What is the fuel consumption of the 3.0 GL8?

1 Answers
DelColin
07/30/25 6:48am
3.0 GL8 fuel consumption per 100 kilometers: 6.5-6.6 liters (at a constant speed of 90km/h). The following are methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance will require higher fan speeds and lower temperatures to achieve a cooling effect. 2. Frequent hard braking: Frequent hard braking is the main reason for persistently high car fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive use of air conditioning in small-displacement vehicles: For vehicles exposed to the sun, do not turn on the air conditioning immediately after getting in. First, open the windows and set the fan to a higher setting without turning on the air conditioning to expel the hot air inside the car. Wait until the vehicle has cooled down moderately before turning on the air conditioning.
Was this review help?
13
2
Share
More Forum Discussions

What insurance should be purchased for a new car?

New cars should purchase compulsory traffic insurance, vehicle damage insurance, and no-deductible insurance. Below is more information about auto insurance: Introduction to auto insurance: Auto insurance, also known as motor vehicle insurance, is a type of commercial insurance that covers personal injury or property damage caused by natural disasters or accidents involving motor vehicles. Auto insurance is a category of property insurance and is relatively new in the field of property insurance, as it emerged and developed alongside the advent and popularization of automobiles. Unlike modern motor vehicle insurance, early auto insurance primarily focused on third-party liability coverage and gradually expanded to include risks such as collision damage to the vehicle body. Basic functions of auto insurance: The fundamental functions of insurance, including organizing economic compensation and fulfilling insurance payouts, are also the basic functions of motor vehicle insurance.
2
4
Share

What Causes Difficulty in Starting a Warm Pull-Start Gasoline Engine?

Difficulty in starting a warm engine is primarily caused by excessive carbon buildup in the throttle body, idle air control valve, intake manifold, intake valves, and combustion chamber. When carbon deposits and dirt accumulate excessively in the intake manifold, the cross-sectional area of the air passage changes, preventing the control unit from precisely regulating the idle air intake. This results in an overly rich or lean air-fuel mixture, leading to abnormal combustion, engine shaking after startup, or even failure to start. Below are other potential causes: 1. Minor fuel injector leakage: Fuel may seep into the combustion chamber after the engine is turned off, causing an overly rich mixture during subsequent startups and making it difficult to start. 2. Damaged charcoal canister: If the solenoid valve remains open, the air-fuel mixture in the intake manifold will stay enriched, leading to an overly rich mixture when the engine is warm and making it harder to start.
10
5
Share

Should a New Car Be Equipped with a Dash Cam?

It is recommended to install a dash cam for a new car. The classifications and functions of dash cams are as follows: Classifications of dash cams: High-definition dash cam, compact dash cam, night vision dash cam, wide-angle dash cam, dual-lens dash cam, multi-function dash cam, and glasses-style multi-function dash cam, etc. Functions of dash cams: A dash cam is a device that records images, sounds, and other related information during vehicle operation. The main purpose of a dash cam is to record the entire driving process of the car, providing video and audio evidence for traffic accidents. It records the time, speed, and location in the video, functioning similarly to a 'black box.' With the increasing prevalence of 'crash for cash' scams, dash cams have become particularly important.
5
3
Share

What are the brands of fully synthetic engine oil?

Many brands have introduced fully synthetic engine oils, such as Mobil, Castrol, Shell, Liqui Moly, Fuchs, Motul, Amsoil, HKS, Great Wall, and Tongyi. Here is more information about fully synthetic engine oils: 1. Introduction: Fully synthetic engine oil is a type of oil manufactured by humans using chemical synthesis methods. It is artificially produced by chemically decomposing various natural substances and then synthesizing them with other materials to create the final product. 2. Advantages: Fully synthetic engine oil offers higher lubricity, lower friction resistance, better oxidation resistance, and stronger cleaning properties compared to mineral oils. It is less prone to deterioration, has lower evaporation loss, and a longer lifespan than conventional oils. It also provides excellent chemical stability, good radiation resistance, high oil film strength, minimal foaming, superior lubrication, and reduced wear. Additionally, fully synthetic oil has less thermal degradation, saves fuel, and provides better engine protection.
15
2
Share

What does the content of the Small Vehicle Subject 2 exam include?

Small Vehicle Subject 2 exam includes five components: reverse parking into left and right garages, parallel parking, curve driving, right-angle turns, and stopping and starting on a slope. Subject 2, also known as the minor road test, primarily assesses the mastery of motor vehicle driving skills and the judgment of spatial positioning. The test must be conducted by the examinee driving the vehicle in a designated area, with a total of 5 test items and two attempts allowed. The content of the car driving test includes four major subjects: Subject 1, Subject 2, Subject 3, and Subject 4. Subject 1 is a theoretical test, mainly covering legal regulations on road traffic safety, road signs, markings, and other theoretical knowledge. It is conducted on a computer, with 45 minutes allocated, a full score of 100, and a passing score of 90.
20
5
Share

What are the three main components of a crank-connecting rod mechanism?

The crank-connecting rod mechanism consists of three main parts: the engine block group, the piston-connecting rod group, and the crankshaft-flywheel group. The engine block group mainly includes stationary components such as the cylinder block, crankcase, oil pan, cylinder liner, cylinder head, and cylinder gasket. The piston-connecting rod group mainly includes moving components such as the piston, piston rings, piston pin, and connecting rod. The crankshaft-flywheel group mainly includes mechanisms such as the crankshaft, flywheel, torsional vibration damper, and balance shaft. The crank-connecting rod mechanism operates under conditions of high temperature, high pressure, high speed, and chemical corrosion. Since the crank-connecting rod mechanism moves at variable speeds under high pressure, it mainly bears gas pressure, reciprocating inertia forces, centrifugal forces from rotating components, and friction forces from the contact surfaces of relatively moving parts.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.