumption. Additionally, at low temperatures, the engine computer controls higher RPMs to warm up the engine, which also increases fuel consumption.

10

5

Share

How to Identify 4WD in Mercedes-Benz E-Class?

Mercedes-Benz E-Class 4WD identification method: For 4WD models, you can find the 4WD logo on the rear or side of the vehicle. Generally, only high-end models are equipped with the 4WD system. Mercedes-Benz vehicles adopt a full-time 4WD system, with the core technology being the 4ETS differential limiting technology. The full-time 4WD system used by Mercedes-Benz allows the car to maintain four-wheel drive mode during driving, with the engine's output torque distributed to the front and rear wheels in a fixed ratio. This can improve the car's handling performance to a certain extent and make reasonable power distribution according to the road conditions.

13

5

Share

What is the fuel consumption of the Accord as published by the Ministry of Industry and Information Technology?

What brand of tires does the Great Wall Haval M6 use?

What are the differences between the X-Trail and the RAV4?

What is the tire size of the Kia K2?

Can You Still Drive When the Engine Fault Light Comes On?

What is the fuel consumption of the Prado 4.0?

How to Identify 4WD in Mercedes-Benz E-Class?

What is the replacement interval for engine mounts?

What is the actual fuel consumption of the Dongfeng 580?

What engine does the Boyue use?

What are the maintenance details for FAW-Volkswagen Jetta?