What is the fuel consumption of the Accord?

1 Answers
JulianaMarie
07/30/25 1:42am
The fuel consumption of the Accord is 7.07L/100km. Factors affecting fuel consumption are as follows: Rough roads increase fuel consumption: Driving on congested or uneven roads for extended periods in low gears will inevitably increase fuel consumption. Using the trunk as storage increases fuel consumption: Treating the trunk as a storage space and cramming it with unnecessary items increases the vehicle's weight. It's important to note that vehicle weight is directly proportional to fuel consumption. For every 10% reduction in weight, fuel consumption decreases by several percentage points. Incorrect driving habits can double or triple fuel consumption: Improper driving habits have the greatest impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, rapid acceleration and sudden braking are the most common issues.
Was this review help?
18
2
Share
More Forum Discussions

Where is the rearview mirror heating switch on the Borui GE?

The rearview mirror heating switch on the Borui GE is located in the row of buttons below the air conditioning vent on the car's center console. The second button from the right is the rearview mirror heating switch; press it to activate. The car's rearview mirrors are positioned on both the left and right sides of the front of the car, as well as inside the car at the front. They serve as the "second pair of eyes," expanding the driver's field of vision. Below is additional information about rearview mirrors: 1. Rearview mirrors are categorized by installation location into exterior rearview mirrors, lower rearview mirrors, and interior rearview mirrors. 2. By purpose, exterior rearview mirrors reflect the rear side of the car, lower rearview mirrors reflect the front lower part of the car, and interior rearview mirrors reflect the rear of the car and the interior situation. 3. There are two types of rearview mirror surfaces: one is a flat mirror, which provides an image the same size as the naked eye sees, and the other is a convex mirror, with a spherical surface that provides a smaller image than the naked eye sees but a larger field of vision.
1
3
Share

Where is the fuse box located in the BMW 5 Series?

There are two fuse boxes in the BMW 5 Series. One is located beneath the glove compartment on the passenger side, accessible by removing the cover panel underneath the glove box. The other, similar to the BMW 3 Series, is situated beneath the trunk. The automotive fuse box is a housing designed to accommodate vehicle fuses, responsible for transmitting driving signals to various parts of the vehicle body. It serves as a critical component among automotive electronic control elements and represents one of the more technologically sophisticated and process-demanding parts in the vehicle structure. Automotive fuse boxes can be categorized as follows: 1. By fuse type: They can be divided into fuse tube boxes and fuse strip boxes. 2. By fuse size: They can be classified into large fuse boxes, medium fuse boxes, and small fuse boxes. 3. By material: They can be categorized into plastic fuse boxes and bakelite fuse boxes. 4. By environmental standards: They can be divided into eco-friendly fuse boxes and non-eco-friendly fuse boxes. 5. By installation method: They can be classified into lead-type fuse boxes, circuit board-type fuse boxes, and instrument panel-mounted fuse boxes.
11
5
Share

How many kilometers for the first maintenance of the 10th generation Accord?

GAC Honda's 10th generation Accord requires its first maintenance at 3,000~5,000 kilometers. The first maintenance includes an oil and oil filter change, along with a comprehensive inspection and diagnosis of the vehicle's condition and usage. The first maintenance service is free. Below are additional details about the GAC Honda 10th generation Accord: 1. GAC Honda Accord models offer two types of engine oil. The 2.0L and 2.4L naturally aspirated models use the original mineral oil, model SM5W-30, requiring 4L per maintenance. 2. The 3.0L V6 engine uses the original full synthetic oil, model SM5W-40, requiring 4.3L per maintenance.
7
3
Share

Is the Leiling equipped with a full-size spare tire?

Toyota Leiling's spare tire is not full-size. A full-size spare tire has the exact same specifications as the other four tires on the vehicle, allowing it to temporarily replace any tire that is temporarily or permanently unusable. Below are the steps for removing a tire: 1. Turn counterclockwise to loosen and clockwise to tighten. 2. Loosen the tire by turning counterclockwise, unscrewing each bolt one by one, and use a jack to partially lift the vehicle. 3. When using the jack, note that there are several slots on both sides of the vehicle's undercarriage for placing the jack. Ensure the jack is placed within these slots to avoid accidents. 4. Once the jack is raised, the loosened bolts can be easily removed one by one, allowing the entire tire to be taken off, completing the tire removal process. Below are precautions for removing a tire: 1. When removing a tire, first loosen the fixing bolts before using the jack to partially lift the vehicle. 2. Direction of force when removing tire bolts: counterclockwise to loosen; clockwise to tighten. 3. When using the jack, place it within the slots on both sides of the vehicle's undercarriage.
18
1
Share

Where is the radiator of Chery Tiggo 3 located

The radiator of Chery Tiggo 3 is located near the engine. The car's radiator, also known as the heat exchanger, is the main component of the vehicle's cooling system. As the core part of the cooling system, the radiator maintains engine temperature through the circulation of coolant in the engine waterways. Relevant information about car radiators is as follows: 1. When the engine water temperature is high, the water pump circulates coolant repeatedly to lower the engine temperature (the radiator consists of hollow copper tubes. Hot coolant enters the radiator, gets air-cooled, and then circulates back to the engine cylinder walls) to protect the engine. In winter, if the water temperature is too low, the circulation will stop to prevent the engine from becoming too cold. 2. The car radiator is mainly composed of the radiator core, water pipes, cooling fins, upper tank, and lower tank. The upper tank is on top of the radiator and is connected to the lower tank via water pipes. When hot coolant flows from the upper to the lower tank, it becomes warm. The cooling fins form air channels where, through the suction of the fan and the relative wind speed when the vehicle moves forward, large amounts of cold air absorb the heat from the coolant flowing through the pipes and then dissipate it into the atmosphere.
4
1
Share

What is the battery model for the Mercedes-Benz C200 key?

The battery model is CR2032. It is a lithium manganese dioxide battery, named according to the IEC standard. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the battery is cylindrical in shape, with F used as a substitute if it is square; 20 indicates that the battery diameter is 20mm; 32 represents the battery height of 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is approximately 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is not high or quality control is poor, its lifespan may be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. Under ideal usage conditions (sealed, room temperature, free from moisture, etc.), the lifespan can be further extended to 8 years or even 10 years. The usage time of a vehicle remote key battery is closely related to the frequency of use. The more frequently it is used, the shorter the battery life will be. If the remote key battery runs out of power, the mechanical key can be used directly to unlock the vehicle and start the engine. The batteries used in car remote keys are button cells, mainly including the following models: CR2016, CR2025, CR2032, and CR2450. For the specific model used in each key, the owner can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: This is one of the most commonly used remote key batteries. The battery voltage is 3V. Since most car key batteries are powered by 9V, all three batteries need to be replaced each time. Examples include: Guangben, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter of 20mm and thickness of 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than that of CR2016, but it is still used in some car keys. It is thicker than CR2016 but has a relatively higher storage capacity. CR2025 specifications: battery diameter of 20mm and thickness of 2.5mm. This type of battery is also commonly used in audio remotes. Button-type CR2032 battery: Its thickness is twice that of CR2016. The 3V-CR2032 lithium manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically stable manganese dioxide, the negative electrode material is metallic lithium, and the electrolyte is a lithium battery electrolyte. The main components of the electrolyte are ethylene glycol dimethyl ether, propylene carbonate, and lithium perchlorate. It is shaped like a button, hence the name button lithium battery or lithium-manganese button battery. Button-type CR2450 battery: Compared to the other three models, it is thicker and larger, with a diameter of 24.5mm and a height of 5.0mm. The rated current value of CR2450 is 0.2mA. It is mainly used in low-power electronic products. Generally, the battery can provide an output current of 0.001mA to 5mA, with a continuous output current of up to 15mA and a flash output current of up to 30mA, meeting the requirements of most small electronic products for light emission, sound production, and RF output.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.