What is the fuel consumption of the 2013 LaCrosse 2.4?

1 Answers
DanielLynn
07/30/25 7:34am
The fuel consumption of the 2013 Buick LaCrosse 2.4 is 10-12L per 100 kilometers. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: The car consumes the most fuel during low-speed starts, so gently press the accelerator when starting to prevent excessively high RPM and effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM, as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and remove carbon deposits. 4. Avoid sudden braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to coast.
Was this review help?
8
1
Share
More Forum Discussions

What lights are turned on when reversing?

When reversing, the reverse lights are turned on. The reverse lights do not need to be manually activated; they automatically turn on when the car is shifted into reverse gear and turn off when the car exits reverse gear. There is a button on the central console for reversing, which is the hazard warning light (triangle warning light). Pressing it will automatically activate the hazard lights to alert pedestrians. Precautions for reversing: The speed should not be too fast when reversing, and it should be done in coordination with the reversing camera and rearview mirrors. The slower the speed, the more reaction time the driver has. Turn signals or hazard warning lights can be activated while reversing. Avoid turning the steering wheel while stationary, as this increases the load on the steering system and can easily wear out the tires. The brake lights and reverse lights are located in the same position when reversing, both serving to alert pedestrians.
12
3
Share

How much engine oil should be added to a Volvo XC60?

Volvo XC60 requires 5L of engine oil, and the recommended oil type is 5W30. The 'W' stands for winter, and the number before 'W' indicates the oil's low-temperature fluidity. A lower number means better low-temperature fluidity, which provides better engine protection during cold starts. The number after 'W' represents the oil's viscosity at 100 degrees Celsius. A higher number indicates higher viscosity, offering better engine protection under high-temperature conditions. The Volvo XC60 is an SUV model under Volvo Cars, with dimensions of 4688mm in length, 1902mm in width, and 1658mm in height, and a wheelbase of 2865mm. Its exterior design features Volvo's signature Thor's Hammer LED headlights, a distinctive grille design, and chrome trim. The L-shaped taillights highlight the brand's characteristics.
9
2
Share

Why Shouldn't You Restart the Engine After Stalling in Water?

If a vehicle needs to drive through a waterlogged section, there is a risk of water ingress if the water level exceeds half of the tire height. When the vehicle stalls, it is crucial not to restart the engine. Below is the relevant explanation: Reason: When water enters or surges into the engine's air intake, whether statically or dynamically, it can sometimes directly cause the engine to stall. However, the water may not have fully entered the engine cylinders at this point. Hazard: If the engine is restarted, water can directly enter the cylinders through the air intake. When the crankshaft pushes the connecting rod to compress toward the piston, water cannot be compressed. The resulting large counterforce can bend the connecting rod. Depending on the force applied, some bends may be visibly noticeable. Some vehicle models may experience slight deformation initially, but over time, the deformation can worsen. Severe bending of the connecting rod can lead to the risk of puncturing the engine block.
14
4
Share

What are the reasons for the engine warning light in Mercedes-Benz W221?

Sensor issues, car maintenance problems, fuel quality issues, poor combustion of the air-fuel mixture, engine intake problems, turbocharging issues, exhaust problems, and the anti-theft system are the main reasons for the engine warning light to illuminate. Additionally, when the car is started, the vehicle performs a self-check on the engine system. Normally, the engine warning light should turn off after the self-check is completed. If it remains on for an extended period, it is advisable to visit a repair station promptly for professional assistance to diagnose and eliminate potential safety hazards. The following is a detailed explanation of each type of fault: Sensor issues: Sensors include coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruptions, the car's ECU cannot accurately obtain engine data, causing the engine warning light to illuminate. In such cases, it is essential to visit a repair center promptly for professional diagnosis and elimination of safety hazards. Maintenance issues: Poor engine maintenance is the most common cause of the engine warning light illuminating. Vehicles have specific maintenance cycles. If maintenance is not performed on schedule, combined with poor driving habits, the engine's operational burden increases, eventually triggering the engine warning light to alert the owner of a fault. Fuel quality issues: This refers to both fuel and engine oil. The fuel used in cars typically has a specific octane rating, while engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend which fuel octane rating and type of engine oil to use. If the owner fails to adhere to these recommendations, prolonged use can lead to engine wear, causing the warning light to illuminate. It is important to use the correct fuel octane rating and appropriate engine oil as specified for the vehicle. Poor combustion of the air-fuel mixture: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can lead to poor combustion of the air-fuel mixture in the engine. This results in engine carbon buildup or knocking, which is detected by the oxygen sensors and reported to the ECU, triggering the warning light as an alert. Intake problems: Engine combustion requires air intake, and the air filter plays a crucial role in this process. If the air filter is dirty or not cleaned regularly, it can affect the engine's air intake, potentially leading to blockages over time. In severe cases, this can cause the engine warning light to illuminate. Turbocharging issues: Problems with the intake turbocharging pipes or the turbocharger itself can also cause the engine warning light to illuminate. The most common issue is a damaged turbocharger, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust problems: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can trigger the engine warning light. The most common issue is a faulty catalytic converter. Factors such as using leaded gasoline, lead- or silicon-based oil additives, physical damage to the catalytic converter, or fuel system malfunctions can contribute to catalytic converter failure. Anti-theft system: If the car's electronic anti-theft system malfunctions or if the anti-theft controller is incompatible with the engine's electronic controller, the anti-theft system can prevent the engine from operating correctly, causing the warning light to illuminate. Solutions for the engine warning light: If the engine warning light is on and the car cannot start, this may be due to a faulty fuel pump or ignition components. It is recommended to call for assistance immediately. If the engine warning light is on and the car can still be driven but exhibits severe shaking or loss of acceleration, pull over safely and call for roadside assistance. If the engine warning light is on but the car drives normally, this may indicate a faulty sensor. In this case, you can continue driving cautiously at low to moderate speeds but should visit a repair shop as soon as possible to diagnose and address the issue.
18
2
Share

How often should a private car be inspected after six years?

Private cars that have been in use for 6 years will be subject to biennial inspections. Vehicles that have already passed the annual inspection must undergo the inspection before the expiration date. The new regulations include 7 to 9-seater non-operational mini and micro passenger vehicles (excluding vans) within the 6-year exemption period. For non-operational mini and micro passenger vehicles (excluding vans) that have been in use for more than 6 years but less than 10 years, the inspection frequency is adjusted from once a year to once every two years. Below are the relevant details: Regulations: According to the newly revised "Motor Vehicle Registration Regulations," the owner of a motor vehicle can apply for an inspection compliance mark at the vehicle registration office within 3 months before the expiration of the vehicle's inspection validity period. Precautions: Before applying, the vehicle owner must resolve all traffic violations and accidents related to the vehicle.
19
0
Share

How often should a private car generally have its refrigerant recharged?

For average-performance cars, the refrigerant recharge cycle is shorter, typically requiring a recharge within two years. High-performance vehicles have a longer recharge cycle, often needing a recharge only after eight years. Below are some precautions for car refrigerant recharge: Before recharging: It is necessary to use a pressure vacuum machine to pressurize and check for leaks. If any leaks are found, components of the air conditioning system such as the air conditioning pipe joints, condenser, evaporator, compressor, etc., should be inspected by spraying foam water. Any detected leaks should be repaired or replaced. Vacuuming: It is essential to vacuum for at least half an hour to prevent water vapor from remaining in the pipes. Connect the refrigerant gauge to the air conditioning system and vacuum, focusing on the low-pressure side. Generally, there's no need to monitor the negative pressure value during vacuuming; three minutes is sufficient. After this, tighten the switch on the low-pressure gauge and connect the refrigerant tank for filling.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.