What is the fuel consumption of the 2022 Geely Emgrand?

3 Answers
LeEvelyn
07/28/25 8:09pm
The fuel consumption is 6.9L per 100 kilometers. Below is the relevant information: Introduction: The Geely Emgrand (referred to as Emgrand) is a sub-brand under the Geely parent brand, equipped with the GeTec-DVVT turbocharged engine, featuring front-wheel drive and a maximum power of 98kw, with turbo intervention at 1800 rpm. The new Geely Emgrand was launched on July 26, 2014, equipped with a 1.3T-GeTec-DVVT turbocharged engine, featuring front-wheel drive, a maximum power of 98kw, turbo intervention at 1800 rpm, and a peak torque output of 185NM at 2000 rpm. Interior: The EC7-RV features a unique red and black dual-tone interior, with more eye-catching orange-red decorations on the seats and both sides of the doors, making it appear more dynamic. Powertrain: In terms of power, the 2013 Emgrand EC7 still comes with a 1.5L and 1.8L engine. The 1.5L model is paired with a 5-speed manual transmission, while the 1.8L model is paired with a 5-speed manual transmission and a CVT continuously variable transmission.
Was this review help?
12
2
Share
MacJohn
08/11/25 11:54pm
I've been driving the 2022 Geely Emgrand for a while now as my daily commuter car. Overall, I find the fuel consumption quite moderate. The official NEDC data claims around 6.2L/100km, but in reality, my average is between 7.5-8L/100km. In city traffic with congestion, it can go up to 9L, while on the highway it drops to about 6.5L. The car is equipped with a 1.5L engine and CVT transmission, providing stable starts without being too fuel-thirsty. However, using the air conditioning increases fuel consumption by about 1L. I recommend paying attention to tire pressure and regular maintenance, such as changing the air filter periodically, which helps stabilize fuel consumption. Driving habits play a crucial role – aggressive acceleration or sudden braking can easily spike fuel usage, while developing a habit of smooth acceleration can save a significant amount of money. Before long trips, checking the car's condition and avoiding excessive load are small actions that, when combined, help me keep my monthly fuel expenses between 600-700 RMB, which is more economical than expected.
Was this review help?
1
2
Share
Expand All
AubreeRose
09/30/25 6:48am
Speaking of the fuel consumption of the 2022 Geely Emgrand, as an ordinary office worker, my personal experience proves that it's not the most fuel-efficient but certainly not a gas-guzzler either. After driving it for over half a year, my daily city commuting averages around 8L/100km, dropping to about 7L on highways. The official figure of approximately 6L is just an ideal value, as actual consumption depends on road conditions and driving habits. Conservative drivers like me can maintain relatively low numbers. The main factors affecting fuel consumption include the 1.5L engine displacement and transmission efficiency, plus using the air conditioning adds to the load. I recommend utilizing the car's built-in eco mode to help save fuel. On a related note, the Emgrand offers good overall comfort and fuel economy, making it suitable for families. However, be mindful of slightly increased fuel consumption in winter due to temperature changes. An extra liter per 100 kilometers doesn’t add much to annual costs at today’s fuel prices, but keeping a fuel log to monitor and adjust driving habits is a practical life tip.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

Where is the air intake located on the Magotan?

It is located at the grille area. You can identify the intake system by spotting a thick tube connected to the engine (intake pipe) along with an air filter box, which then connects to the grille. The air intake utilizes forward motion to collect and channel air into the engine or ventilation system. Primary functions of automotive air intake: Air delivery: Supplies clean, dry, sufficient, and stable air to the engine to meet its operational requirements, preventing contaminants and large particulate matter from entering the combustion chamber, which could cause abnormal engine wear. Noise reduction: Another critical role of the intake system is to minimize noise and regulate airflow. Excessive noise not only affects the vehicle externally but also impacts cabin noise levels, significantly influencing ride comfort. The design quality of the intake system directly affects engine power output and acoustic performance, which correlates with overall vehicle comfort. Properly designed muffler components can reduce subsystem noise and enhance the vehicle's NVH (Noise, Vibration, and Harshness) performance.
4
5
Share

What does it mean when 6 warning lights are on in a Magotan?

There are many possible reasons for the engine warning light to come on in a Magotan. It could be due to wiring issues, sensor malfunctions, control module failures, poor fuel quality, unclean engine cylinders, or carbon deposits. It is recommended to visit a 4S shop or repair facility as soon as possible to inspect the relevant modules and components. Below is some relevant information: Notes: If other warning lights remain on, it is necessary to have the corresponding modules and components checked at a 4S shop or repair facility. If only the engine warning light is on, try restarting the vehicle and observe whether the light remains on. If the engine warning light turns off, there is no issue. However, if it stays on, the engine-related components and modules should be inspected at a 4S shop or repair facility. Magotan: The Volkswagen Magotan is closely related to the Passat B6, known as the Future B6, and is the first B-segment sedan produced and sold by FAW-Volkswagen since its establishment. According to FAW-Volkswagen, "Mai" symbolizes confidence, decisiveness, and dynamism, while "Teng" represents soaring, surpassing, and passion.
10
2
Share

What are the reasons for the engine light to come on in a Mazda6?

The reasons for the engine light to come on in a Mazda6 are: 1. Damaged ignition coil or large spark plug gap; 2. Short circuit in the engine wiring; 3. Leakage in the ignition system; 4. Faulty oxygen sensor or failed catalytic converter; 5. Poor performance of the fuel pressure regulator or dirty fuel filter. The solutions for the engine light to come on in a Mazda6 are: 1. Open WDS for fault diagnosis; 2. Check the solenoid valve and wiring harness; 3. Repair the wiring harness and replace the PCM. Taking the 2015 Mazda6 as an example, its body dimensions are: length 4670mm, width 1780mm, height 1435mm, wheelbase 2675mm, and fuel tank capacity 64L. The 2015 Mazda6 is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 147PS, maximum power of 108kW, and maximum torque of 183Nm.
7
0
Share

What brand is the audio system in the Magotan 330 Luxury model?

The audio system in the Magotan 330 Luxury model is from the Dynaudio brand. Car audio systems are installed to alleviate the monotony of driving and traveling for both the driver and passengers. For music-loving car owners, listening to music while driving can be particularly enjoyable, but it's important to keep the volume at a reasonable level to avoid compromising driving safety. Here is some relevant information: Audio Brand: Initially, car audio systems started with AM radios, later evolving to AM/FM radios, cassette players, and then to CD players compatible with DCC and DAT digital audio. Today, car audio systems have reached high standards in sound quality, operation, and vibration resistance, capable of withstanding the bumps of rough roads while ensuring stable performance and perfect sound quality. Components of Car Audio Systems: Head Unit: The source of car audio. Head units include RADIO-only units, RADIO plus MP3 units, CD units, MP3 plus CD changers, CD plus navigation units, and CD/DVD/car MP5 units, DVD players, etc. Speakers: The sound-producing units of car audio systems, converting electrical energy into sound waves. These include tweeters, mid-range speakers, woofers, and subwoofers.
12
1
Share

How to Match the Tire Pressure Sensor for Buick LaCrosse?

Buick LaCrosse tire pressure sensor replacement and matching method is as follows: 1. With the vehicle ignition on, turn the left stalk on the steering wheel to select and enter the tire pressure display column. 2. Press the SET/CRL button on the left stalk (for about 2 to 3 seconds). 3. The onboard computer prompts for tire pressure monitoring relearning, select Yes (enter tire pressure monitoring relearning mode), (otherwise no learning). 4. The horn beeps twice, indicating that tire pressure monitoring relearning is in progress. (The onboard computer also displays: Tire pressure learning). 5. The vehicle's left turn auxiliary light stays on, and the left mirror turn signal stays on, indicating that the left front tire pressure relearning is in progress. At this time, increase (inflate) or decrease (deflate) the left front tire pressure for about 5 seconds (or +8KPa value). This completes the relearning process for the left front tire pressure monitoring, and the horn beeps to prompt entry into the tire pressure learning mode. 6. The horn beeps twice, and the turn signal stays on for about 3 seconds, indicating that the four-tire pressure monitoring relearning is complete.
4
5
Share

How to Identify Brake Pad Models?

Brake pad model numbers represent some basic dimensional parameters of the brake pads. For specific vehicle models, you can download an application. Visual self-inspection only provides a rough assessment, aiming to detect potential vehicle issues as early as possible and understand the current condition of the vehicle.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.