What is the fuel consumption of the 2021 Malibu XL 1.5T?

How Long Does It Take to Complete Vehicle Registration?

Vehicle registration refers to the official licensing process. Apart from the auto insurance handled at the 4S dealership and the vehicle purchase tax paid at the national tax bureau, most procedures are completed at the vehicle management office. If all required documents and materials are prepared, and the vehicle management office is not crowded (no queuing required), the licensing process typically takes only 1-3 hours. Before vehicle registration, please note the following points: 1. Determine whether to register for a local or out-of-town license plate before paying the purchase tax: According to regulations, the vehicle purchase tax should be paid at the vehicle's registered location. If choosing a local license plate, the tax must be paid in Shanghai; if choosing an out-of-town license plate, the tax must be paid in the respective region. 2. Vehicles failing to meet emission standards cannot complete registration or transfer procedures: Since the implementation of the 'China V' emission standard for motor vehicles, all newly purchased vehicles registering in Shanghai for the first time or vehicles transferred from other regions to Shanghai must comply with the 'China V' standard. Vehicles failing to meet environmental emission standards will be unable to complete registration or transfer procedures.

3

5

Share

What Causes the Failure of the Auto Hold Function?

The failure of the auto hold function may be caused by the parking brake lever not being able to lock in place; a malfunctioning parking brake; aging of the parking brake; excessive clearance between the friction pads and the brake drum in the auto hold system, oil contamination or severe wear on the friction pads and brake drum, exposed rivets, or surface hardening leading to slippage and failure; severe wear on the parking brake pin shaft, excessive clearance, or an overly long adjustment of the parking brake pull rod. It is advisable to promptly visit a 4S shop for inspection and repair. Below is an introduction to 4S shops: 1. Introduction to 4S shops: A 4S shop, fully known as an automobile sales service 4S shop, is a car sales enterprise that integrates vehicle sales, spare parts, after-sales service, and information feedback. 2. Services of 4S shops: The core competitiveness of a car 4S shop lies in winning customers with high-quality services. At a car 4S shop, consumers can access all value-added services related to car information, market trends, after-sales service, maintenance instructions, and spare parts supply. Both complete vehicles and spare parts are guaranteed to be original, relieving consumers of any concerns regarding after-sales service, repairs, and maintenance.

13

4

Share

What are the dimensions of a front-four-rear-eight vehicle in meters?

Front-four-rear-eight vehicle (box/flatbed) dimensions: Length 17.5m × Width 2.4m × Height 2.7m, actual load capacity: 35 tons/110 cubic meters. Additional information is as follows: 1. Introduction to front-four-rear-eight: Front-four-rear-eight is a category of commercial vehicles, meaning the front steering wheels consist of two axles with four wheels, and the rear drive wheels consist of two axles (bridges) with eight wheels in total (dual wheels per axle). The term 'front-four-rear-eight' indicates four wheels at the front and eight wheels at the rear. 'Front-four' means the front has a double axle with four wheels, and 'rear-eight' also refers to a double axle, totaling eight drive wheels, with four wheels per axle (two wheels on each side of the axle). 2. Composition of front-four-rear-eight: The engine of a front-four-rear-eight vehicle drives the hydraulic pump through the transmission and power take-off device. The hydraulic tipping mechanism of the cargo compartment consists of an oil tank, hydraulic pump, distribution valve, lifting hydraulic cylinder, control valve, and oil pipes. The hydraulic tipping mechanism of the cargo compartment is composed of an oil tank, hydraulic pump, distribution valve, lifting hydraulic cylinder, control valve, and oil pipes.

10

0

Share

What is the correct way for a car to pass through deep water?

When it is confirmed that there are conditions for passage, for manual transmission models, keep the gear in first gear, maintain steady throttle pressure without lifting off the accelerator pedal and avoid pressing the clutch. Drive smoothly and slowly through the waterlogged area. The speed should preferably not exceed 20 km/h, keep the engine speed above 3000 rpm, and control the steering wheel to avoid being affected by the water flow. For automatic transmission models, shift the gear to manual first gear or L gear, because the D gear will automatically shift up or down based on vehicle speed and engine speed. Driving in water will inevitably cause the engine speed to drop when shifting up, which will suddenly reduce the exhaust pressure and create backpressure. This can cause water to be sucked into the exhaust pipe, leading to poor exhaust and stalling. Precautions for driving through waterlogged roads: Be aware of the safe wading depth of your vehicle model. The water depth must never exceed the height of the engine air intake, and you should also consider whether the height of the waves could surpass the air intake position. Additionally, consider whether water might enter the cabin. If the water depth exceeds the lower edge of the door, water will seep in through gaps. Once water enters the cabin, the floor material absorbs a large amount of water, requiring disassembly for drying or baking. Moreover, the electrical components under the floor are also prone to damage.

8

4

Share

What is the English name for Xuan Yi?

"Xuan Yi", the English name is "SYLPHY", and the Japanese name is "シルフィ". Xuan Yi is a sedan series launched by Dongfeng Nissan Passenger Vehicle Company in 1959. In terms of health, its "in-car air quality" and "in-car noise" scores lead other models in the same batch. Additional information: The first-generation model was introduced in 1959 and was initially named "Bluebird", a term derived from the famous work of Belgian writer Maeterlinck, symbolizing the wish to bring happiness to ordinary families, which aligns perfectly with the model's positioning. In 2000, Nissan launched a new generation model (Bluebird SYLPHY) to replace the previous "Bluebird" series. In 2006, the 12th generation Xuan Yi entered the Chinese market for the first time, ushering in the era of flagship family sedans with its superior comfort and space. In 2012, the 13th generation Xuan Yi was positioned as a "flagship family sedan with superior features", setting new value standards in the mid-size family sedan market. In July 2019, the 14th generation Xuan Yi accurately addressed the aesthetic and quality demands of young families in the new era, becoming a global strategic model for Nissan through the integration of Nissan Intelligent Mobility and the Nissan Global CMF platform, heralding a new era of premium family sedans.

3

Share

Is the Left-Side Overtaking Always Fully at Fault?

Left-side overtaking is not necessarily fully at fault. The traffic law clearly states that overtaking from the right side is a violation, and vehicles are strictly prohibited from overtaking on the right. Drivers who overtake from the right will be penalized with 3 demerit points and a fine, but this does not mean that left-side overtaking is entirely reasonable or legal. Here are six situations where left-side overtaking is fully at fault: 1. Oncoming traffic: Overtaking when there is a possibility of encountering oncoming traffic, resulting in an accident, is fully at fault. 2. Right side: Overtaking from the right when there is no lane on the right, resulting in an accident, is fully at fault. 3. Overtaking a vehicle that is already overtaking: Overtaking a vehicle that is in the process of overtaking, resulting in an accident, is fully at fault. 4. U-turn: Overtaking a vehicle that is making a U-turn, resulting in an accident, is fully at fault. 5. Left turn: Overtaking a vehicle that is making a left turn, resulting in an accident, is fully at fault. 6. Intersections: Overtaking at intersections, bridges, curves, steep slopes, or tunnels, resulting in an accident, is fully at fault.

10

1

Share

What is the fuel consumption of the 2021 Malibu XL 1.5T?

How Long Does It Take to Complete Vehicle Registration?

What Causes the Failure of the Auto Hold Function?

What are the dimensions of a front-four-rear-eight vehicle in meters?

What is the correct way for a car to pass through deep water?

What is the English name for Xuan Yi?

Is the Left-Side Overtaking Always Fully at Fault?

What are the requirements for starting on a slope?

How to Turn On the Heated Rearview Mirror on the Lynk & Co 03?

What is the correct way to use car air conditioning and what precautions should be taken?

Are the Audi 1.4T and Volkswagen 1.4T the same?